The value of this object identifies the type of the destination address of the BFD
session for PW.
Parsed from file HUAWEI-BFD-MIB.mib.txt
Company: huawei
Module: HUAWEI-BFD-MIB
hwBfdSessConfRemotePeerIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the type of the destination address of the BFD session for PW. " ::= { hwBfdSessionConfEntry 44 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.1 | hwBfdSessConfName | 0 | 0 | It is the name of this configuration model. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.2 | hwBfdSessConfMIndex | 0 | 0 | It is the configuration index of this session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.3 | hwBfdSessConfLocalDiscr | 0 | 0 | Define the local discriminator of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.4 | hwBfdSessConfRemoteDiscr | 0 | 0 | Define the remote discriminator of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.5 | hwBfdSessConfPeerAddr | 0 | 0 | Define the IP address of the peer in the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.6 | hwBfdSessConfBindIfIndex | 0 | 0 | It is the index of the binding interface in the BFD configuration. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.7 | hwBfdSessConfBindIfName | 0 | 0 | It is the name of the binding interface in the BFD configuration. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.8 | hwBfdSessConfDemandEnable | 0 | 0 | It is the flag of the BFD demand mode. Options: 1. disabled(0) -disable the BFD demand mode 2. enabled(1) -enable the BFD demand … |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.9 | hwBfdSessConfDemandTimerInterval | 0 | 0 | Define the detecting interval in the BFD session with the demand mode. Unit: millisecond |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.10 | hwBfdSessConfDetectMult | 0 | 0 | It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detec… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.11 | hwBfdSessConfDesiredMinRxInterval | 0 | 0 | This is the minimum interval of the configuration,in milliseconds, between received BFD Control packets that this system is capab… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.12 | hwBfdSessConfDesiredMinTxInterval | 0 | 0 | This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.13 | hwBfdSessConfWTRInterval | 0 | 0 | The wait-to-restore (WTR) time of the BFD session. The event that indicates the session changing into the Up state is reported to… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.14 | hwBfdSessConfTOS | 0 | 0 | This is the TOS value of bfd packet. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.15 | hwBfdSessConfPSTFlag | 0 | 0 | The PST flag of the BFD session configuration. It indicates the status association between the current BFD session and the interf… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.16 | hwBfdSessConfCommitFlag | 0 | 0 | It is the commit flag of the configuration entry. Options: 1. notCommit(0) -not commit 2. commit(1) -commit |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.17 | hwBfdSessConfAdminStatus | 0 | 0 | A BFD session can be administratively enabled or disabled. The AdminStatus field indicates the BFD session status. Options: 1. 0 -… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.18 | hwBfdSessConfRowStatus | 0 | 0 | Used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.19 | hwBfdSessConfSourceAddr | 0 | 0 | Define the source IP address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.20 | hwBfdSessConfVrfIndex | 0 | 0 | The index of the VPN interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.21 | hwBfdSessConfVPNName | 0 | 0 | The name of VPN interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.22 | hwBfdSessConfDefaultIp | 0 | 0 | BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use … |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.23 | hwBfdSessConfPISFlag | 0 | 0 | The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interf… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.24 | hwBfdSessConfBindType | 0 | 0 | The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BF… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.25 | hwBfdSessConfNextHop | 0 | 0 | It is the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.26 | hwBfdSessConfStaticLspName | 0 | 0 | It is the static LSP name of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.27 | hwBfdSessConfPWSecondaryFlag | 0 | 0 | The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2)-secondary PW 3. flagNoPW(… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.28 | hwBfdSessConfTunnelDetectType | 0 | 0 | Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Ne… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.29 | hwBfdSessConfVcId | 0 | 0 | It is the ID of VC. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.30 | hwBfdSessConfVsiName | 0 | 0 | It is the name of VSI. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.31 | hwBfdSessConfVsiPeerAddr | 0 | 0 | It is the peer-ip of VSI. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.32 | hwBfdSessConfDiscrAuto | 0 | 0 | Describe whether the discriminator can be auto allocated. Options: 1.enabled(1) -the discriminator can be allocated automaticall… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.33 | hwBfdSessConfPeerIpv6Addr | 0 | 0 | Define the peer IPv6 address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.34 | hwBfdSessConfSourceIpv6Addr | 0 | 0 | Define the source IPv6 address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.35 | hwBfdSessConfIpv6NextHop | 0 | 0 | It is the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.36 | hwBfdSessConfIsIpv6Addr | 0 | 0 | Whether the peer address of the BFD session is IPv6 address. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.37 | hwBfdSessConfKeychainName | 0 | 0 | Specify the name of the keychain for authentication. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.38 | hwBfdSessConfMeticulous | 0 | 0 | Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.39 | hwBfdSessConfLooseAuthentication | 0 | 0 | Whether loose authentication check. Options: 1.True(1) -loose-check 2.False(2) -do not loose-check |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.40 | hwBfdSessConfOneArmEcho | 0 | 0 | The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the ses… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.41 | hwBfdSessConfMinEchoRxInterval | 0 | 0 | The value of this object identifies the minimum interval between received BFD Control packets, in milliseconds.This value reflec… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.42 | hwBfdSessConfPWTtlMode | 0 | 0 | The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicat… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.43 | hwBfdSessConfPWTtl | 0 | 0 | The value of this object identifies the TTL used by the BFD session for PW. The vlaue is configurable only when the configuratio… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.45 | hwBfdSessConfRemotePeerIp | 0 | 0 | The value of this object identifies the destination IP address of the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.46 | hwBfdSessConfSelectBoard | 0 | 0 | This object indicates the main processing board of a BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.47 | hwBfdSessConfPWSPE | 0 | 0 | The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -ind… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.48 | hwBfdSessConfPWTrackIfName | 0 | 0 | This object indicates the interface monitored by the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.49 | hwBfdSessConfIsPWTrackIf | 0 | 0 | The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. e… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.50 | hwBfdSessConfEncapsulationType | 0 | 0 | The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell v… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.51 | hwBfdSessConfPEVid | 0 | 0 | The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-inter… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.52 | hwBfdSessConfCEVid | 0 | 0 | The value of this object identifies the inner tag in QinQ packets. |