This object identifies which locally initiated test is
active.
Parsed from file crcnp64.mib.txt
Company: paradyne
Module: CRC-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
crc64SSLocalInitiatedTest OBJECT-TYPE SYNTAX INTEGER { clear(1), bertNwk(2), loopToNwk(3), bertUsr(4), loopToUsr(5), testPktsToNwk(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies which locally initiated test is active." ::= { crc64SGSysStatus 25 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2066.1.5.1.25.0 | crc64SSLocalInitiatedTest | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2066.1.5.1.1 | crc64SSRxLevel | 1 | 1 | This object identifies Rx Level. |
1.3.6.1.4.1.2066.1.5.1.2 | crc64SSDataRate | 1 | 1 | This object identifies the calculated data rate in Kbps. |
1.3.6.1.4.1.2066.1.5.1.3 | crc64SSCarrierLoss | 1 | 1 | This object identifies the current state of the DDS carrier signal. |
1.3.6.1.4.1.2066.1.5.1.4 | crc64SSOutOfService | 1 | 1 | This object identifies the current status of the DDS line. |
1.3.6.1.4.1.2066.1.5.1.5 | crc64SSCsuLoop | 1 | 1 | This object identifies CSU loop status. |
1.3.6.1.4.1.2066.1.5.1.6 | crc64SSDsuLoop | 1 | 1 | This object identifies DSU loop status. |
1.3.6.1.4.1.2066.1.5.1.7 | crc64SSDsuFault | 1 | 1 | This object indicates the status of the self test diagnostic performed by the unit. |
1.3.6.1.4.1.2066.1.5.1.8 | crc64SSUsrDtr | 1 | 1 | This object identifies DTR status of User Side Interface, which is a High Speed Interface parameter. |
1.3.6.1.4.1.2066.1.5.1.9 | crc64SSUsrInterfaceType | 1 | 1 | This object identifies Interface Type of the User Side Interface, which is a High Speed Interface. |
1.3.6.1.4.1.2066.1.5.1.10 | crc64SSUsrPower | 1 | 1 | This object identifies Power Status of the User Side Interface, which is a High Speed Interface. |
1.3.6.1.4.1.2066.1.5.1.11 | crc64SSUsrRts | 1 | 1 | This object identifies RTS status of the User Side Interface, which is a High Speed Interface. |
1.3.6.1.4.1.2066.1.5.1.12 | crc64SSModemFault | 1 | 1 | This object identifies the status of the last self test diagnostic performed by the unit on the modem. |
1.3.6.1.4.1.2066.1.5.1.13 | crc64SSDialLineFault | 1 | 1 | This object identifies the status of the last self test diagnostic performed by the unit on the dial line. |
1.3.6.1.4.1.2066.1.5.1.14 | crc64SSAux1Dtr | 1 | 1 | This object identifies AUX 1 DTR Status. |
1.3.6.1.4.1.2066.1.5.1.15 | crc64SSAux2Dtr | 1 | 1 | This object identifies AUX 2 DTR Status. |
1.3.6.1.4.1.2066.1.5.1.16 | crc64SSExternalAlarm | 1 | 1 | This object identifies the status of External Alarm Contact Sense. |
1.3.6.1.4.1.2066.1.5.1.17 | crc64SSNwkLmiErrors | 1 | 1 | This object identifies the current status of the LMI as it applies to the network side of the interface. |
1.3.6.1.4.1.2066.1.5.1.18 | crc64SSUsrLmiErrors | 1 | 1 | This object identifies the current status of the LMI as it applies to the user equipment (DTE) side of the interface. |
1.3.6.1.4.1.2066.1.5.1.19 | crc64SSExcessNwkErrors | 1 | 1 | This object identifies the count of excessive network errors encountered. |
1.3.6.1.4.1.2066.1.5.1.20 | crc64SSExcessUsrErrors | 1 | 1 | This object identifies the User Frame error status. |
1.3.6.1.4.1.2066.1.5.1.21 | crc64SSExcessFecnBecnSec | 1 | 1 | This object identifies the status of excess FECN/BECN secs. |
1.3.6.1.4.1.2066.1.5.1.22 | crc64SSExcessAvgLatency | 1 | 1 | This object identifies the status of excess Average Latency. |
1.3.6.1.4.1.2066.1.5.1.23 | crc64SSExcessPvcPktDrpdThres | 1 | 1 | This object identifies the status of the PVC Dropped Threshold status. |
1.3.6.1.4.1.2066.1.5.1.24 | crc64SSExcessPvcPktDlvdThres | 1 | 1 | This object identifies the status of the PVC Delivered Threshold status. |
1.3.6.1.4.1.2066.1.5.1.26 | crc64SSBaseCardSerialNumber | 1 | 1 | This is the Serial Number of the NetPath 64 Unit. |
1.3.6.1.4.1.2066.1.5.1.27 | crc64SSActiveFlashSwRevision | 1 | 1 | This is the Flash Software Revision. |
1.3.6.1.4.1.2066.1.5.1.28 | crc64SSBootloaderSwRevision | 1 | 1 | This is the Bootloader Software Revision. |
1.3.6.1.4.1.2066.1.5.1.29 | crc64SSNvmStatus | 1 | 1 | This object identifies the NVM write status. |
1.3.6.1.4.1.2066.1.5.1.30 | crc64SSUnitPowerStatus | 1 | 1 | Reading this object returns the status of the AC power being supplied to the unit. |
1.3.6.1.4.1.2066.1.5.1.31 | crc64SSLoginSecurityViolationStatus | 1 | 1 | Reading this object returns the status of whether a login security violation occurred. |