This value represents the vendor specified low
Aux1 threshold.
Parsed from file RC-POM-MIB.mib.txt
Company: avaya
Module: RC-POM-MIB
rcPlugOptModAux1LowAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the vendor specified low Aux1 threshold." ::= { rcPlugOptModEntry 44 }
Vendor: Avaya
Module: RC-POM-MIB (RC-POM-MIB.mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.71.1.1.1 | rcPlugOptModPortIndex | 0 | 0 | An index value that uniquely identifies a port on a blade or line-card. |
| 1.3.6.1.4.1.2272.1.71.1.1.2 | rcPlugOptModDdmStatusMask | 0 | 0 | Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. |
| 1.3.6.1.4.1.2272.1.71.1.1.3 | rcPlugOptModCalibration | 0 | 0 | The identifier value indicates type of calibration. |
| 1.3.6.1.4.1.2272.1.71.1.1.4 | rcPlugOptModPowerMeasure | 0 | 0 | The identifier value indicates type of external power. |
| 1.3.6.1.4.1.2272.1.71.1.1.5 | rcPlugOptModConnectorType | 0 | 0 | The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces… |
| 1.3.6.1.4.1.2272.1.71.1.1.6 | rcPlugOptModVendorName | 0 | 0 | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. T… |
| 1.3.6.1.4.1.2272.1.71.1.1.7 | rcPlugOptModVendorPartNumber | 0 | 0 | The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces,… |
| 1.3.6.1.4.1.2272.1.71.1.1.8 | rcPlugOptModVendorRevNumber | 0 | 0 | The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spac… |
| 1.3.6.1.4.1.2272.1.71.1.1.9 | rcPlugOptModVendorSN | 0 | 0 | The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII … |
| 1.3.6.1.4.1.2272.1.71.1.1.10 | rcPlugOptModVendorDateCode | 0 | 0 | The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMD… |
| 1.3.6.1.4.1.2272.1.71.1.1.11 | rcPlugOptModPEC | 0 | 0 | This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel p… |
| 1.3.6.1.4.1.2272.1.71.1.1.12 | rcPlugOptModCLEI | 0 | 0 | This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the d… |
| 1.3.6.1.4.1.2272.1.71.1.1.13 | rcPlugOptModSupportsDDM | 0 | 0 | This boolean indicates whether or not the device supports the DDM capability. |
| 1.3.6.1.4.1.2272.1.71.1.1.14 | rcPlugOptModAux1Monitoring | 0 | 0 | This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV… |
| 1.3.6.1.4.1.2272.1.71.1.1.15 | rcPlugOptModAux2Monitoring | 0 | 0 | This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltag… |
| 1.3.6.1.4.1.2272.1.71.1.1.16 | rcPlugOptModWaveLength | 0 | 0 | Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters. |
| 1.3.6.1.4.1.2272.1.71.1.1.17 | rcPlugOptModTemperature | 0 | 0 | This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can r… |
| 1.3.6.1.4.1.2272.1.71.1.1.18 | rcPlugOptModTemperatureHighAlarmThreshold | 0 | 0 | This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperatur… |
| 1.3.6.1.4.1.2272.1.71.1.1.19 | rcPlugOptModTemperatureLowAlarmThreshold | 0 | 0 | This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a tempera… |
| 1.3.6.1.4.1.2272.1.71.1.1.20 | rcPlugOptModTemperatureHighWarningThreshold | 0 | 0 | This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a te… |
| 1.3.6.1.4.1.2272.1.71.1.1.21 | rcPlugOptModTemperatureLowWarningThreshold | 0 | 0 | This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a… |
| 1.3.6.1.4.1.2272.1.71.1.1.22 | rcPlugOptModVoltage | 0 | 0 | This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from … |
| 1.3.6.1.4.1.2272.1.71.1.1.23 | rcPlugOptModVoltageHighAlarmThreshold | 0 | 0 | This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is … |
| 1.3.6.1.4.1.2272.1.71.1.1.24 | rcPlugOptModVoltageLowAlarmThreshold | 0 | 0 | This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage i… |
| 1.3.6.1.4.1.2272.1.71.1.1.25 | rcPlugOptModVoltageHighWarningThreshold | 0 | 0 | This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high vol… |
| 1.3.6.1.4.1.2272.1.71.1.1.26 | rcPlugOptModVoltageLowWarningThreshold | 0 | 0 | This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low v… |
