rcIpMplsLdpGroup OBJECT IDENTIFIER ::= { rcIpMpls 5 }
Vendor: Avaya
Module: RC-IP-MPLS-MIB (RC-IP-MPLS-MIB.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.8.102.5.1 | rcIpMplsLdpAdminStatus | 1 | 1 | Indicates qhetehr global LDP is enabled or disabled. |
1.3.6.1.4.1.2272.1.8.102.5.2 | rcIpMplsLdpHoldTime | 1 | 1 | Keep alive time for LDP peers. |
1.3.6.1.4.1.2272.1.8.102.5.3 | rcIpMplsLdpHelloHoldTime | 1 | 1 | Time for receiving link hello messages from peer. |
1.3.6.1.4.1.2272.1.8.102.5.4 | rcIpMplsLdpHelloInterval | 1 | 1 | Frequency of sending hello messages to peer. |
1.3.6.1.4.1.2272.1.8.102.5.5 | rcIpMplsLdpMaxHops | 1 | 1 | Maximum number of LSP hops for setting up an LSP. |
1.3.6.1.4.1.2272.1.8.102.5.6 | rcIpMplsLdpPathVectorLimit | 1 | 1 | Max hop count for loop detection. |
1.3.6.1.4.1.2272.1.8.102.5.7 | rcIpMplsLdpTgtHelloHoldTime | 1 | 1 | Time for receiving targetted link hello messages. |
1.3.6.1.4.1.2272.1.8.102.5.8 | rcIpMplsLdpLoopDetFlag | 1 | 1 | Flag to set loop detection capability. |
1.3.6.1.4.1.2272.1.8.102.5.9 | rcIpMplsLdpLblMergeFlag | 1 | 1 | Not used in this release. |
1.3.6.1.4.1.2272.1.8.102.5.10 | rcIpMplsLdpAuthFlag | 1 | 1 | Not used in this release. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.8.102.0 | rcIpMplsMib | 0 | 0 | RC-IP-MPLS-MIB |
1.3.6.1.4.1.2272.1.8.102.1 | rcIpMplsGlobalGroup | 12 | 24 | None |
1.3.6.1.4.1.2272.1.8.102.2 | rcIpMplsInterfaceTableSize | 1 | 1 | Size of Mpls Interface Table |
1.3.6.1.4.1.2272.1.8.102.3 | rcIpMplsInterfaceTable | 1 | 17 | Table of configured Mpls Interfaces. |
1.3.6.1.4.1.2272.1.8.102.4 | rcIpMplsRsvpGroup | 27 | 54 | None |
1.3.6.1.4.1.2272.1.8.102.6 | rcIpMplsLdpInterfaceTableSize | 1 | 1 | Size of Mpls LDP Interface Table |
1.3.6.1.4.1.2272.1.8.102.7 | rcIpMplsLdpInterfaceTable | 1 | 8 | Table of configured Mpls LDP Interfaces. |
1.3.6.1.4.1.2272.1.8.102.8 | rcIpMplsRsvpInterfaceTableSize | 1 | 1 | Size of Mpls RSVP Interface Table |
1.3.6.1.4.1.2272.1.8.102.9 | rcIpMplsRsvpInterfaceTable | 1 | 11 | Table of configured Mpls RSVP Interfaces. |
1.3.6.1.4.1.2272.1.8.102.10 | rcIpMplsLdpTargetAddrTableSize | 1 | 1 | Size of Mpls LDP target address Table |
1.3.6.1.4.1.2272.1.8.102.11 | rcIpMplsLdpTargetAddrTable | 1 | 4 | Table of configured Mpls LDP target addresses. |
1.3.6.1.4.1.2272.1.8.102.12 | rcIpMplsTunnelGroupTable | 1 | 12 | Table of Tunnel Groups. |
1.3.6.1.4.1.2272.1.8.102.13 | rcIpMplsTeGroup | 2 | 4 | None |
1.3.6.1.4.1.2272.1.8.102.14 | rcIpMplsTeInterfaceTable | 1 | 9 | rcIpMplsInterface Traffic-Eng table. This table contains rows which are traffic-eng configuration parameters for the link. |
1.3.6.1.4.1.2272.1.8.102.15 | rcIpMplsTunnelTable | 1 | 4 | Table of Tunnels with label record info . |
1.3.6.1.4.1.2272.1.8.102.16 | rcIpMplsTunnelExtTable | 1 | 7 | The mplsTunnelExtTable provides enterprise extension options for a mplsTunnelEntry that has be created for a MPLS tunnel. The mpl… |
1.3.6.1.4.1.2272.1.8.102.17 | rcIpMplsTunnelFrrTable | 1 | 12 | The rcIpMplsTunnelFrrTable is used to indicate the frr constraints for a frr detour LSP for a tunnel specified as row entry in th… |
1.3.6.1.4.1.2272.1.8.102.18 | rcIpMplsTunnelHopToIpAddrMapTable | 1 | 5 | The rcIpMplsTunnelHopToIpAddrMapTable is used to maintain mapping between Hop name and IP Address. |
1.3.6.1.4.1.2272.1.8.102.19 | rcIpMplsLspTable | 1 | 12 | Table of originated, terminated and transit operational LSPs with all cross connect information |
1.3.6.1.4.1.2272.1.8.102.20 | rcIpMplsIfTable | 1 | 19 | rcIpMplsIftable |