Hub OPM Mac address if connectio mode is spoke.
if the connection mode is pt2pt theb this is
the OPM Mac address of the other end-point.
Parsed from file RC-TLS-MIB.mib.txt
Company: avaya
Module: RC-TLS-MIB
rcTlsTdiEndptMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Hub OPM Mac address if connectio mode is spoke. if the connection mode is pt2pt theb this is the OPM Mac address of the other end-point." ::= { rcTlsTdiEndptEntry 7 }
Vendor: Avaya
Module: RC-TLS-MIB (RC-TLS-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: MacAddress
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.40.3.1.1 | rcTlsTdiEndptTdId | 0 | 0 | Tdi that the end-point is a member of. |
1.3.6.1.4.1.2272.1.40.3.1.2 | rcTlsTdiEndptUniAddr | 0 | 0 | Uni Address of the end-point. |
1.3.6.1.4.1.2272.1.40.3.1.3 | rcTlsTdiEndptQtags | 0 | 0 | A bitfield used to identify which QTAG is includes in this end point. The Most significant Bit field (bit 0) set represents the Qt… |
1.3.6.1.4.1.2272.1.40.3.1.4 | rcTlsTdiEndptAdminState | 0 | 0 | Admin control of the end-point state. |
1.3.6.1.4.1.2272.1.40.3.1.5 | rcTlsTdiEndptConMode | 0 | 0 | Type of end-point |
1.3.6.1.4.1.2272.1.40.3.1.6 | rcTlsTdiEndptHubUniAddr | 0 | 0 | Hub Uni address if connection mode (ConnMode) is spoke. If the connection mode is pt2pt then this is the Uni address of the other… |
1.3.6.1.4.1.2272.1.40.3.1.8 | rcTlsTdiEndptCosProfileName | 0 | 0 | COS Profile Table Name. |
1.3.6.1.4.1.2272.1.40.3.1.9 | rcTlsTdiEndptPriMapping | 0 | 0 | Maps 802.1p priorities (0-7) to Optical Ethernet Class of Service (COS) values (0-7) for packets across a Uni. The first bytes re… |
1.3.6.1.4.1.2272.1.40.3.1.10 | rcTlsTdiEndptName | 0 | 0 | Name of Endpoint, By default, it would be EP- Example: tdi = 1, uni = 0.0.0.1, rcTlsTdiEndptName would be EP-1.0.0.0.1 |
1.3.6.1.4.1.2272.1.40.3.1.11 | rcTlsTdiEndptMacTblSize | 0 | 0 | The maximum size of the MAC table. No limit if it's set to 0. |
1.3.6.1.4.1.2272.1.40.3.1.12 | rcTlsTdiEndptMacTblWaterMk | 0 | 0 | The Low Water Mark for MAC table size. Set to 90% of the table size, can be over-written. |
1.3.6.1.4.1.2272.1.40.3.1.13 | rcTlsTdiEndptRemoteMacAgeTimer | 0 | 0 | Remote MAC address ageout timer in seconds. |
1.3.6.1.4.1.2272.1.40.3.1.14 | rcTlsTdiEndptLocalMacAgeTimer | 0 | 0 | Local MAC address ageout timer in seconds. |
1.3.6.1.4.1.2272.1.40.3.1.15 | rcTlsTdiEndptOperState | 0 | 0 | The current operational state of this ENDPOINT. |
1.3.6.1.4.1.2272.1.40.3.1.16 | rcTlsTdiEndptPriOverride | 0 | 0 | Enable or disable to override the Priority Mapping. |
1.3.6.1.4.1.2272.1.40.3.1.17 | rcTlsTdiEndptBpduTraffic | 0 | 0 | Bpdu traffic control. |
1.3.6.1.4.1.2272.1.40.3.1.18 | rcTlsTdiEndptAction | 0 | 0 | EndPt related action- Flush Learned MAC addresses. |
1.3.6.1.4.1.2272.1.40.3.1.19 | rcTlsTdiEndptRowStatus | 0 | 0 | Uses for controlling the creation and deletion of this row. |
1.3.6.1.4.1.2272.1.40.3.1.20 | rcTlsTdiEndptOuterQtag | 0 | 0 | Outer qtag for QingQ |
1.3.6.1.4.1.2272.1.40.3.1.21 | rcTlsTdiEndptNumQtagIds | 0 | 0 | Used to indicate the number of Qtag IDs that are stored in the rcTlsTdiEndptQtags variable. |
