atiswitchPortCOSPriorityConfig OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This per-port attribute allows the configuration of the
priority of the port. There are 8 priorities as per the
IEEE standard with 0 being the lowest priority and 7 the
highest. In a switch environment, ports with higher
priority has it\s to and from traffic given higher
priority when compared with those with lower priority."
View at oid-info.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.207.8.15.3.1.1.2 | atiswitchPortName | 0 | 0 | atiswitchPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribu… |
1.3.6.1.4.1.207.8.15.3.1.1.3 | atiswitchPortAutosenseOrHalfDuplex | 0 | 0 | atiswitchPortAutosenseOrHalfDuplex OBJECT-TYPE SYNTAX INTEGER { portAutoSense(1), forceHalfDuplex-10M(2), forceHalfDuplex-100M(… |
1.3.6.1.4.1.207.8.15.3.1.1.4 | atiswitchPortLinkState | 0 | 0 | atiswitchPortLinkState OBJECT-TYPE SYNTAX INTEGER { online (1), offline (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "… |
1.3.6.1.4.1.207.8.15.3.1.1.5 | atiswitchPortDuplexStatus | 0 | 0 | atiswitchPortDuplexStatus OBJECT-TYPE SYNTAX INTEGER { fullDuplex(1), halfDuplex(2), autosense(3) } MAX-ACCESS read-only STATUS… |
1.3.6.1.4.1.207.8.15.3.1.1.6 | atiswitchPortSpeed | 0 | 0 | atiswitchPortSpeed OBJECT-TYPE SYNTAX INTEGER { tenMBits (1), hundredMBits (2), gigaBits (3), unknown (4) } MAX-ACCESS read-onl… |
1.3.6.1.4.1.207.8.15.3.1.1.7 | atiswitchPortState | 0 | 0 | atiswitchPortState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2), blocking (3), listening (4), learning (5), unknown(6… |
1.3.6.1.4.1.207.8.15.3.1.1.8 | atiswitchPortFlowControlConfig | 0 | 0 | atiswitchPortFlowControlConfig OBJECT-TYPE SYNTAX INTEGER { disable(1), transmit-only(2), receive-only(3), transmit-and-receive… |
1.3.6.1.4.1.207.8.15.3.1.1.9 | atiswitchPortBackPressureConfig | 0 | 0 | atiswitchPortBackPressureConfig OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), unknown(3) } MAX-ACCESS read-write STATUS c… |
1.3.6.1.4.1.207.8.15.3.1.1.10 | atiswitchPortVlanTagPriorityConfig | 0 | 0 | atiswitchPortVlanTagPriorityConfig OBJECT-TYPE SYNTAX INTEGER { use-vlan-priority(1), override-vlan-priority(2) } MAX-ACCESS re… |
1.3.6.1.4.1.207.8.15.3.1.1.12 | atiswitchPortBroadcastConfig | 0 | 0 | atiswitchPortBroadcastConfig OBJECT-TYPE SYNTAX INTEGER { discard-broadcasts(1), do-not-discard-broadcasts(2) } MAX-ACCESS read… |
1.3.6.1.4.1.207.8.15.3.1.1.13 | atiswitchPortReset | 0 | 0 | atiswitchPortReset OBJECT-TYPE SYNTAX INTEGER { reset(1), no-reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This … |