Board power status change!
Parsed from file HUAWEI-DC-TRAP-MIB.mib.txt
Company: huawei
Module: HUAWEI-DC-TRAP-MIB
hwBoardOfflineChange NOTIFICATION-TYPE OBJECTS { entPhysicalName } STATUS current DESCRIPTION "Board power status change!" ::= { hwDCTraps 72 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.2011.5.25.37.2.22 | hwClkNoHeartbeat | 0 | 0 | CLK No Heartbeat! |
1.3.6.1.4.1.2011.5.25.37.2.23 | hwClkNoHeartbeatResume | 0 | 0 | CLK No Heartbeat resume! |
1.3.6.1.4.1.2011.5.25.37.2.24 | hwLPULostSynAlarm | 0 | 0 | LPU SERDES interface is lost synchronization! |
1.3.6.1.4.1.2011.5.25.37.2.25 | hwLPUOpenChannelError | 0 | 0 | LPU SERDES interface open error! |
1.3.6.1.4.1.2011.5.25.37.2.26 | hwLPUSlfTstErr | 0 | 0 | LPU self test error! |
1.3.6.1.4.1.2011.5.25.37.2.27 | hwLPU3ClkSwitch | 0 | 0 | LPU 3 class clock is switch! |
1.3.6.1.4.1.2011.5.25.37.2.28 | hwSFULostHrtReset | 0 | 0 | SFU is reset because of heart beat loss! |
1.3.6.1.4.1.2011.5.25.37.2.29 | hwSFULinkLostReset | 0 | 0 | SFU is reset because of SERDES interface input channel link lost numbers over threshold! |
1.3.6.1.4.1.2011.5.25.37.2.30 | hwSFUChannelLinkLost | 0 | 0 | SFU check SERDES interface input channel link lost! |
1.3.6.1.4.1.2011.5.25.37.2.31 | hwSFUInChannelOpenFail | 0 | 0 | SFU SERDES interface input channel is opened failed! |
1.3.6.1.4.1.2011.5.25.37.2.32 | hwVoltSensorFail | 0 | 0 | Board voltage monitor failure! |
1.3.6.1.4.1.2011.5.25.37.2.33 | hwVoltSensorFailResume | 0 | 0 | Board voltage monitor failure resume! |
1.3.6.1.4.1.2011.5.25.37.2.34 | hwVoltBtmC | 0 | 0 | Board voltage below fatal threshold! |
1.3.6.1.4.1.2011.5.25.37.2.35 | hwVoltBtmCResume | 0 | 0 | Board voltage below fatal threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.36 | hwVoltSprC | 0 | 0 | Board voltage over fatal threshold! |
1.3.6.1.4.1.2011.5.25.37.2.37 | hwVoltSprCResume | 0 | 0 | Board voltage over fatal threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.38 | hwVoltBtmM | 0 | 0 | Board voltage below major threshold! |
1.3.6.1.4.1.2011.5.25.37.2.39 | hwVoltBtmMResume | 0 | 0 | Board voltage below major threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.40 | hwVoltSprM | 0 | 0 | Board voltage over major threshold! |
1.3.6.1.4.1.2011.5.25.37.2.41 | hwVoltSprMResume | 0 | 0 | Board voltage over major threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.42 | hwTempSensorFail | 0 | 0 | Board temprature monitor failure! |
1.3.6.1.4.1.2011.5.25.37.2.43 | hwTempSensorFailResume | 0 | 0 | Board temperature monitor failure resume! |
1.3.6.1.4.1.2011.5.25.37.2.44 | hwTempMnr | 0 | 0 | Board temperature over minor threshold! |
1.3.6.1.4.1.2011.5.25.37.2.45 | hwTempMnrResume | 0 | 0 | Board temperature over minor threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.46 | hwTempMjr | 0 | 0 | Board temperature over major threshold! |
1.3.6.1.4.1.2011.5.25.37.2.47 | hwTempMjrResume | 0 | 0 | Board temperature over major threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.48 | hwTempCtl | 0 | 0 | Board temperature over fatal threshold! |
1.3.6.1.4.1.2011.5.25.37.2.49 | hwTempCtlResume | 0 | 0 | Board temperature over fatal threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.50 | hwFanHFail | 0 | 0 | Fan hardware failure! |
1.3.6.1.4.1.2011.5.25.37.2.51 | hwFanFail | 0 | 0 | Fan failure! |
1.3.6.1.4.1.2011.5.25.37.2.52 | hwFanFailResume | 0 | 0 | Fan failure resume! |
1.3.6.1.4.1.2011.5.25.37.2.53 | hwFanAbsent | 0 | 0 | Fan absent! |
1.3.6.1.4.1.2011.5.25.37.2.54 | hwFanAbsentResume | 0 | 0 | Fan absent resume! |