1.3.6.1.4.1.2272.1.40.3.1.22 | rcTlsTdiEndptEgressCosProfileName | 0 | 0 | Egress COS Profile Table Name. |
1.3.6.1.4.1.2272.1.40.3.1.23 | rcTlsTdiEndptIngressPolicer | 0 | 0 | Enable/disable to use Ingress Cos Profile table (rcTlsTdiEndptCosProfileName) |
1.3.6.1.4.1.2272.1.40.3.1.24 | rcTlsTdiEndptEgressPolicer | 0 | 0 | Enable/disable to use Egress Cos Profile table (rcTlsTdiEndptEgressCosProfileName) |
1.3.6.1.4.1.2272.1.40.3.1.25 | rcTlsTdiEndptMepId | 0 | 0 | Maintenance Endpoint ID, range 1-8191 is valid MepId to be assigned to the Tdi Endpoint. '0' means unassigned Med ID from Tdi End… |
1.3.6.1.4.1.2272.1.40.3.1.26 | rcTlsTdiEndptServiceGroup | 0 | 0 | service group name |
1.3.6.1.4.1.2272.1.40.3.1.27 | rcTlsTdiEndptCcmOperStatus | 0 | 0 | The current CCM operational status of this endpoint. |
1.3.6.1.4.1.2272.1.40.3.1.28 | rcTlsTdiEndptIngressMirrorState | 0 | 0 | disable/enable ingress mirroring on this end-point. |
1.3.6.1.4.1.2272.1.40.3.1.29 | rcTlsTdiEndptEgressMirrorState | 0 | 0 | disable/enable egress mirroring on this end-point. |
1.3.6.1.4.1.2272.1.40.3.1.30 | rcTlsTdiEndptTrunkGroup | 0 | 0 | trunk group name |
1.3.6.1.4.1.2272.1.40.3.1.31 | rcTlsTdiEndptPolicingOption | 0 | 0 | Specify whether the policing is pre-encapsulation or post-encapsulation for TDI Endpoints. |
1.3.6.1.4.1.2272.1.40.3.1.32 | rcTlsTdiEndptPriOverrideType | 0 | 0 | This field indicated whether ToS or DSCP should be used to override P bit when override is enabled. |
1.3.6.1.4.1.2272.1.40.3.1.33 | rcTlsTdiEndptColorBasedRemarking | 0 | 0 | disable/enable color-based egress mapping for this end-point. |
1.3.6.1.4.1.2272.1.40.3.1.34 | rcTlsTdiEndptDropRedColorPackets | 0 | 0 | disable/enable dropping of red-colored packets for this end-point if color-based mapping is used. |
1.3.6.1.4.1.2272.1.40.3.1.35 | rcTlsTdiEndptDefaultTdi | 0 | 0 | disable/enable default Tdi. |
1.3.6.1.4.1.2272.1.40.3.1.36 | rcTlsTdiEndptUserLabel1 | 0 | 0 | User provided field. Used to give extra management information/data |
1.3.6.1.4.1.2272.1.40.3.1.37 | rcTlsTdiEndptUserLabel2 | 0 | 0 | User provided additional field. Used to give extra management information/data |
1.3.6.1.4.1.2272.1.40.3.1.38 | rcTlsTdiEndptL2ptMacSwapCdp | 0 | 0 | disable/enable mac swapping on tdi end-point for CDP protocol |
1.3.6.1.4.1.2272.1.40.3.1.39 | rcTlsTdiEndptL2ptMacSwapVtp | 0 | 0 | disable/enable mac swapping on tdi end-point for VTP protocol |
1.3.6.1.4.1.2272.1.40.3.1.40 | rcTlsTdiEndptL2ptMacSwapStp | 0 | 0 | disable/enable mac swapping on tdi end-point for STP protocol |
1.3.6.1.4.1.2272.1.40.3.1.41 | rcTlsTdiEndptDEDecodeScheme | 0 | 0 | This indicates the DE decode scheme that should be used |
1.3.6.1.4.1.2272.1.40.3.1.42 | rcTlsTdiEndptPcpDecodeMap | 0 | 0 | This indicates the Drop Eligibility bit for each priority. The first byte represents the drop eligibility for priority 0. Subseque… |
1.3.6.1.4.1.2272.1.40.3.1.43 | rcTlsTdiEndptL2cpProfile | 0 | 0 | l2cp profile associated with this end-point. By default NULL L2CP profile will be associated. |