Monitor customer traffic on COS priority
Parsed from file RC-CFM-MIB.mib.txt
Company: avaya
Module: RC-CFM-MIB
rcCfmMonitorCosPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Monitor customer traffic on COS priority" ::= {rcCfmTrap 16}
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.69.9.16.0 | rcCfmMonitorCosPriority | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.69.9.1 | rcCfmTrunkCcmIndication | 1 | 1 | A Trunk CCM indication signifies that the trunk CCM operational status has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.9.2 | rcCfmServiceGroupCcmIndication | 1 | 1 | A Service Group CCM indication signifies that the service group CCM operational status has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.9.3 | rcCfmEndPointCcmIndication | 1 | 1 | A Endpoint CCM indication signifies that the endpoint CCM operational status has changed state to UP or DOWN |
| 1.3.6.1.4.1.2272.1.69.9.4 | rcCfmTrunkGroupIndication | 1 | 1 | A Trunk group CCM indication signifies what kind of protection failure within the trunk group |
| 1.3.6.1.4.1.2272.1.69.9.5 | rcCfmTrunkGroupProtected | 1 | 1 | signifies trunk group was protected or was not protected |
| 1.3.6.1.4.1.2272.1.69.9.6 | rcCfmRemoteMepId | 1 | 1 | Remote Maintenance Endpoint ID |
| 1.3.6.1.4.1.2272.1.69.9.7 | rcCfmLocalMepId | 1 | 1 | Local Maintenance Endpoint ID |
| 1.3.6.1.4.1.2272.1.69.9.8 | rcCfmMepCcmIndication | 1 | 1 | CCM indication signifies that the MEP CCM operational status |
| 1.3.6.1.4.1.2272.1.69.9.9 | rcCfmCvid | 1 | 1 | A value that uniquely identifies the Customer Vlan Id in i-sid endpt. |
| 1.3.6.1.4.1.2272.1.69.9.10 | rcCfmRemoteMacAddr | 1 | 1 | remote MAC address |
| 1.3.6.1.4.1.2272.1.69.9.11 | rcCfmIsidId | 1 | 1 | Service Instance ID of the I component |
| 1.3.6.1.4.1.2272.1.69.9.12 | rcCfmTrapTrunkName | 1 | 1 | PBT Trunk Name |
| 1.3.6.1.4.1.2272.1.69.9.13 | rcCfmPbitNum | 1 | 1 | p-bit value used to queue packets |
| 1.3.6.1.4.1.2272.1.69.9.14 | rcCfmUserLabel1 | 1 | 1 | Memo field |
| 1.3.6.1.4.1.2272.1.69.9.15 | rcCfmUserLabel2 | 1 | 1 | Memo field |
| 1.3.6.1.4.1.2272.1.69.9.17 | rcCfmThresholdIndication | 1 | 1 | A threshold indication is: alarm - when the set-threshold has been exceeded clear - when the clear-threshold level has been reac… |
| 1.3.6.1.4.1.2272.1.69.9.18 | rcCfmActualPercentage | 1 | 1 | Measured Percentage in 1 percent increments |
| 1.3.6.1.4.1.2272.1.69.9.19 | rcCfmActualSubPercentage | 1 | 1 | Measured Sub percentage in 1/100 percent increments |
| 1.3.6.1.4.1.2272.1.69.9.20 | rcCfmAlarmThreshold | 1 | 1 | Configured alarm percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.21 | rcCfmAlarmSubThreshold | 1 | 1 | Configured alarm sub percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.22 | rcCfmClearThreshold | 1 | 1 | Configured clear percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.23 | rcCfmClearSubThreshold | 1 | 1 | Configured clear sub percentage threshold |
| 1.3.6.1.4.1.2272.1.69.9.24 | rcCfmFdTarget | 1 | 1 | frame delay target |
| 1.3.6.1.4.1.2272.1.69.9.25 | rcCfmFdAverage | 1 | 1 | frame delay average |
| 1.3.6.1.4.1.2272.1.69.9.26 | rcCfmTime | 1 | 1 | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.9.27 | rcCfmTrapTrunkGroupName | 1 | 1 | trunk group name. |
| 1.3.6.1.4.1.2272.1.69.9.28 | rcCfmVid | 1 | 1 | A value that uniquely identifies the Customer Vlan Id in i-sid endpt. |
| 1.3.6.1.4.1.2272.1.69.9.29 | rcCfmFdvTarget | 1 | 1 | frame delay variation target |
| 1.3.6.1.4.1.2272.1.69.9.30 | rcCfmFdvAverage | 1 | 1 | frame delay variation average |
| 1.3.6.1.4.1.2272.1.69.9.31 | rcCfmDirection | 1 | 1 | MEP direction |
| 1.3.6.1.4.1.2272.1.69.9.32 | rcCfmDhuId | 1 | 1 | A value that uniquely identifies the DH Uni Id in i-sid endpt. |
| 1.3.6.1.4.1.2272.1.69.9.33 | rcCfmIftlvIndication | 1 | 1 | A Iftlv indication signifies that the operational status of CCM that is sent or received with iftlv has changed state to UP or D… |