Vendor: Paradyne
Module: CRC-MIB (crcnp110.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
crc110CGFrmMgrConfig OBJECT IDENTIFIER ::= { crc110Config 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2066.3.4.4.1 | crc110FCDlci | 1 | 1 | This object identifies the frame relay WAN DLCI. |
1.3.6.1.4.1.2066.3.4.4.2 | crc110FCLmiProtocol | 1 | 1 | This object identifies the LMI protocol used for the frame relay network. |
1.3.6.1.4.1.2066.3.4.4.3 | crc110FCVcSigUsrT391 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) T391/Status Enq Rate. |
1.3.6.1.4.1.2066.3.4.4.4 | crc110FCVcSigUsrN392 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) N392/Event Error Thres. |
1.3.6.1.4.1.2066.3.4.4.5 | crc110FCVcSigUsrN393 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) N393/Event Count. |
1.3.6.1.4.1.2066.3.4.4.6 | crc110FCVcSigUsrN391 | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) N391/Full Status Freq. |
1.3.6.1.4.1.2066.3.4.4.7 | crc110FCVcSigUsrLinkRelErrors | 1 | 1 | This object identifies the Network Side (acting as DTE to Network) Frame Error (Link). |
1.3.6.1.4.1.2066.3.4.4.8 | crc110FCVcSigNwkT392 | 1 | 1 | This object identifies the User Side (acting as DCE to User) T392/Status Enq Timeout. |
1.3.6.1.4.1.2066.3.4.4.9 | crc110FCVcSigNwkN392 | 1 | 1 | This object identifies the User Side (acting as DCE to User) N392/Event Error Thres. |
1.3.6.1.4.1.2066.3.4.4.10 | crc110FCVcSigNwkN393 | 1 | 1 | This object identifies the User Side (acting as DCE to User) N393/Event Count. |
1.3.6.1.4.1.2066.3.4.4.11 | crc110FCVcSigNwkLinkRelErrors | 1 | 1 | This object identifies the User Side (acting as DCE to User) Link Error Thres. |
1.3.6.1.4.1.2066.3.4.4.12 | crc110FCForceFullStatus | 1 | 1 | This object identifies the enable/disable force full status LMI feature. |
1.3.6.1.4.1.2066.3.4.4.13 | crc110FCPayloadCpeFlag | 1 | 1 | This object identifies the payload or CPE management access. |
1.3.6.1.4.1.2066.3.4.4.14 | crc110FCBecnFecnThres | 1 | 1 | This object identifies the BECN/FECN second threshold. |
1.3.6.1.4.1.2066.3.4.4.15 | crc110FCUsrDlci | 1 | 1 | This object identifies the Payload/CPE management DLCI. |
1.3.6.1.4.1.2066.3.4.4.16 | crc110FCTunneledDlciFlag | 1 | 1 | This object identifies whether the tunneled DLCI or WAN management DLCI is entered. If the flag is set to true, tunneled DLCI has… |
1.3.6.1.4.1.2066.3.4.4.17 | crc110FCDynamicIpLearning | 1 | 1 | This object identifies whether the dynamic IP address learning feature is enabled or disabled. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2066.3.4.1 | crc110CGBasicDevConfig | 1 | 2 | None |
1.3.6.1.4.1.2066.3.4.2 | crc110CGDevConfig | 18 | 36 | None |
1.3.6.1.4.1.2066.3.4.3 | crc110CGDs1ExtentConfig | 15 | 32 | None |
1.3.6.1.4.1.2066.3.4.5 | crc110CGTrapConfig | 4 | 14 | None |
1.3.6.1.4.1.2066.3.4.6 | crc110CGPvcPerformConfig | 22 | 52 | None |
1.3.6.1.4.1.2066.3.4.7 | crc110CGProtocolMonitorConfig | 4 | 12 | None |
1.3.6.1.4.1.2066.3.4.8 | crc110CGIsdnCommonConfig | 2 | 7 | None |
1.3.6.1.4.1.2066.3.4.9 | crc110CGIsdnBackupDemandConfig | 3 | 44 | None |
1.3.6.1.4.1.2066.3.4.10 | crc110CGMgmtTunnelingHubConfig | 3 | 9 | None |