hwEntDspAttributeTable OBJECT IDENTIFIER ::= { hwEntVoiceCommonMIB 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.253.5.1 | hwEntDspFaxMaxTrainRate | 0 | 0 | Indicates the maximum fax training rate. Options: v17(1) v29(2) v27(3) Default: v17(1) |
1.3.6.1.4.1.2011.5.25.253.5.2 | hwEntDspFaxTrainMode | 0 | 0 | Indicates the fax training mode. Options: e2e(1) local(2) Default: e2e(1) |
1.3.6.1.4.1.2011.5.25.253.5.3 | hwEntDspCodeType | 0 | 0 | Indicates the default coding type of DSP channel. Options: g711A(1) g711u(2) g723(3) g729(4) g726by16k(5) g726by24k(6) g726by32k(7) g726… |
1.3.6.1.4.1.2011.5.25.253.5.4 | hwEntDspRtcpPackageSendInterval | 0 | 0 | Indicates the RTCP packet sending interval of DSP channel. The valid value must be no less than 500, 0 indicates that the parame… |
1.3.6.1.4.1.2011.5.25.253.5.5 | hwEntDspRtpPacketInterval | 0 | 0 | Indicates the default RTP packet time of DSP channel. Options: 1. pt5ms(1) 2. pt10ms(2) 3. pt20ms(3) 4. pt30ms(4) Default: pt20ms(3) |
1.3.6.1.4.1.2011.5.25.253.5.6 | hwEntDspEchoCheck | 0 | 0 | Indicates whether to enable echo check of DSP channel. Options: enable(1) disable(2) Default: enable(1) |
1.3.6.1.4.1.2011.5.25.253.5.7 | hwEntDspSilenceReduce | 0 | 0 | Indicates whether to enable silence compression of DSP channel. Options: enable(1) disable(2) Default: disable(2) |
1.3.6.1.4.1.2011.5.25.253.5.8 | hwEntDspClearmodePayload | 0 | 0 | Indicates the default payload type of the DSP channel clearmode (it must not conflict with the payload used). Default: 100 |
1.3.6.1.4.1.2011.5.25.253.5.9 | hwEntDspSevereDegradethreshold | 0 | 0 | Indicates the default threshold of severely packet loss seconds. Default: 400 |
1.3.6.1.4.1.2011.5.25.253.5.10 | hwEntDspBvqm | 0 | 0 | Indicates the VQM switch. Options: enable(1) disable(2) Default: disable(2) |
1.3.6.1.4.1.2011.5.25.253.5.11 | hwEntDspPlc | 0 | 0 | Indicates the DSP packet loss compensation algorithm. Options: enable(1) disable(2) Default: disable(2) |
1.3.6.1.4.1.2011.5.25.253.5.12 | hwEntDspMinAdaptJitterBuffer | 0 | 0 | Minimum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer Unit: ms |
1.3.6.1.4.1.2011.5.25.253.5.13 | hwEntDspMaxAdaptJitterBuffer | 0 | 0 | Maximum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer Unit: ms |
1.3.6.1.4.1.2011.5.25.253.5.14 | hwEntDspInitAdaptJitterBuffer | 0 | 0 | Initial adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer Unit: ms |
1.3.6.1.4.1.2011.5.25.253.5.15 | hwEntDspMinFixedJitterBuffer | 0 | 0 | Minimum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer Unit: ms |
1.3.6.1.4.1.2011.5.25.253.5.16 | hwEntDspMaxFixedJitterBuffer | 0 | 0 | Maximum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer Unit: ms |
1.3.6.1.4.1.2011.5.25.253.5.17 | hwEntDspNormalFixedJitterBuffer | 0 | 0 | Initial fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer Unit: ms |
1.3.6.1.4.1.2011.5.25.253.5.18 | hwEntDspRedundancyPayload | 0 | 0 | Indicates the payload type value of redundancy (it must not conflict with the payload used). Default: 96 |
1.3.6.1.4.1.2011.5.25.253.5.19 | hwEntDspRedundancyT30 | 0 | 0 | Indicates the T30 redundancy parameter of T38 Fax. Default: 3 |
