A sequence number used to indicate that TL1 interface
provisioning table has been modified and it needs to be
re-read. Whenever the SNMP agent is restarted, this value will
be reset to 0(zero). The value will be incremented by one
whenever a change to the TL1 interface provisioning table
is made. This number will also be sent in the
umc1TrapTL1IfProvTableChange trap and can be used to
determine if any traps have been lost. This value will be
incremented before the trap is sent.
The maximum value it can assume is 2,147,483,647. An increment,
every time it has reached its maximum value, shall cause it to
be reset to 1.
Parsed from file umc1000.mib.txt
Company: None
Module: UMC1000-MIB
A sequence number used to indicate that TL1 interface
provisioning table has been modified and it needs to be
re-read. Whenever the SNMP agent is restarted, this value will
be reset to 0(zero). The value will be incremented by one
whenever a change to the TL1 interface provisioning table
is made. This number will also be sent in the
umc1TrapTL1IfProvTableChange trap and can be used to
determine if any traps have been lost. This value will be
incremented before the trap is sent.
The maximum value it can assume is 2,147,483,647. An increment,
every time it has reached its maximum value, shall cause it to
be reset to 1.
Parsed from file UMC1000-MIB.mib
Module: UMC1000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
umc1TL1IfProvTableChangeSeqNum OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number used to indicate that TL1 interface provisioning table has been modified and it needs to be re-read. Whenever the SNMP agent is restarted, this value will be reset to 0(zero). The value will be incremented by one whenever a change to the TL1 interface provisioning table is made. This number will also be sent in the umc1TrapTL1IfProvTableChange trap and can be used to determine if any traps have been lost. This value will be incremented before the trap is sent. The maximum value it can assume is 2,147,483,647. An increment, every time it has reached its maximum value, shall cause it to be reset to 1. " ::= { umc1SystemPitProv 8 }
umc1TL1IfProvTableChangeSeqNum OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number used to indicate that TL1 interface provisioning table has been modified and it needs to be re-read. Whenever the SNMP agent is restarted, this value will be reset to 0(zero). The value will be incremented by one whenever a change to the TL1 interface provisioning table is made. This number will also be sent in the umc1TrapTL1IfProvTableChange trap and can be used to determine if any traps have been lost. This value will be incremented before the trap is sent. The maximum value it can assume is 2,147,483,647. An increment, every time it has reached its maximum value, shall cause it to be reset to 1. " ::= { umc1SystemPitProv 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1.3.8.0 | umc1TL1IfProvTableChangeSeqNum | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1.3.1 | umc1SystemPitProvTable | 1 | 6 | A Management Station uses this table to GET and SET a *single* Plug-in Provisioning record. Access to this table is read-write. … |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2 | umc1SystemDefPitProvTable | 1 | 6 | A Management Station uses this table to read a *single* Default Plug-in Provisioning record. Access to this table is read-only. B… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.3 | umc1SystemPitProvChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of the Plug-In Provisioning data with that managed by the UMC… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.4 | umc1SystemPitProvTableChangeSeqNum | 1 | 1 | A sequence number used to indicate that the PlugIn Provisioning Table, umc1SystemPitProvTable, has been modified and it needs to… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.5 | umc1FacAlmStringTableChangeSeqNum | 1 | 1 | A sequence number used to indicate that facility alarm description string table has been modified and it needs to be re-read. Whe… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6 | umc1FacAlmStringTable | 1 | 7 | This table contains facility alarm description strings for a given plugin in a UMC system. SNMP GET-NEXT operation is not allowed. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.7 | umc1FacAlmStringChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of the facility alarm description strings with that managed by… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9 | umc1TL1IfProvTable | 1 | 7 | This table contains TL1 interface provisioning for a given OSI card in a UMC system. SNMP GET-NEXT operation is not allowed. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.10 | umc1TL1IfProvChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of the TL1 interface provisioning with that managed by the UMC… |