Entry of information concerning a single
port on Tmu and the attached station/Tau.
Parsed from file fibr_FR9230.mib.txt
Company: None
Module: TMU-MIB
Entry of information concerning a single
port on Tmu and the attached station/Tau.
Parsed from file TMU-MIB.mib
Module: TMU-MIB
Vendor: Fibronics
Module: TMU-MIB
[Automatically extracted from oidview.com]
fibTmuPortsTauEntry OBJECT-TYPE SYNTAX FibTmuPortsTauEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of information concerning a single port on Tmu and the attached station/Tau." INDEX { fibTmuPortsTmuPort } ::= { fibTmuPortsTauTable 1 }
fibTmuPortsTauEntry OBJECT-TYPE SYNTAX FibTmuPortsTauEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of information concerning a single port on Tmu and the attached station/Tau." INDEX { fibTmuPortsTmuPort } ::= { fibTmuPortsTauTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.60.5.29.1.1 | fibTmuPortsTmuPort | 0 | 0 | Number of port (on TMU) described in this array entry. Port numbers increase in the direction of the token. |
1.3.6.1.4.1.22.60.5.29.1.2 | fibTmuPortsPortType | 0 | 0 | Flag indicating whether this port supports both a Tau and a single station or just a single station. |
1.3.6.1.4.1.22.60.5.29.1.3 | fibTmuPortsEndConnection | 0 | 0 | Flag indicating whether this port is connected to a Tau or to a single station (or is in a state where it is not clear exactly wha… |
1.3.6.1.4.1.22.60.5.29.1.4 | fibTmuPortsPortStatus | 0 | 0 | Bit map indicating status of the port: Bit3 (0x08) - If set indicates that the relay of this port is open (and, therefore, the sta… |
1.3.6.1.4.1.22.60.5.29.1.5 | fibTmuPortsManagerCloseRun | 0 | 0 | When setting this object to the value of close (2) the indicated port on Tmu will be closed, the related led will start blinking … |
1.3.6.1.4.1.22.60.5.29.1.6 | fibTmuPortsManagerClosePerm | 0 | 0 | When setting this object to the value of close (2) the indicated port on Tmu will be closed after the next system reset. see 'fib… |
1.3.6.1.4.1.22.60.5.29.1.10 | fibTmuPortsNumConsequentErrs | 0 | 0 | Counter. Number of times an error has been detected on this Tau port (one after the other, without a 'no error' state in between) … |
1.3.6.1.4.1.22.60.5.29.1.11 | fibTmuPortsNumTimeout | 0 | 0 | Number of times communication with Tau has been attempted immediately after pahntom has gone up. Attempt go on for MaxFirstTimeout… |
1.3.6.1.4.1.22.60.5.29.1.12 | fibTmuPortsTauPortState | 0 | 0 | This is a status byte. it indicates the state of the port as far as software is concerned. A port which may only carry a single st… |
1.3.6.1.4.1.22.60.5.29.1.13 | fibTmuPortsNumPorts | 0 | 0 | The number of ports on the Tau connected to this port. Set to '1' when a station is directly connected to this port. Only meaningf… |
1.3.6.1.4.1.22.60.5.29.1.14 | fibTmuPortsNumAttached | 0 | 0 | This is the number of ports on the connected Tau (if there is any) that have their relay open (station is attached to the ring). … |
1.3.6.1.4.1.22.60.5.29.1.15 | fibTmuPortsNumPhantomUp | 0 | 0 | This is the number of ports on the connected Tau (if there is any) that have their phantom in 'up' state. Only meaningful when 'fi… |
1.3.6.1.4.1.22.60.5.29.1.16 | fibTmuPortsTauRevision | 0 | 0 | This is the Tau revision as reported by the Tau itself (if there is one). Only meaningful when 'fibTmuPortsTauPortState' is 'activ… |
1.3.6.1.4.1.22.60.5.29.1.17 | fibTmuPortsModuleId | 0 | 0 | This is a hw id attached to each of its modules by the Tau. each octet is related to one module (up to 4 modules). Number of meani… |
1.3.6.1.4.1.22.60.5.29.1.18 | fibTmuPortsNumModules | 0 | 0 | This is the number of modules on the attached Tau as reported by the Tau itself. Only meaningful when 'fibTmuPortsTauPortState' is… |
1.3.6.1.4.1.22.60.5.29.1.19 | fibTmuPortsTauMode | 0 | 0 | This is a bit map of information on the status of the Tau and the way it is set. Details of the various bits: Bit0 (= 0x01) If '1'… |
1.3.6.1.4.1.22.60.5.29.1.20 | fibTmuPortsLedState | 0 | 0 | State of the indication led related to this port. Values can be: slow-rate (1) fast-rate (2) fixed-on (3) fixed-off (4) |
1.3.6.1.4.1.22.60.5.29.1.21 | fibTmuPortsRequestType | 0 | 0 | This is the type of the message sent to the attached Tau for which a response is required. If request-type is 'no-Tau-msg' then no… |
1.3.6.1.4.1.22.60.5.29.1.22 | fibTmuPortsLastTxTime | 0 | 0 | This is the system timer value at the last tx-to-Tau on this Tau port (provided a Tau is attached to it). |
1.3.6.1.4.1.22.60.5.29.1.23 | fibTmuPortsLastPollTime | 0 | 0 | This is the system timer value at the last poll response on this Tau port (provided a Tau is attached to it). If no polling has so… |
1.3.6.1.4.1.22.60.5.29.1.24 | fibTmuPortsUpdateTime | 0 | 0 | This is the system timer value when phantom was last probed on this Tau port. |
1.3.6.1.4.1.22.60.5.29.1.25 | fibTmuPortsAllowedAddr | 0 | 0 | This is the one physical address allowed to be on this Tmu port (provided a single station is attached to it and not a Tau). The v… |
1.3.6.1.4.1.22.60.5.29.1.26 | fibTmuPortsAllowedAddrLoaded | 0 | 0 | This is the status of fibTmuPortsAllowedAddr. When reading, the possible values are as follows: addr-not-loaded indicates the val… |