Vendor: Paradyne
Module: CRC-MIB (crcnp100.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
crc100CGFrmMgrConfig OBJECT IDENTIFIER ::= { crc100Config 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2066.2.4.4.1 | crc100FCDlci | 1 | 1 | This object identifies the frame relay WAN DLCI. |
1.3.6.1.4.1.2066.2.4.4.2 | crc100FCLmiProtocol | 1 | 1 | This object identifies the LMI protocol used for the frame relay network. |
1.3.6.1.4.1.2066.2.4.4.3 | crc100FCVcSigUsrT391 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) T391/Status Enq Rate. |
1.3.6.1.4.1.2066.2.4.4.4 | crc100FCVcSigUsrN392 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) N392/Event Error Thres. |
1.3.6.1.4.1.2066.2.4.4.5 | crc100FCVcSigUsrN393 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) N393/Event Count. |
1.3.6.1.4.1.2066.2.4.4.6 | crc100FCVcSigUsrN391 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) N391/Full Status Freq. |
1.3.6.1.4.1.2066.2.4.4.7 | crc100FCVcSigUsrLinkRelErrors | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) Frame Error (Link). |
1.3.6.1.4.1.2066.2.4.4.8 | crc100FCVcSigNwkT392 | 1 | 1 | This object identifies the User Side (acting as DCE to User) T392/Status Enq Timeout. |
1.3.6.1.4.1.2066.2.4.4.9 | crc100FCVcSigNwkN392 | 1 | 1 | This object identifies the User Side (acting as DCE to User) N392/Event Error Thres. |
1.3.6.1.4.1.2066.2.4.4.10 | crc100FCVcSigNwkN393 | 1 | 1 | This object identifies the User Side (acting as DCE to User) N393/Event Count. |
1.3.6.1.4.1.2066.2.4.4.11 | crc100FCVcSigNwkLinkRelErrors | 1 | 1 | This object identifies the User Side (acting as DCE to User) Link Error Thres. |
1.3.6.1.4.1.2066.2.4.4.12 | crc100FCForceFullStatus | 1 | 1 | This object identifies the enable/disable force full status LMI feature. |
1.3.6.1.4.1.2066.2.4.4.13 | crc100FCPayloadCpeFlag | 1 | 1 | This object identifies the payload or CPE management access. |
1.3.6.1.4.1.2066.2.4.4.14 | crc100FCBecnFecnThres | 1 | 1 | This object identifies the BECN/FECN second threshold. |
1.3.6.1.4.1.2066.2.4.4.15 | crc100FCUsrDlci | 1 | 1 | This object identifies the Payload/CPE management DLCI. |
1.3.6.1.4.1.2066.2.4.4.16 | crc100FCTunneledDlciFlag | 1 | 1 | This object identifies whether the tunneled DLCI or WAN management DLCI is entered. If the flag is set to true, tunneled DLCI has… |
1.3.6.1.4.1.2066.2.4.4.17 | crc100FCDynamicIpLearning | 1 | 1 | This object identifies whether the dynamic IP address learning feature is enabled or disabled. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2066.2.4.1 | crc100CGBasicDevConfig | 1 | 2 | None |
1.3.6.1.4.1.2066.2.4.2 | crc100CGDevConfig | 18 | 36 | None |
1.3.6.1.4.1.2066.2.4.3 | crc100CGDs1ExtentConfig | 7 | 14 | None |
1.3.6.1.4.1.2066.2.4.5 | crc100CGTrapConfig | 4 | 14 | None |
1.3.6.1.4.1.2066.2.4.6 | crc100CGPvcPerformConfig | 22 | 52 | None |
1.3.6.1.4.1.2066.2.4.7 | crc100CGProtocolMonitorConfig | 4 | 12 | None |
1.3.6.1.4.1.2066.2.4.8 | crc100CGIsdnCommonConfig | 2 | 7 | None |
1.3.6.1.4.1.2066.2.4.9 | crc100CGIsdnBackupDemandConfig | 3 | 44 | None |
1.3.6.1.4.1.2066.2.4.10 | crc100CGMgmtTunnelingHubConfig | 3 | 9 | None |