Add/Remove member from VPN.
Parsed from file RC-OPM-MIB.mib.txt
Company: avaya
Module: RC-OPM-MIB
rcVpnMemAction OBJECT-TYPE SYNTAX INTEGER { none (0), add (1), remove (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Add/Remove member from VPN." ::= { rcVpnEntry 21 }
Vendor: Avaya
Module: RC-OPM-MIB (RC-OPM-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.37.1.1.1 | rcVpnVpnId | 0 | 0 | Vpn identifier. For the Martini L2s this is the VCId. Distributed in the VFEC to the remote peer (other end point of ). |
| 1.3.6.1.4.1.2272.1.37.1.1.2 | rcVpnMemberId | 0 | 0 | This field along with the Id identifies an end point of a Virtural circuit. In the martini point-to-point this is PortID, where a… |
| 1.3.6.1.4.1.2272.1.37.1.1.3 | rcVpnName | 0 | 0 | For ease of configuration. Can provide either during the configuration or modification of this field is allowed on when the admi… |
| 1.3.6.1.4.1.2272.1.37.1.1.4 | rcVpnPort | 0 | 0 | Providing member. |
| 1.3.6.1.4.1.2272.1.37.1.1.5 | rcVpnQtagNumOrRange | 0 | 0 | List of qtags or range of qtags for this port. ( member) |
| 1.3.6.1.4.1.2272.1.37.1.1.6 | rcVpnLocalSwitch | 0 | 0 | indicate the local switch. |
| 1.3.6.1.4.1.2272.1.37.1.1.7 | rcVpnRemotePeerId | 0 | 0 | Remote LER IP address. |
| 1.3.6.1.4.1.2272.1.37.1.1.8 | rcVpnTunnelGrpId | 0 | 0 | Tunnel group for this to reach remote LER. |
| 1.3.6.1.4.1.2272.1.37.1.1.9 | rcVpnOutBoundLowerBwReq | 0 | 0 | This is part of required parameter to enable the admin status. Specifies the lower guaranteed bandwidth in Mbps. |
| 1.3.6.1.4.1.2272.1.37.1.1.10 | rcVpnOutBoundUpperBwReq | 0 | 0 | This is part of required parameter to enable the admin status. Specifies the upper bandwidth in Mbps. Interpretation of this is b… |
| 1.3.6.1.4.1.2272.1.37.1.1.11 | rcVpnServiceType | 0 | 0 | Type of service offered for the . |
| 1.3.6.1.4.1.2272.1.37.1.1.12 | rcVpnServiceDegrationFactor | 0 | 0 | This value indicates the service degradation factor (percent) either in the case of LSP failure or when bandwidth requirement cha… |
| 1.3.6.1.4.1.2272.1.37.1.1.13 | rcVpnTunnelExpPolicyType | 0 | 0 | This indicates how the Tunnel EXP bits will be defined. Value of this field specify the interpretation of TunnelExpPolicy value. |
| 1.3.6.1.4.1.2272.1.37.1.1.14 | rcVpnTunnelExpPolicy | 0 | 0 | The usage of this field is signaled by TunnelExpPolicyType. If the type is set to Explicit then the value specified is the EXP bi… |
| 1.3.6.1.4.1.2272.1.37.1.1.15 | rcVpnVcGrpId | 0 | 0 | Configuration of VcGroupId has local Significance. it is sent in the VFEC. Used for sending the wildcard withdraw message to all … |
| 1.3.6.1.4.1.2272.1.37.1.1.16 | rcVpnVcLabel | 0 | 0 | This will be updated upon receiving the VFEC from the remote peer. It is 20 bits long |
| 1.3.6.1.4.1.2272.1.37.1.1.17 | rcVpnTunnelLspId | 0 | 0 | Will be updated when Vpn Controller determines which Lsp it is using for the Vpn (based on the bw requirements). This will be upd… |
| 1.3.6.1.4.1.2272.1.37.1.1.18 | rcVpnAdminState | 0 | 0 | Use for configuration. Enable operation is allowed only if the configuration of this entry contains tunnel-group association, me… |
| 1.3.6.1.4.1.2272.1.37.1.1.19 | rcVpnOperState | 0 | 0 | Change of state occurs upon establishing the label mapping i.e., sending the VFEC and receiving the VFEC or changes in Tunnel exi… |
| 1.3.6.1.4.1.2272.1.37.1.1.20 | rcVpnRowStatus | 0 | 0 | uses for controlling the creation and deletion of this row |
| 1.3.6.1.4.1.2272.1.37.1.1.22 | rcVpnQtagNumListSize | 0 | 0 | The Size of qtags or range of qtags for this port. |
| 1.3.6.1.4.1.2272.1.37.1.1.23 | rcVpnClassInteropMode | 0 | 0 | Interoperability mode for a service class attached to an L2-VPN. |
| 1.3.6.1.4.1.2272.1.37.1.1.24 | rcVpnAssociatedPortIfndx | 0 | 0 | Extended Legacy port or MLTport member. |