| 1.3.6.1.4.1.2272.1.71.1.1.27 | rcPlugOptModBias | 0 | 0 | This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 mic… |
| 1.3.6.1.4.1.2272.1.71.1.1.28 | rcPlugOptModBiasHighAlarmThreshold | 0 | 0 | This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high curren… |
| 1.3.6.1.4.1.2272.1.71.1.1.29 | rcPlugOptModBiasLowAlarmThreshold | 0 | 0 | This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low curr… |
| 1.3.6.1.4.1.2272.1.71.1.1.30 | rcPlugOptModBiasHighWarningThreshold | 0 | 0 | This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a hig… |
| 1.3.6.1.4.1.2272.1.71.1.1.31 | rcPlugOptModBiasLowWarningThreshold | 0 | 0 | This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a … |
| 1.3.6.1.4.1.2272.1.71.1.1.32 | rcPlugOptModTxPower | 0 | 0 | This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts … |
| 1.3.6.1.4.1.2272.1.71.1.1.33 | rcPlugOptModTxPowerHighAlarmThreshold | 0 | 0 | This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a… |
| 1.3.6.1.4.1.2272.1.71.1.1.34 | rcPlugOptModTxPowerLowAlarmThreshold | 0 | 0 | This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value… |
| 1.3.6.1.4.1.2272.1.71.1.1.35 | rcPlugOptModTxPowerHighWarningThreshold | 0 | 0 | This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this … |
| 1.3.6.1.4.1.2272.1.71.1.1.36 | rcPlugOptModTxPowerLowWarningThreshold | 0 | 0 | This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below th… |
| 1.3.6.1.4.1.2272.1.71.1.1.37 | rcPlugOptModRxPower | 0 | 0 | This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can r… |
| 1.3.6.1.4.1.2272.1.71.1.1.38 | rcPlugOptModRxPowerHighAlarmThreshold | 0 | 0 | This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a re… |
| 1.3.6.1.4.1.2272.1.71.1.1.39 | rcPlugOptModRxPowerLowAlarmThreshold | 0 | 0 | This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a… |
| 1.3.6.1.4.1.2272.1.71.1.1.40 | rcPlugOptModRxPowerHighWarningThreshold | 0 | 0 | This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this val… |
| 1.3.6.1.4.1.2272.1.71.1.1.41 | rcPlugOptModRxPowerLowWarningThreshold | 0 | 0 | This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this … |
| 1.3.6.1.4.1.2272.1.71.1.1.42 | rcPlugOptModAux1 | 0 | 0 | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.43 | rcPlugOptModAux1HighAlarmThreshold | 0 | 0 | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.45 | rcPlugOptModAux1HighWarningThreshold | 0 | 0 | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.46 | rcPlugOptModAux1LowWarningThreshold | 0 | 0 | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.47 | rcPlugOptModAux2 | 0 | 0 | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.48 | rcPlugOptModAux2HighAlarmThreshold | 0 | 0 | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.49 | rcPlugOptModAux2LowAlarmThreshold | 0 | 0 | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.50 | rcPlugOptModAux2HighWarningThreshold | 0 | 0 | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.51 | rcPlugOptModAux2LowWarningThreshold | 0 | 0 | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.52 | rcPlugOptModTemperatureStatus | 0 | 0 | Used to indicate the current temperature status |
| 1.3.6.1.4.1.2272.1.71.1.1.53 | rcPlugOptModVoltageStatus | 0 | 0 | Used to indicate the current voltage status |
| 1.3.6.1.4.1.2272.1.71.1.1.54 | rcPlugOptModBiasStatus | 0 | 0 | Used to indicate the current laser bias status |
| 1.3.6.1.4.1.2272.1.71.1.1.55 | rcPlugOptModTxPowerStatus | 0 | 0 | Used to indicate the current transmitter power status |
| 1.3.6.1.4.1.2272.1.71.1.1.56 | rcPlugOptModRxPowerStatus | 0 | 0 | Used to indicate the current receiver power status |
| 1.3.6.1.4.1.2272.1.71.1.1.57 | rcPlugOptModAux1Status | 0 | 0 | Used to indicate the current Aux1 status |
| 1.3.6.1.4.1.2272.1.71.1.1.58 | rcPlugOptModAux2Status | 0 | 0 | Used to indicate the current Aux2 status |