This object identifies a command that a manager may execute in an agent.
The following table describes the supported commands and their
corresponding values.
Value Command Type Description
1 _ReadTable_ Read the Table Type specified by the umc1CommandArg
2 _GetAllSeqNbr_ Read All Sequence Numbers
3 _GetActiveTermName_ Read the terminal name of all active terminals
4 _GetCpuDbDumpPort_ Read the port for Cpu Db Dump
5 _SetOrDelete_ Set or Delete the MIB Object specified by umc1CommandArg
6 _ClearCache_ Clear IPMI Agent Cache
7 _RebootIpmi_ Reboot IPMI Card
8 _ActivateAco_ Activate ACO
9 _AotRollover_ AoT to End-To-End Rollover
10 _CurTrafficStats_ Get the Current Traffic Status
11 _GetVcStatusInfo_ Get Virtual Circuit Status Information
12 _GetLineCardStatus_ Get Status Information for Digital Line Card(ADSL's)
13 _GetBlockedVccInfo_ Get Information on blocked VCCs
14 _GetAtmBandwidth_ Get ATM Bandwidth for Uplink circuit
15 _GetAtmStatistics_ Get ATM Statistics
16 _GetAdslBitsPerTone_ Get Bits Per Tone Data for ADSL Line
17 _GetAdslPmAttribute_ Get / Clear ADSL Perfomance Measurement data by attribute
18 _GetPmDataBin_ Get / Clear ADSL or ATM Perfomance Measurement data by bin
19 _GetNBLinkStats_ Get Narrow Band Link Traffic Statistics
20 _DeleteEquipment_ Delete Provisioning and cross-connects for a slot
21 _SoftwareActivation_ Manual Software Activation
22 _ManualProtectionSwitch_ Manual Protection Switch
23 _GetAPSInfo_ Get APS Info
24 _GenericIB_ Generic Get / Set command utilizing IB message types
25 _GetAtmStatsPerVcc_ Get ATM statistic per Vcc
26 _GetDropTestResults_ Get MTU Drop Test results
Parsed from file umc1000.mib.txt
Company: None
Module: UMC1000-MIB
This object identifies a command that a manager may execute in an agent.
The following table describes the supported commands and their
corresponding values.
Value Command Type Description
1 _ReadTable_ Read the Table Type specified by the umc1CommandArg
2 _GetAllSeqNbr_ Read All Sequence Numbers
3 _GetActiveTermName_ Read the terminal name of all active terminals
4 _GetCpuDbDumpPort_ Read the port for Cpu Db Dump
5 _SetOrDelete_ Set or Delete the MIB Object specified by umc1CommandArg
6 _ClearCache_ Clear IPMI Agent Cache
7 _RebootIpmi_ Reboot IPMI Card
8 _ActivateAco_ Activate ACO
9 _AotRollover_ AoT to End-To-End Rollover
10 _CurTrafficStats_ Get the Current Traffic Status
11 _GetVcStatusInfo_ Get Virtual Circuit Status Information
12 _GetLineCardStatus_ Get Status Information for Digital Line Card(ADSL's)
13 _GetBlockedVccInfo_ Get Information on blocked VCCs
14 _GetAtmBandwidth_ Get ATM Bandwidth for Uplink circuit
15 _GetAtmStatistics_ Get ATM Statistics
16 _GetAdslBitsPerTone_ Get Bits Per Tone Data for ADSL Line
17 _GetAdslPmAttribute_ Get / Clear ADSL Perfomance Measurement data by attribute
18 _GetPmDataBin_ Get / Clear ADSL or ATM Perfomance Measurement data by bin
19 _GetNBLinkStats_ Get Narrow Band Link Traffic Statistics
20 _DeleteEquipment_ Delete Provisioning and cross-connects for a slot
21 _SoftwareActivation_ Manual Software Activation
22 _ManualProtectionSwitch_ Manual Protection Switch
23 _GetAPSInfo_ Get APS Info
24 _GenericIB_ Generic Get / Set command utilizing IB message types
25 _GetAtmStatsPerVcc_ Get ATM statistic per Vcc
26 _GetDropTestResults_ Get MTU Drop Test results
Parsed from file UMC1000-MIB.mib
Module: UMC1000-MIB
Vendor: Advanced Fibre Communications
Module: AFC-OIDS (umc.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
