rcIpConfGlobal OBJECT IDENTIFIER ::= { rcIpConf 6 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
rcIpConfGlobal OBJECT IDENTIFIER ::= { rcIpConf 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.8.1.6.1 | rcIpConfGlobalRipHoldDownTime | 1 | 1 | Used to set the system-wide RIP hold down time in seconds. |
1.3.6.1.4.1.2272.1.8.1.6.2 | rcIpConfGlobalIcmpNetUnreach | 1 | 1 | Used to set the icmp net unreach feature enable/disable. |
1.3.6.1.4.1.2272.1.8.1.6.3 | rcIpConfGlobalEcmpEnable | 1 | 1 | Used to set the ecmp enable/disable. |
1.3.6.1.4.1.2272.1.8.1.6.4 | rcIpConfGlobalEcmpMaxPath | 1 | 1 | Used to globally configure maximum ECMP paths number. |
1.3.6.1.4.1.2272.1.8.1.6.5 | rcIpConfGlobalAlternativeEnable | 1 | 1 | Used to globally configure alternative enable. |
1.3.6.1.4.1.2272.1.8.1.6.6 | rcIpConfGlobalRouteDiscoveryEnable | 1 | 1 | Enable/disable ICMP Route Discovery feature |
1.3.6.1.4.1.2272.1.8.1.6.8 | rcIpConfGlobalRipTimeOutInterval | 1 | 1 | Rip TimeOut Interval in seconds |
1.3.6.1.4.1.2272.1.8.1.6.9 | rcIpConfGlobalRipDefImportMetric | 1 | 1 | Rip def import metric |
1.3.6.1.4.1.2272.1.8.1.6.10 | rcIpConfGlobalEcmp1PathList | 1 | 1 | Routes to networks specified in this prefix-list can have upto 1 ECMP path, irrespective of ecmp-max-path configuration |
1.3.6.1.4.1.2272.1.8.1.6.11 | rcIpConfGlobalEcmp2PathList | 1 | 1 | Routes to networks specified in this prefix-list can have upto 2 ECMP path, irrespective of ecmp-max-path configuration. |
1.3.6.1.4.1.2272.1.8.1.6.12 | rcIpConfGlobalEcmp3PathList | 1 | 1 | Routes to networks specified in this prefix-list can have upto 3 ECMP path, irrespective of ecmp-max-path configuration. |
1.3.6.1.4.1.2272.1.8.1.6.13 | rcIpConfGlobalEcmp4PathList | 1 | 1 | Routes to networks specified in this prefix-list can have upto 4 ECMP path, irrespective of ecmp-max-path configuration. |
1.3.6.1.4.1.2272.1.8.1.6.14 | rcIpConfGlobalEcmpPathListApply | 1 | 1 | This is to apply any changes in ECMP path list configuration or in the prefix-lists configured to be used as path list |
1.3.6.1.4.1.2272.1.8.1.6.15 | rcIpConfGlobalIcmpRedirectMsg | 1 | 1 | None |
1.3.6.1.4.1.2272.1.8.1.6.16 | rcIpConfGlobalMulticastMacFloodingStatus | 1 | 1 | None |
1.3.6.1.4.1.2272.1.8.1.6.17 | rcIpConfGlobalArpThreshold | 1 | 1 | Defines the maximum number of outstanding arp request a switch can generate. |
1.3.6.1.4.1.2272.1.8.1.6.18 | rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable | 1 | 1 | Used to determine whether more specific non local routes will go into the routing table. |
1.3.6.1.4.1.2272.1.8.1.6.19 | rcIpConfGlobalUdpCheckSumEnable | 1 | 1 | Enable/disable UDP checksum calculation. |
1.3.6.1.4.1.2272.1.8.1.6.20 | rcIpConfGlobalSuperNetEnable | 1 | 1 | Used to globally enable Supernetting/ CIDR routing for IP |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.8.1.1 | rcIpConfTable | 1 | 27 | rcIpConftable |
1.3.6.1.4.1.2272.1.8.1.2 | rcIpConfOspfTable | 1 | 13 | rcIpConfOspftable |
1.3.6.1.4.1.2272.1.8.1.3 | rcIpConfOspfDefaultMetric | 4 | 8 | None |
1.3.6.1.4.1.2272.1.8.1.4 | rcIpConfOspf | 5 | 10 | None |
1.3.6.1.4.1.2272.1.8.1.5 | rcIpConfIgmp | 1 | 2 | None |
1.3.6.1.4.1.2272.1.8.1.7 | rcIpConfOspfAreaTable | 1 | 4 | A table used to maintain OSPF information for a particular Area. |
1.3.6.1.4.1.2272.1.8.1.8 | rcIpConfV2Table | 1 | 14 | A table used to maintain IP routing information for a particular interface. |
1.3.6.1.4.1.2272.1.8.1.9 | rcIpConfOspfV2Table | 1 | 11 | A table used to maintain OSPF information for a particular interface. |
1.3.6.1.4.1.2272.1.8.1.10 | rcIpConfOspfAreaAggregateTable | 1 | 7 | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
1.3.6.1.4.1.2272.1.8.1.11 | rcIpConfRsmltTable | 1 | 5 | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
1.3.6.1.4.1.2272.1.8.1.12 | rcIpConfBfdTable | 1 | 7 | BFD configuration table |