MPU memory exhaust.
Parsed from file HUAWEI-DC-TRAP-MIB.mib.txt
Company: huawei
Module: HUAWEI-DC-TRAP-MIB
hwMemoryExhaust NOTIFICATION-TYPE STATUS current DESCRIPTION "MPU memory exhaust." ::= { hwDCTraps 149 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.2011.5.25.37.2.100 | hwWriteFlashError | 0 | 0 | write flash error! |
| 1.3.6.1.4.1.2011.5.25.37.2.101 | hwBoardReset | 0 | 0 | board reset! |
| 1.3.6.1.4.1.2011.5.25.37.2.102 | hwBoardResetSuccess | 0 | 0 | board reset success! |
| 1.3.6.1.4.1.2011.5.25.37.2.103 | hwSlaveMPUReset | 0 | 0 | slave MPU reset ! |
| 1.3.6.1.4.1.2011.5.25.37.2.104 | hwMasterSlaveSwap | 0 | 0 | master slave swap! |
| 1.3.6.1.4.1.2011.5.25.37.2.105 | hwRTCFail | 0 | 0 | RTC failure! |
| 1.3.6.1.4.1.2011.5.25.37.2.106 | hwExchangeChipFail | 0 | 0 | 5695 exchange chip fail! |
| 1.3.6.1.4.1.2011.5.25.37.2.107 | hwTempResume | 0 | 0 | Board temprature over threshold resume! |
| 1.3.6.1.4.1.2011.5.25.37.2.108 | hwOpticalModuleInsert | 0 | 0 | optical module plug in ! |
| 1.3.6.1.4.1.2011.5.25.37.2.109 | hwOpticalModuleRemove | 0 | 0 | optical module plug out ! |
| 1.3.6.1.4.1.2011.5.25.37.2.110 | hwFPGAAbnormal | 0 | 0 | FPGA abnormal ! |
| 1.3.6.1.4.1.2011.5.25.37.2.111 | hwMinMTunnelDownAlarm | 0 | 0 | For Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package can't arrive t… |
| 1.3.6.1.4.1.2011.5.25.37.2.112 | hwMinMTunnelUpAlarm | 0 | 0 | For Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac in mac tunnel, … |
| 1.3.6.1.4.1.2011.5.25.37.2.113 | hwInterfacePhysicalDown | 0 | 0 | This trap is to indicate port link down on physical layer. |
| 1.3.6.1.4.1.2011.5.25.37.2.114 | hwInterfacePhysicalUp | 0 | 0 | This trap is to indicate port link up on physical layer. |
| 1.3.6.1.4.1.2011.5.25.37.2.119 | hwBTBStartupFileNameDifferent | 0 | 0 | In the BTB system ,the start-up file name of master and slave chassis is different . Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.120 | hwBTBChassisRunningModeConflict | 0 | 0 | The Master and Slave chassises running modes conflict.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.121 | hwBTBCtrlChannelFail | 0 | 0 | The FE control channel failture, as physical link from up to down or channel blocked. Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.122 | hwBTBCtrlChannelFailResume | 0 | 0 | The FE control channel failture resume.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.123 | hwBTBDataChannelFail | 0 | 0 | The data channel failture, all optical links down between chassises.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.124 | hwBTBDataChannelFailResume | 0 | 0 | The data channel failture resume.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.125 | hwBTBClkChannelFail | 0 | 0 | The clock channel failture, clock link down between chassises.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.126 | hwBTBClkChannelFailResume | 0 | 0 | The clock Channel failture resume.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.127 | hwBTBSFUOpticInterfaceError | 0 | 0 | The optical fiber connection error, the connection of SFU fiber between chassises is not correct. Used for BTB or its extend sys… |
| 1.3.6.1.4.1.2011.5.25.37.2.128 | hwBTBSFUOpticInterfaceErrorResume | 0 | 0 | The optical fiber connection error resume.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.129 | hwBTBVSRInterfaceInvalid | 0 | 0 | The SFU VSR(very short reach) interface invalid.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.130 | hwBTBVSRInterfaceInvalidResume | 0 | 0 | The SFU VSR(very short reach) interface invalid resume.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.131 | hwBTBSlaveChassisNoHeart | 0 | 0 | The slave chassis no heart.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.132 | hwBTBNoSlaveChassis | 0 | 0 | No slave chassis connected to the master chassis in the BTB system.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.133 | hwBTBSlaveChassisRegisted | 0 | 0 | The slave chassis registe successful.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.134 | hwBTBSlaveChassisRegisteFail | 0 | 0 | The slave chassis registe failed.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.135 | hwBTBChassisTypeConflict | 0 | 0 | The chassis information conflict in the PAF and Nvram.Used for BTB or its extend system. |
| 1.3.6.1.4.1.2011.5.25.37.2.136 | hwSuperChangeSuccesful | 0 | 0 | Super change successful. |
| 1.3.6.1.4.1.2011.5.25.37.2.137 | hwSuperChangeFailure | 0 | 0 | Super change Failure. |
| 1.3.6.1.4.1.2011.5.25.37.2.138 | hwOpticaPowerAbnormal | 0 | 0 | Optical Transceiver power abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.139 | hwEpldAbnormal | 0 | 0 | Epld logic abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.140 | hwPhyChipAbnormal | 0 | 0 | PHY chip is abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.141 | hwSerdesAbnormal | 0 | 0 | Serdes interface of PHY chip abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.142 | hwBoardAbnormal | 0 | 0 | Board is abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.143 | hwFeChannelAbnormal | 0 | 0 | FE data channel is abnormal |
| 1.3.6.1.4.1.2011.5.25.37.2.144 | hwParityCheckAbnormal | 0 | 0 | Data parity check is abnormal |
| 1.3.6.1.4.1.2011.5.25.37.2.145 | hwPhyClockAbnormal | 0 | 0 | The clock of PHY chip is abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.146 | hwPortAutoNegotiateFail | 0 | 0 | The ethernet port negotiate failed |
| 1.3.6.1.4.1.2011.5.25.37.2.147 | hwPortSemiduplex | 0 | 0 | The ethernet port work at semi duplex state. |
| 1.3.6.1.4.1.2011.5.25.37.2.148 | hwScuStartModeSetFail | 0 | 0 | The start mode of SCU set failed |
| 1.3.6.1.4.1.2011.5.25.37.2.150 | hwMemoryExhaustClear | 0 | 0 | MPU memory usage resume to normal. |
| 1.3.6.1.4.1.2011.5.25.37.2.151 | hwMethAbnormal | 0 | 0 | The Meth interface is abnormal. |
| 1.3.6.1.4.1.2011.5.25.37.2.152 | hwLpuNotTight | 0 | 0 | The LPU board is not tightly installed. Install the board again. |
| 1.3.6.1.4.1.2011.5.25.37.2.153 | hwLicenseFail | 0 | 0 | License fail. |
| 1.3.6.1.4.1.2011.5.25.37.2.154 | hwHaBatchBegin | 0 | 0 | No command line can be entered because batch backup is processing. |
| 1.3.6.1.4.1.2011.5.25.37.2.155 | hwHaBatchEnd | 0 | 0 | Command lines can be entered because batch backup ends. |
| 1.3.6.1.4.1.2011.5.25.37.2.156 | hwHaSmoothBegin | 0 | 0 | No command line can be entered because data smooth is processing. |
| 1.3.6.1.4.1.2011.5.25.37.2.157 | hwHaSmoothEnd | 0 | 0 | Command lines can be entered because data smooth ends. |
| 1.3.6.1.4.1.2011.5.25.37.2.158 | hwFanUp | 0 | 0 | Fan register! |
| ... | ||||