Indicates whether the filter matches all protocols, a user
defined protocol or a known protocol.
Parsed from file SCA_IPRT.MIB.txt
Company: None
Module: SCA-IPROUTER-MIB
Indicates whether the filter matches all protocols, a user
defined protocol or a known protocol.
Parsed from file SCA-IPROUTER-MIB.mib
Module: SCA-IPROUTER-MIB
filterProtocol OBJECT-TYPE SYNTAX INTEGER { all (1), other (2), icmp (3), tcp (4), udp (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the filter matches all protocols, a user defined protocol or a known protocol." ::= { filterEntry 6 }
Vendor: Cray Communications A/S
Module: SCA-IPROUTER-MIB
[Automatically extracted from oidview.com]
filterProtocol OBJECT-TYPE SYNTAX INTEGER { all (1), other (2), icmp (3), tcp (4), udp (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the filter matches all protocols, a user defined protocol or a known protocol." ::= { filterEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.208.42.1.2.1.1 | filterIfIndex | 0 | 0 | The ifIndex of the IP link on which the filter is used. |
| 1.3.6.1.4.1.208.42.1.2.1.2 | filterDirIndex | 0 | 0 | Indicates whether the filter is an Rx or Tx filter. |
| 1.3.6.1.4.1.208.42.1.2.1.3 | filterIndex | 0 | 0 | Index in the Rx or Tx filter list for the link. |
| 1.3.6.1.4.1.208.42.1.2.1.4 | filterAction | 0 | 0 | The action to be taken when a packet matches the filter. Disabled filters are ignored. |
| 1.3.6.1.4.1.208.42.1.2.1.5 | filterLogging | 0 | 0 | Indicates whether packets matching the filter must be logged. |
| 1.3.6.1.4.1.208.42.1.2.1.7 | filterProtocolValue | 0 | 0 | The protocol field in the IP header of the packet. |
| 1.3.6.1.4.1.208.42.1.2.1.8 | filterTcpFlags | 0 | 0 | Indicates whether the filter matches all TCP packets or only TCP packets with the ACK flag set. When the ACK flag is set, the pac… |
| 1.3.6.1.4.1.208.42.1.2.1.9 | filterSrcAddrType | 0 | 0 | Indicates whether the filter matches all source addresses, addresses on a specific network or a specific host address. |
| 1.3.6.1.4.1.208.42.1.2.1.10 | filterSrcAddr | 0 | 0 | Indicates the network or host address which the source address must match. |
| 1.3.6.1.4.1.208.42.1.2.1.11 | filterSrcMask | 0 | 0 | The subnet mask of the network which the source address must match. |
| 1.3.6.1.4.1.208.42.1.2.1.12 | filterSrcPort | 0 | 0 | Indicates whether the filter matches all or a specific UDP/TCP source port. |
| 1.3.6.1.4.1.208.42.1.2.1.13 | filterSrcPortValue | 0 | 0 | The UDP/TCP source port of the filter. |
| 1.3.6.1.4.1.208.42.1.2.1.14 | filterSrcPortOper | 0 | 0 | The source port operator indicates whether UDP/TCP source port values equal to, not equal to, greater than or less than the filte… |
| 1.3.6.1.4.1.208.42.1.2.1.15 | filterDestAddrType | 0 | 0 | Indicates whether the filter matches all destination addresses, addresses on a specific network or a specific host address. |
| 1.3.6.1.4.1.208.42.1.2.1.16 | filterDestAddr | 0 | 0 | Indicates the network or host address which the destination address must match. |
| 1.3.6.1.4.1.208.42.1.2.1.17 | filterDestMask | 0 | 0 | The subnet mask of the network which the destination address must match. |
| 1.3.6.1.4.1.208.42.1.2.1.18 | filterDestPort | 0 | 0 | Indicates whether the filter matches all or a specific UDP/TCP destination port. |
| 1.3.6.1.4.1.208.42.1.2.1.19 | filterDestPortValue | 0 | 0 | The UDP/TCP destination port of the filter. |
| 1.3.6.1.4.1.208.42.1.2.1.20 | filterDestPortOper | 0 | 0 | The destination port operator indicates whether UDP/TCP destination port values equal to, not equal to, greater than or less than… |
| 1.3.6.1.4.1.208.42.1.2.1.21 | filterHits | 0 | 0 | The number of packets matching the filter. |