1.3.6.1.4.1.2011.5.25.37.2.55 | hwFanCabUN | 0 | 0 | Fan cable unplugged! |
1.3.6.1.4.1.2011.5.25.37.2.56 | hwFanCabUNResume | 0 | 0 | Fan cable unplugged resume! |
1.3.6.1.4.1.2011.5.25.37.2.57 | hwPwrFail | 0 | 0 | Power failure! |
1.3.6.1.4.1.2011.5.25.37.2.58 | hwPwrFailResume | 0 | 0 | Power failure resume! |
1.3.6.1.4.1.2011.5.25.37.2.59 | hwPwrAbsent | 0 | 0 | Power absent! |
1.3.6.1.4.1.2011.5.25.37.2.60 | hwPwrAbsentResume | 0 | 0 | Power absent resume! |
1.3.6.1.4.1.2011.5.25.37.2.61 | hwPwrCabUN | 0 | 0 | Power monitor cable unplugged! |
1.3.6.1.4.1.2011.5.25.37.2.62 | hwPwrCabUNResume | 0 | 0 | Power monitor cable unplugged resume! |
1.3.6.1.4.1.2011.5.25.37.2.63 | hwLCDHFail | 0 | 0 | LCD hardware failure! |
1.3.6.1.4.1.2011.5.25.37.2.64 | hwLCDFail | 0 | 0 | LCD failure! |
1.3.6.1.4.1.2011.5.25.37.2.65 | hwLCDAbsent | 0 | 0 | LCD absent! |
1.3.6.1.4.1.2011.5.25.37.2.66 | hwLCDAbsentResume | 0 | 0 | LCD absent resume! |
1.3.6.1.4.1.2011.5.25.37.2.67 | hwLCDCabUN | 0 | 0 | LCD cable unplugged! |
1.3.6.1.4.1.2011.5.25.37.2.68 | hwLCDCabUNResume | 0 | 0 | LCD cable unplugged resume! |
1.3.6.1.4.1.2011.5.25.37.2.69 | hwROMFail | 0 | 0 | EEPROM failure! |
1.3.6.1.4.1.2011.5.25.37.2.70 | hwMonitorBUSFail | 0 | 0 | MonitorBUS failure! |
1.3.6.1.4.1.2011.5.25.37.2.71 | hwMonitorBUSFailResume | 0 | 0 | MonitorBUS failure resume! |
1.3.6.1.4.1.2011.5.25.37.2.100 | hwWriteFlashError | 0 | 0 | write flash error! |
1.3.6.1.4.1.2011.5.25.37.2.101 | hwBoardReset | 0 | 0 | board reset! |
1.3.6.1.4.1.2011.5.25.37.2.102 | hwBoardResetSuccess | 0 | 0 | board reset success! |
1.3.6.1.4.1.2011.5.25.37.2.103 | hwSlaveMPUReset | 0 | 0 | slave MPU reset ! |
1.3.6.1.4.1.2011.5.25.37.2.104 | hwMasterSlaveSwap | 0 | 0 | master slave swap! |
1.3.6.1.4.1.2011.5.25.37.2.105 | hwRTCFail | 0 | 0 | RTC failure! |
1.3.6.1.4.1.2011.5.25.37.2.106 | hwExchangeChipFail | 0 | 0 | 5695 exchange chip fail! |
1.3.6.1.4.1.2011.5.25.37.2.107 | hwTempResume | 0 | 0 | Board temprature over threshold resume! |
1.3.6.1.4.1.2011.5.25.37.2.108 | hwOpticalModuleInsert | 0 | 0 | optical module plug in ! |
1.3.6.1.4.1.2011.5.25.37.2.109 | hwOpticalModuleRemove | 0 | 0 | optical module plug out ! |
1.3.6.1.4.1.2011.5.25.37.2.110 | hwFPGAAbnormal | 0 | 0 | FPGA abnormal ! |
1.3.6.1.4.1.2011.5.25.37.2.111 | hwMinMTunnelDownAlarm | 0 | 0 | For Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package can't arrive t… |
1.3.6.1.4.1.2011.5.25.37.2.112 | hwMinMTunnelUpAlarm | 0 | 0 | For Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac in mac tunnel, … |
1.3.6.1.4.1.2011.5.25.37.2.113 | hwInterfacePhysicalDown | 0 | 0 | This trap is to indicate port link down on physical layer. |
1.3.6.1.4.1.2011.5.25.37.2.114 | hwInterfacePhysicalUp | 0 | 0 | This trap is to indicate port link up on physical layer. |
1.3.6.1.4.1.2011.5.25.37.2.119 | hwBTBStartupFileNameDifferent | 0 | 0 | In the BTB system ,the start-up file name of master and slave chassis is different . Used for BTB or its extend system. |
1.3.6.1.4.1.2011.5.25.37.2.120 | hwBTBChassisRunningModeConflict | 0 | 0 | The Master and Slave chassises running modes conflict.Used for BTB or its extend system. |
1.3.6.1.4.1.2011.5.25.37.2.121 | hwBTBCtrlChannelFail | 0 | 0 | The FE control channel failture, as physical link from up to down or channel blocked. Used for BTB or its extend system. |
1.3.6.1.4.1.2011.5.25.37.2.122 | hwBTBCtrlChannelFailResume | 0 | 0 | The FE control channel failture resume.Used for BTB or its extend system. |
... |