1.3.6.1.4.1.2011.5.25.253.5.20 | hwEntDspRedundancyT4 | 0 | 0 | Indicates the T4 redundancy parameter of T38 Fax. Default: 3 |
1.3.6.1.4.1.2011.5.25.253.5.21 | hwEntDspFaxV8Negotiate | 0 | 0 | Indicates the switch of the V8 negotiation of FAX. Options: enable(1) disable(2) Default: disable(2) |
1.3.6.1.4.1.2011.5.25.253.5.22 | hwEntDspRTCPXR | 0 | 0 | The switch of RTCP XR. Options: enable(1) -enable RTCP XR disable(2) -disable RTCP XR Default: enable(1) |
1.3.6.1.4.1.2011.5.25.253.5.23 | hwEntDspVbdPayload | 0 | 0 | Indicates the payload type value of VBD (it must not conflict with the payload used). Default: 102 |
1.3.6.1.4.1.2011.5.25.253.5.24 | hwEntDspRfcNtePayload | 0 | 0 | Indicates the payload type value of nte (it must not conflict with the payload used). Default: 97 |
1.3.6.1.4.1.2011.5.25.253.5.25 | hwEntDspG726R16kPayload | 0 | 0 | Indicates the payload type value of G.726-16k (it must not conflict with the payload used). Default: 103 |
1.3.6.1.4.1.2011.5.25.253.5.26 | hwEntDspG726R24kPayload | 0 | 0 | Indicates the payload type value of G.726-24k (it must not conflict with the payload used). Default: 104 |
1.3.6.1.4.1.2011.5.25.253.5.27 | hwEntDspG726R32kPayload | 0 | 0 | Indicates the payload type value of G.726-32k (it must not conflict with the payload used). Default: 101 |
1.3.6.1.4.1.2011.5.25.253.5.28 | hwEntDspG726R40kPayload | 0 | 0 | Indicates the payload type value of G.726-40k (it must not conflict with the payload used). Default: 105 |
1.3.6.1.4.1.2011.5.25.253.5.29 | hwEntDspAutoVBDSwitchMode | 0 | 0 | VBD switch mode. Options: 1. hostControl(1) -host control 2. autoSwitch(2) -auto switch Default: hostControl(1) |
1.3.6.1.4.1.2011.5.25.253.5.30 | hwEntDspAlarmAdaptJitterBuffer | 0 | 0 | Adapt jitterbuffer of DSP alarm threshold. Default: 150 Unit: ms |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.253.1 | hwEntServiceModeTable | 2 | 2 | None |
1.3.6.1.4.1.2011.5.25.253.2 | hwEntUserDefineRingTypeTable | 1 | 8 | This table is used to set the user-defined ring type. The index of this table is hwEntUserDefineRingType. |
1.3.6.1.4.1.2011.5.25.253.3 | hwEntRingModeTable | 1 | 7 | This table is used to set the ring mode. The indexes of this table are hwEntRingModeMgId, hwEntRingModeIndex. |
1.3.6.1.4.1.2011.5.25.253.4 | hwEntSipStackParametersTable | 13 | 13 | None |
1.3.6.1.4.1.2011.5.25.253.6 | hwEntDspTemplateTable | 1 | 14 | This table is used to config the dsp parameters template. The index of this table is hwEntDspTemplateName. |
1.3.6.1.4.1.2011.5.25.253.7 | hwEntServiceNumTable | 1 | 4 | This table is used to config the binding between service number and DSP parameters template. The index of this table is hwEntSer… |
1.3.6.1.4.1.2011.5.25.253.8 | hwEntDspOperTable | 1 | 18 | This table is used to config the operation of DSP channel. The index of this table are hwEntDspDimmIndex, hwEntDspChannelIndex. |
1.3.6.1.4.1.2011.5.25.253.9 | hwEntDspStatisticsTable | 1 | 9 | This table is used to query the DSP channel statistics. The index of this table is hwEntDspDimmIndex. |
1.3.6.1.4.1.2011.5.25.253.10 | hwEntDspOverloadResourceTable | 4 | 4 | None |
1.3.6.1.4.1.2011.5.25.253.11 | hwEntBandwidthParaTable | 3 | 3 | None |
1.3.6.1.4.1.2011.5.25.253.12 | hwEntClipParaTable | 12 | 12 | None |