An estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295) and ifHighSpeed must be used to
report the interace's speed. For a sub-layer which
has no concept of bandwidth, this object should be
zero.
Parsed from file rapid_city-accelar.mib.txt
Company: rapidcity
Module: RAPID-CITY
rcTengIfSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { rcTengIfEntry 5 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.50.1.3.1.1 | rcTengIfIndex | 0 | 0 | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. … |
1.3.6.1.4.1.2272.1.50.1.3.1.2 | rcTengIfDescr | 0 | 0 | A textual string containing information about the interface. This string should include the name of the manufacturer, the produc… |
1.3.6.1.4.1.2272.1.50.1.3.1.3 | rcTengIfType | 0 | 0 | rcTengIftype |
1.3.6.1.4.1.2272.1.50.1.3.1.4 | rcTengIfMtu | 0 | 0 | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for… |
1.3.6.1.4.1.2272.1.50.1.3.1.6 | rcTengIfPhysAddress | 0 | 0 | The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and f… |
1.3.6.1.4.1.2272.1.50.1.3.1.7 | rcTengIfAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed sy… |
1.3.6.1.4.1.2272.1.50.1.3.1.8 | rcTengIfOperStatus | 0 | 0 | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If If… |
1.3.6.1.4.1.2272.1.50.1.3.1.9 | rcTengIfLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior t… |
1.3.6.1.4.1.2272.1.50.1.3.1.10 | rcTengIfInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
1.3.6.1.4.1.2272.1.50.1.3.1.11 | rcTengIfInUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast … |
1.3.6.1.4.1.2272.1.50.1.3.1.12 | rcTengIfInNUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast addr… |
1.3.6.1.4.1.2272.1.50.1.3.1.13 | rcTengIfInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
1.3.6.1.4.1.2272.1.50.1.3.1.14 | rcTengIfInErrors | 0 | 0 | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a h… |
1.3.6.1.4.1.2272.1.50.1.3.1.15 | rcTengIfInUnknownProtos | 0 | 0 | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or un… |
1.3.6.1.4.1.2272.1.50.1.3.1.16 | rcTengIfOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
1.3.6.1.4.1.2272.1.50.1.3.1.17 | rcTengIfOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or … |
1.3.6.1.4.1.2272.1.50.1.3.1.18 | rcTengIfOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broa… |
1.3.6.1.4.1.2272.1.50.1.3.1.19 | rcTengIfOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
1.3.6.1.4.1.2272.1.50.1.3.1.20 | rcTengIfOutErrors | 0 | 0 | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-or… |
1.3.6.1.4.1.2272.1.50.1.3.1.21 | rcTengIfOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
1.3.6.1.4.1.2272.1.50.1.3.1.22 | rcTengIfSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this … |