Reading this object returns the status of the AC power
being supplied to the unit.
Parsed from file crcnp64.mib.txt
Company: paradyne
Module: CRC-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
crc100SSUnitPowerStatus OBJECT-TYPE SYNTAX INTEGER{ ok(1), failed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reading this object returns the status of the AC power being supplied to the unit." ::= { crc100SGSysStatus 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2066.2.5.1.28.0 | crc100SSUnitPowerStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2066.2.5.1.1 | crc100SSDataRate | 1 | 1 | This object identifies the calculated data rate in Kbps. |
| 1.3.6.1.4.1.2066.2.5.1.2 | crc100SSLineFailure | 1 | 1 | This object identifies the network interface line conditions. |
| 1.3.6.1.4.1.2066.2.5.1.3 | crc100SSExcessEsUasErrors | 1 | 1 | This object indicates the status of the ES and UAS threshold. |
| 1.3.6.1.4.1.2066.2.5.1.4 | crc100SSDsuFault | 1 | 1 | This object indicates the status of the unit. |
| 1.3.6.1.4.1.2066.2.5.1.5 | crc100SSLocalInitiatedTest | 1 | 1 | This object identifies which locally initiated test is active. |
| 1.3.6.1.4.1.2066.2.5.1.6 | crc100SSUsrDtr | 1 | 1 | This object identifies DTR status of User Side Interface, which is a High Speed Interface parameter. |
| 1.3.6.1.4.1.2066.2.5.1.7 | crc100SSUsrInterfaceType | 1 | 1 | This object identifies Interface Type of the User Side Interface, which is a High Speed Interface. |
| 1.3.6.1.4.1.2066.2.5.1.8 | crc100SSUsrPower | 1 | 1 | This object identifies Power Status of the User Side Interface, which is a High Speed Interface. |
| 1.3.6.1.4.1.2066.2.5.1.9 | crc100SSUsrRts | 1 | 1 | This object identifies RTS status of the User Side Interface, which is a High Speed Interface. |
| 1.3.6.1.4.1.2066.2.5.1.10 | crc100SSModemFault | 1 | 1 | This object identifies modem self test status. |
| 1.3.6.1.4.1.2066.2.5.1.11 | crc100SSDialLineFault | 1 | 1 | This object identifies dial line test status. |
| 1.3.6.1.4.1.2066.2.5.1.12 | crc100SSAux1Dtr | 1 | 1 | This object identifies AUX 1 DTR Status. |
| 1.3.6.1.4.1.2066.2.5.1.13 | crc100SSAux2Dtr | 1 | 1 | This object identifies AUX 2 DTR Status. |
| 1.3.6.1.4.1.2066.2.5.1.14 | crc100SSExternalAlarm | 1 | 1 | This object identifies the alarm Contact Status. |
| 1.3.6.1.4.1.2066.2.5.1.15 | crc100SSNwkLmiErrors | 1 | 1 | This object identifies Network LMI status. |
| 1.3.6.1.4.1.2066.2.5.1.16 | crc100SSUsrLmiErrors | 1 | 1 | This object identifies the user LMI status. |
| 1.3.6.1.4.1.2066.2.5.1.17 | crc100SSExcessNwkErrors | 1 | 1 | This object identifies the network Frame error status. |
| 1.3.6.1.4.1.2066.2.5.1.18 | crc100SSExcessUsrErrors | 1 | 1 | This object identifies the User Frame error status. |
| 1.3.6.1.4.1.2066.2.5.1.19 | crc100SSExcessFecnBecnSec | 1 | 1 | This object identifies the status of excess FECN/BECN secs. |
| 1.3.6.1.4.1.2066.2.5.1.20 | crc100SSExcessAvgLatency | 1 | 1 | This object identifies the status of excess Average Latency. |
| 1.3.6.1.4.1.2066.2.5.1.21 | crc100SSSwRevision | 1 | 1 | This is the Software Revision of the operational code. |
| 1.3.6.1.4.1.2066.2.5.1.22 | crc100SSSerialNumber | 1 | 1 | This is the Serial Number of the Unit. |
| 1.3.6.1.4.1.2066.2.5.1.23 | crc100SSExcessPvcPktDrpdThres | 1 | 1 | This object identifies the status of the PVC Dropped Threshold status. |
| 1.3.6.1.4.1.2066.2.5.1.24 | crc100SSExcessPvcPktDlvdThres | 1 | 1 | This object identifies the status of the PVC Delivered Threshold status. |
| 1.3.6.1.4.1.2066.2.5.1.25 | crc100SSRemoteInitiatedTest | 1 | 1 | This object identifies which remotely initiated test is active |
| 1.3.6.1.4.1.2066.2.5.1.26 | crc100SSBootloaderSwRevision | 1 | 1 | This is the Bootloader Software Revision. |
| 1.3.6.1.4.1.2066.2.5.1.27 | crc100SSNvmStatus | 1 | 1 | This object identifies the NVM write status. |
| 1.3.6.1.4.1.2066.2.5.1.29 | crc100SSLoginSecurityViolationStatus | 1 | 1 | Reading this object returns the last access path where a login security violation occurred. |