This object identifies the percentage of Cir used for
the Tc Bin 2 counter.
Parsed from file crcnp64.mib.txt
Company: paradyne
Module: CRC-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
crc100PCCirBin2 OBJECT-TYPE SYNTAX INTEGER (1..200) ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the percentage of Cir used for the Tc Bin 2 counter." ::= { crc100CGPvcPerformConfig 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2066.2.4.6.11.0 | crc100PCCirBin2 | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2066.2.4.6.1 | crc100PCMonPktsRate | 1 | 1 | This object identifies the desired packet rate in seconds for latency test. |
| 1.3.6.1.4.1.2066.2.4.6.2 | crc100PCMinPktsForDelayAlarm | 1 | 1 | This object identifies the min packets for average delay alarm. |
| 1.3.6.1.4.1.2066.2.4.6.3 | crc100PCDrpdMonPktThres | 1 | 1 | This object identifies the latency test packet lost threshold. |
| 1.3.6.1.4.1.2066.2.4.6.4 | crc100PCDelayThreshold | 1 | 1 | This object identifies the average latency delay threshold. |
| 1.3.6.1.4.1.2066.2.4.6.5 | crc100PCStatsHistoryInterval | 1 | 1 | This object identifies the number of minutes per interval for PVC Statistics. |
| 1.3.6.1.4.1.2066.2.4.6.6 | crc100PCPvcPerfMonTable | 1 | 9 | None |
| 1.3.6.1.4.1.2066.2.4.6.7 | crc100PCFrameLostMonitorRate | 1 | 1 | This object identifies the rate at which frame loss packets are sent in seconds. |
| 1.3.6.1.4.1.2066.2.4.6.8 | crc100PCDlvdPktThres | 1 | 1 | This object identifies the minimum percentage of packets that must be delivered on any monitored PVC in an interval. |
| 1.3.6.1.4.1.2066.2.4.6.9 | crc100PCCirFromLmi | 1 | 1 | This object identifies from where the Cir values should be used. |
| 1.3.6.1.4.1.2066.2.4.6.10 | crc100PCCirBin1 | 1 | 1 | This object identifies the percentage of Cir used for the Tc Bin 1 counter. |
| 1.3.6.1.4.1.2066.2.4.6.12 | crc100PCCirBin3 | 1 | 1 | This object identifies the percentage of Cir used for the Tc Bin 3 counter. |
| 1.3.6.1.4.1.2066.2.4.6.13 | crc100PCCirBin4 | 1 | 1 | This object identifies the percentage of Cir used for the Tc Bin 4 counter. |
| 1.3.6.1.4.1.2066.2.4.6.14 | crc100PCCirBin5 | 1 | 1 | This object identifies the percentage of Cir used for the Tc Bin 5 counter. |
| 1.3.6.1.4.1.2066.2.4.6.15 | crc100PCCirBin6 | 1 | 1 | This object identifies the percentage of Cir used for the Tc Bin 6 counter. |
| 1.3.6.1.4.1.2066.2.4.6.16 | crc100PCAutoTxCir | 1 | 1 | This object identifies the value to be used for the TxCir parameter when a non-configured PVC is detected by the hardware. |
| 1.3.6.1.4.1.2066.2.4.6.17 | crc100PCAutoTxBc | 1 | 1 | This object identifies the value that is used for the TxBc parameter when a non-configured PVC is detected by the hardware. |
| 1.3.6.1.4.1.2066.2.4.6.18 | crc100PCAutoTxBe | 1 | 1 | This object identifies the value that is used for the TxBe parameter when a non-configured PVC is detected by the hardware. |
| 1.3.6.1.4.1.2066.2.4.6.19 | crc100PCAutoRxCir | 1 | 1 | This object identifies the value that is used for the RxCir parameter when a non-configured PVC is detected by the hardware. |
| 1.3.6.1.4.1.2066.2.4.6.20 | crc100PCAutoRxBc | 1 | 1 | This object identifies the value that is used for the RxBc parameter when a non-configured PVC is detected by the hardware. |
| 1.3.6.1.4.1.2066.2.4.6.21 | crc100PCAutoRxBe | 1 | 1 | This object identifies the value that is used for the RxBe parameter when a non-configured PVC is detected by the hardware. |
| 1.3.6.1.4.1.2066.2.4.6.22 | crc100PCAutoMonType | 1 | 1 | This object identifies the value that is used for the MonType parameter when a non-configured PVC is detected by the hardware. |