umc1CommandId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies a command that a manager may execute in an agent. The following table describes the supported commands and their corresponding values. Value Command Type Description 1 _ReadTable_ Read the Table Type specified by the umc1CommandArg 2 _GetAllSeqNbr_ Read All Sequence Numbers 3 _GetActiveTermName_ Read the terminal name of all active terminals 4 _GetCpuDbDumpPort_ Read the port for Cpu Db Dump 5 _SetOrDelete_ Set or Delete the MIB Object specified by umc1CommandArg 6 _ClearCache_ Clear IPMI Agent Cache 7 _RebootIpmi_ Reboot IPMI Card 8 _ActivateAco_ Activate ACO 9 _AotRollover_ AoT to End-To-End Rollover 10 _CurTrafficStats_ Get the Current Traffic Status 11 _GetVcStatusInfo_ Get Virtual Circuit Status Information 12 _GetLineCardStatus_ Get Status Information for Digital Line Card(ADSL's) 13 _GetBlockedVccInfo_ Get Information on blocked VCCs 14 _GetAtmBandwidth_ Get ATM Bandwidth for Uplink circuit 15 _GetAtmStatistics_ Get ATM Statistics 16 _GetAdslBitsPerTone_ Get Bits Per Tone Data for ADSL Line 17 _GetAdslPmAttribute_ Get / Clear ADSL Perfomance Measurement data by attribute 18 _GetPmDataBin_ Get / Clear ADSL or ATM Perfomance Measurement data by bin 19 _GetNBLinkStats_ Get Narrow Band Link Traffic Statistics 20 _DeleteEquipment_ Delete Provisioning and cross-connects for a slot 21 _SoftwareActivation_ Manual Software Activation 22 _ManualProtectionSwitch_ Manual Protection Switch 23 _GetAPSInfo_ Get APS Info 24 _GenericIB_ Generic Get / Set command utilizing IB message types 25 _GetAtmStatsPerVcc_ Get ATM statistic per Vcc 26 _GetDropTestResults_ Get MTU Drop Test results " ::= { umc1CommandTableEntry 1 }
umc1CommandId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies a command that a manager may execute in an agent. The following table describes the supported commands and their corresponding values. Value Command Type Description 1 _ReadTable_ Read the Table Type specified by the umc1CommandArg 2 _GetAllSeqNbr_ Read All Sequence Numbers 3 _GetActiveTermName_ Read the terminal name of all active terminals 4 _GetCpuDbDumpPort_ Read the port for Cpu Db Dump 5 _SetOrDelete_ Set or Delete the MIB Object specified by umc1CommandArg 6 _ClearCache_ Clear IPMI Agent Cache 7 _RebootIpmi_ Reboot IPMI Card 8 _ActivateAco_ Activate ACO 9 _AotRollover_ AoT to End-To-End Rollover 10 _CurTrafficStats_ Get the Current Traffic Status 11 _GetVcStatusInfo_ Get Virtual Circuit Status Information 12 _GetLineCardStatus_ Get Status Information for Digital Line Card(ADSL's) 13 _GetBlockedVccInfo_ Get Information on blocked VCCs 14 _GetAtmBandwidth_ Get ATM Bandwidth for Uplink circuit 15 _GetAtmStatistics_ Get ATM Statistics 16 _GetAdslBitsPerTone_ Get Bits Per Tone Data for ADSL Line 17 _GetAdslPmAttribute_ Get / Clear ADSL Perfomance Measurement data by attribute 18 _GetPmDataBin_ Get / Clear ADSL or ATM Perfomance Measurement data by bin 19 _GetNBLinkStats_ Get Narrow Band Link Traffic Statistics 20 _DeleteEquipment_ Delete Provisioning and cross-connects for a slot 21 _SoftwareActivation_ Manual Software Activation 22 _ManualProtectionSwitch_ Manual Protection Switch 23 _GetAPSInfo_ Get APS Info 24 _GenericIB_ Generic Get / Set command utilizing IB message types 25 _GetAtmStatsPerVcc_ Get ATM statistic per Vcc 26 _GetDropTestResults_ Get MTU Drop Test results " ::= { umc1CommandTableEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2067.1.1.2.5.1.1.2 | umc1CommandArg | 0 | 0 | This object specifies the argument to a command. The format of this object is: octet[0] contains command argument. octet[1] co… |
1.3.6.1.4.1.2067.1.1.2.5.1.1.3 | umc1CommandTransNbr | 0 | 0 | In order to execute a command, a Management Application must first initiate a Get request to read the transaction number for a g… |