ts-xxxx
0 : red
off(0),red(1)
1 : green
off(0),green(2)
cs-xxxx
0 : fault
off(0),red(1)
1 : master
off(0),green(2)
2 : test1
off(0),yellow(4)
3 : test2
off(0),yellow(4)
4 : test3
off(0),yellow(4)
5 : test4
off(0),yellow(4)
6 : rx/tx
off(0),green(2)
se-xxxx
0 : fault
off(0),red(1)
1 : power
off(0),green(2)
2 : status1
off(0),red(1),green(2),yellow(4)
3 : status2
off(0),red(1),green(2),yellow(4)
4 : status3
off(0),red(1),green(2),yellow(4)
5 : status4
off(0),red(1),green(2),yellow(4)
6 : status5
off(0),red(1),green(2),yellow(4)
Note. Lower 3 bits indicates off/color (off(0),red(1),
green(2),yellow(4)), Higher 5 bits reserved for
flash frequency.
Parsed from file SCA_BOX.MIB.txt
Company: None
Module: SCA-BOX-MIB
ts-xxxx
0 : red
off(0),red(1)
1 : green
off(0),green(2)
cs-xxxx
0 : fault
off(0),red(1)
1 : master
off(0),green(2)
2 : test1
off(0),yellow(4)
3 : test2
off(0),yellow(4)
4 : test3
off(0),yellow(4)
5 : test4
off(0),yellow(4)
6 : rx/tx
off(0),green(2)
se-xxxx
0 : fault
off(0),red(1)
1 : power
off(0),green(2)
2 : status1
off(0),red(1),green(2),yellow(4)
3 : status2
off(0),red(1),green(2),yellow(4)
4 : status3
off(0),red(1),green(2),yellow(4)
5 : status4
off(0),red(1),green(2),yellow(4)
6 : status5
off(0),red(1),green(2),yellow(4)
Note. Lower 3 bits indicates off/color (off(0),red(1),
green(2),yellow(4)), Higher 5 bits reserved for
flash frequency.
Parsed from file SCA-BOX-MIB.mib
Module: SCA-BOX-MIB
led OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "ts-xxxx 0 : red off(0),red(1) 1 : green off(0),green(2) cs-xxxx 0 : fault off(0),red(1) 1 : master off(0),green(2) 2 : test1 off(0),yellow(4) 3 : test2 off(0),yellow(4) 4 : test3 off(0),yellow(4) 5 : test4 off(0),yellow(4) 6 : rx/tx off(0),green(2) se-xxxx 0 : fault off(0),red(1) 1 : power off(0),green(2) 2 : status1 off(0),red(1),green(2),yellow(4) 3 : status2 off(0),red(1),green(2),yellow(4) 4 : status3 off(0),red(1),green(2),yellow(4) 5 : status4 off(0),red(1),green(2),yellow(4) 6 : status5 off(0),red(1),green(2),yellow(4) Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency." ::= { enclosure 1 }
Vendor: Cray Communications A/S
Module: SCA-BOX-MIB
[Automatically extracted from oidview.com]
led OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "ts-xxxx 0 : red off(0),red(1) 1 : green off(0),green(2) cs-xxxx 0 : fault off(0),red(1) 1 : master off(0),green(2) 2 : test1 off(0),yellow(4) 3 : test2 off(0),yellow(4) 4 : test3 off(0),yellow(4) 5 : test4 off(0),yellow(4) 6 : rx/tx off(0),green(2) se-xxxx 0 : fault off(0),red(1) 1 : power off(0),green(2) 2 : status1 off(0),red(1),green(2),yellow(4) 3 : status2 off(0),red(1),green(2),yellow(4) 4 : status3 off(0),red(1),green(2),yellow(4) 5 : status4 off(0),red(1),green(2),yellow(4) 6 : status5 off(0),red(1),green(2),yellow(4) Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency." ::= { enclosure 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.208.3.1.1.0 | led | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.208.3.1.2 | fan | 1 | 1 | If this object returns 1 then a Fan has failed. |
1.3.6.1.4.1.208.3.1.3 | power | 1 | 1 | If this object returns a non-zero value then one or more power supplies have failed. |
1.3.6.1.4.1.208.3.1.4 | slots | 1 | 1 | The number of slots in the enclosure. |
1.3.6.1.4.1.208.3.1.5 | slotmap | 1 | 1 | A bitmap of the slots in which a card is present. Setting bit0 to 1 indicates that a card is present in slot 1, and so on. |
1.3.6.1.4.1.208.3.1.6 | temperature | 1 | 1 | If this object returns 1 then a temperature sensor has detected an excessive temperature in the enclosure. |
1.3.6.1.4.1.208.3.1.7 | fanNo | 1 | 1 | Total number of fans supported. |
1.3.6.1.4.1.208.3.1.8 | powerNo | 1 | 1 | Total number of power supplies supported. |
1.3.6.1.4.1.208.3.1.9 | temperatureNo | 1 | 1 | A return value of 1 indicates that temperature sensors are supported in the enclosure. |
1.3.6.1.4.1.208.3.1.10 | fanPresent | 1 | 1 | A bitmask of the fans that are present. Bit0 refers to fan 1, bit 1 to fan 2, etc. |
1.3.6.1.4.1.208.3.1.11 | powerPresent | 1 | 1 | A bitmask of the power supples that are present. Bit0 refers to power supply 1, bit 1 to power supply 2, etc. |
1.3.6.1.4.1.208.3.1.12 | temperaturePresent | 1 | 1 | A return value of 1 indicates that temperature sensors are present in the enclosure. |
1.3.6.1.4.1.208.3.1.13 | psuFail | 1 | 1 | This object returns a non-zero value in a trap according to the power supply number when a power supply have failed. |
1.3.6.1.4.1.208.3.1.14 | slotmapFail | 1 | 1 | This object returns a non-zero value in a trap according to the slot number when a card is enabled or disabled in the system cent… |