The value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable ports, in that case the criteria for
state is PortOperStatus.
Vlan is considered as UP if atleast one member of the
port based vlan has link up, or atleast one port member
of the policy based has an entry in the MGID or atleast
one static member of the policy based vlan has link up.
Otherwise, vlan is considered as DOWN.
If the value is 'true' then the interface state change
will not be notified to layer 3. (i.e., it always stays
up). If the value is 'false' then the vlan state change
will be notified to layer 3 so that IP related status
reflects routable interface state.
Parsed from file xlr30.mib.txt
Company: None
Module: RAPID-CITY-MIB
The value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable ports, in that case the criteria for
state is PortOperStatus.
Vlan is considered as UP if atleast one member of the
port based vlan has link up, or atleast one port member
of the policy based has an entry in the MGID or atleast
one static member of the policy based vlan has link up.
Otherwise, vlan is considered as DOWN.
If the value is 'true' then the interface state change
will not be notified to layer 3. (i.e., it always stays
up). If the value is 'false' then the vlan state change
will be notified to layer 3 so that IP related status
reflects routable interface state.
Parsed from file RAPID-CITY.mib
Module: RAPID-CITY
rcIpConfAdvertiseWhenDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state." DEFVAL { false } ::= { rcIpConfEntry 13 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
rcIpConfAdvertiseWhenDown OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state." DEFVAL { false } ::= { rcIpConfEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.8.1.1.1.1 | rcIpConfIfIndex | 0 | 0 | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.1.1.2 | rcIpConfAdvertDefRte | 0 | 0 | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.3 | rcIpConfAcceptDefRte | 0 | 0 | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.4 | rcIpConfRowStatus | 0 | 0 | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.5 | rcIpConfRipEnable | 0 | 0 | Enable or disable RIP routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.6 | rcIpConfOspfEnable | 0 | 0 | Enable or disable OSPF routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.7 | rcIpConfIgmpEnable | 0 | 0 | Enable or disable IGMP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.8 | rcIpConfAddrAssigned | 0 | 0 | Indicate whether IpAddress has been assigned for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.9 | rcIpConfDhcpEnable | 0 | 0 | Enable or disable DHCP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.10 | rcIpConfTriggeredUpdateEnable | 0 | 0 | rcIpConftriggeredUpdateEnable |
| 1.3.6.1.4.1.2272.1.8.1.1.1.11 | rcIpConfAutoAggrerateEnable, rcIpConfRipAutoAggrerateEnable | 0 | 0 | Used to indicate whether the auto aggregation feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.12 | rcIpConfGenerateDefaultRoute, rcIpConfRipGenerateDefaultRoute | 0 | 0 | Used to indicate whether to generate a default RIP route on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.14 | rcIpConfDirectBroadcastEnable | 0 | 0 | Used to indicate whether this interface should forward direct broadcast traffic |
| 1.3.6.1.4.1.2272.1.8.1.1.1.15 | rcIpConfRipInPolicy | 0 | 0 | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.16 | rcIpConfRipOutPolicy | 0 | 0 | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.17 | rcIpConfOspfIfType | 0 | 0 | rcIpConfOspfIftype |
| 1.3.6.1.4.1.2272.1.8.1.1.1.18 | rcIpConfRipCost | 0 | 0 | Used to indicate the rip cost for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.19 | rcIpConfRipHolddown | 0 | 0 | Used to indicate the rip holddown timer for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.20 | rcIpConfRipTimeout | 0 | 0 | Used to indicate the rip timeout interval for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.21 | rcIpConfRsmltEnable | 0 | 0 | Used to enable Route Smlt feature. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.22 | rcIpConfReversePathCheckEnable | 0 | 0 | Used to indicate whether this interface should perform Reverse Path Check |
| 1.3.6.1.4.1.2272.1.8.1.1.1.23 | rcIpConfReversePathCheckMode | 0 | 0 | Reverse Path Checking mode. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.24 | rcIpConfIsisEnable | 0 | 0 | Enable/disable Isis on this IP interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.25 | rcIpConfBfdEnable | 0 | 0 | Enable or disable BFD on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.26 | rcIpConfIpVpnLiteEnable | 0 | 0 | Enable or disable ipvpn-lite capability on the specified circuitless ip interface. |