Parameter indicating the number of times DMA
will attempt retry in case of bus error
before giving up.
Minimal value: 0. maximal value 30.
Factory default: 30.
To change this object, load
'fibTmuFunctDmaThreshPerm'
into non-volatile ram.
The value written into non volatile memory
is loaded into the current value only
after reset.
Parsed from file fibr_FR9230.mib.txt
Company: None
Module: TMU-MIB
Parameter indicating the number of times DMA
will attempt retry in case of bus error
before giving up.
Minimal value: 0. maximal value 30.
Factory default: 30.
To change this object, load
'fibTmuFunctDmaThreshPerm'
into non-volatile ram.
The value written into non volatile memory
is loaded into the current value only
after reset.
Parsed from file TMU-MIB.mib
Module: TMU-MIB
Vendor: Fibronics
Module: TMU-MIB
[Automatically extracted from oidview.com]
fibTmuFunctDmaThreshRun OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-only STATUS mandatory DESCRIPTION "Parameter indicating the number of times DMA will attempt retry in case of bus error before giving up. Minimal value: 0. maximal value 30. Factory default: 30. To change this object, load 'fibTmuFunctDmaThreshPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset." ::= { fibTmuFunctRtpGrpVrsRun 25 }
fibTmuFunctDmaThreshRun OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-only STATUS mandatory DESCRIPTION "Parameter indicating the number of times DMA will attempt retry in case of bus error before giving up. Minimal value: 0. maximal value 30. Factory default: 30. To change this object, load 'fibTmuFunctDmaThreshPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset." ::= { fibTmuFunctRtpGrpVrsRun 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.60.8.1.25.0 | fibTmuFunctDmaThreshRun | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.60.8.1.1 | fibTmuFunctBeacon2AutotestRun | 1 | 1 | The time period for starting the 'autoremove' test after start of beaconing. In units of milliseconds. Minimal value: 160. maximal… |
| 1.3.6.1.4.1.22.60.8.1.2 | fibTmuFunctBeacon2OkRun | 1 | 1 | The upper bound for time period starting at the removal of a problem till ring status indicates no beaconing. In units of millise… |
| 1.3.6.1.4.1.22.60.8.1.3 | fibTmuFunctOk2BeaconRun | 1 | 1 | The upper bound for time period starting at the insertion of a problem till ring status indicates beaconing. In units of millisec… |
| 1.3.6.1.4.1.22.60.8.1.4 | fibTmuFunctWrapCwtRun | 1 | 1 | Time delay to apply, after changing warp relay state. In units of milliseconds. Intended to let TMS get the real ring status. Mini… |
| 1.3.6.1.4.1.22.60.8.1.5 | fibTmuFunctWrapWnrRun | 1 | 1 | Flag indicating whether to release CPU while waiting after warp change. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. To chan… |
| 1.3.6.1.4.1.22.60.8.1.6 | fibTmuFunctRingIstRun | 1 | 1 | Time to poll for consistent Tmu ring status before continuing recovery. In units of milliseconds. Minimal value: 0. maximal value … |
| 1.3.6.1.4.1.22.60.8.1.7 | fibTmuFunctRingIstnrRun | 1 | 1 | Flag indicating whether to release CPU while waiting for consistent Tmu ring status. Values: 1 - FALSE, 2 - TRUE. Factory default: … |
| 1.3.6.1.4.1.22.60.8.1.8 | fibTmuFunctCheckAogTauRun | 1 | 1 | Flag is used during BRUTAL recovery (single problem). If TRUE (checck-ring) then check whether the ring is BEACONING after openin… |
| 1.3.6.1.4.1.22.60.8.1.9 | fibTmuFunctMaxNoiRun | 1 | 1 | When several station wants to insert into the ring, this parameter sets the limit on the maximal number of stations which are allo… |
| 1.3.6.1.4.1.22.60.8.1.10 | fibTmuFunctLinkPtifRun | 1 | 1 | When problem in TMU segment is discovered then if this flag is TRUE, first of all try to find problem between last inserted statio… |
| 1.3.6.1.4.1.22.60.8.1.11 | fibTmuFunctInsPatRun | 1 | 1 | Parameter for controlling the aging of the 'inseretion_pool' (Should be long enough to make sure that the station is not malfunct… |
| 1.3.6.1.4.1.22.60.8.1.12 | fibTmuFunctUseMismatchRun | 1 | 1 | Indication on whether to apply recovery when the number of stations is larger than the number of open ports. Values: 1 - FALSE, 2 … |
| 1.3.6.1.4.1.22.60.8.1.13 | fibTmuFunctChkRingInsRun | 1 | 1 | Indication on whether to check ring status (for possible problems caused by the currently inserted stations) or not. Setting 'TRU… |
| 1.3.6.1.4.1.22.60.8.1.14 | fibTmuFunctChkRingPerRun | 1 | 1 | Parameter indicating the elapsed time after letting a station into the ring after which a station is considered to be o.k. See 'fi… |
| 1.3.6.1.4.1.22.60.8.1.15 | fibTmuFunctClaimTimeOutRun | 1 | 1 | Parameter indicating the elapsed time between the detection of a problem and the beginning of sending 'claim'. Units: milli second… |
| 1.3.6.1.4.1.22.60.8.1.16 | fibTmuFunctAnotherCheckRun | 1 | 1 | Indication on whether to perform another check before disabling a port as a cross check. Values: 1 - FALSE, 2 - TRUE. Factory defa… |
| 1.3.6.1.4.1.22.60.8.1.17 | fibTmuFunctTmsOnOutRun | 1 | 1 | Parameter indicating the tms to leave out of the ring when carrying out 'warp out': It could be TMS no. 2 (TMS OUT) or the TMS whi… |
| 1.3.6.1.4.1.22.60.8.1.18 | fibTmuFunctUseJitterRun | 1 | 1 | Indication on whether to use the jitter buster hardware module or not. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. To chang… |
| 1.3.6.1.4.1.22.60.8.1.21 | fibTmuFunctForceStpRiRun | 1 | 1 | This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ri-stp) { r… |
| 1.3.6.1.4.1.22.60.8.1.22 | fibTmuFunctForceStpRoRun | 1 | 1 | This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ro-stp) { r… |
| 1.3.6.1.4.1.22.60.8.1.23 | fibTmuFunctMaxSavRecRun | 1 | 1 | Parameter indicating how many elements to save in the fifo buffer of containing the history of recovery. Minimal value: 5. maximal… |
| 1.3.6.1.4.1.22.60.8.1.24 | fibTmuFunctReadPerRun | 1 | 1 | Parameter indicating the elapsed time between two readings of the error counter of a TMS. Too large a period may result in counte… |
| 1.3.6.1.4.1.22.60.8.1.26 | fibTmuFunctRemWrapTypeRun | 1 | 1 | Parameter indicating the criterion for removing 'wrap': It could be removed when the ring is not beaconing and it could be removed… |
| 1.3.6.1.4.1.22.60.8.1.27 | fibTmuFunctRemWrapLenRun | 1 | 1 | Parameter indicating the elapsed time between the time it is decided that wrap can be removed and the actual removal. See 'fibTmuF… |