adminDownload OBJECT-TYPE
SYNTAX INTEGER {
temporaryChange(1),
permanentChange(2),
downloadSuccess(3),
tftpFailed(4),
badFile(5),
tftpUndefined(6),
tftpFileNotFound(7),
tftpAccessViolation(8),
tftpIllegalOperation(10),
tftpUnknownTransferID(11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A write to adminDownload of temporaryChange(1) or
permanentChange(2) causes the LANtern network
monitor to discontinue its normal functions and
perform a TFTP read of the file specified by
adminDownLoadFile from the server specified by
adminDownLoadServer into RAM. Upon successful
completion of the file transfer, the new image is
written to the flash EPROM memory (permanentChange
only), destroying the previous image. The LANtern
network monitor then performs a warm restart to
activate the new image.
A read of adminDownLoad returns the status of the
last download. The values temporaryChange(1) and
permanentChange(2) indicate a download is in
progress. tftpFailed(4) indicates the server
failed to respond or the transfer timed out.
badFile(5) occurs if the LANtern network monitor
determines the downloaded file has been corrupted
or is not a LANtern executable. All other error
codes are the values defined by the TFTP protocol
[RFC 783], offset by six.
Note: adminDownloadFile and adminDownLoadServer
must be set prior (separate PDU) to setting
adminDownLoad."
View at oid-info.com
A write to adminDownload of temporaryChange(1) or
permanentChange(2) causes the LANtern network
monitor to discontinue its normal functions and
perform a TFTP read of the file specified by
adminDownLoadFile from the server specified by
adminDownLoadServer into RAM. Upon successful
completion of the file transfer, the new image is
written to the flash EPROM memory (permanentChange
only), destroying the previous image. The LANtern
network monitor then performs a warm restart to
activate the new image.
A read of adminDownLoad returns the status of the
last download. The values temporaryChange(1) and
permanentChange(2) indicate a download is in
progress. tftpFailed(4) indicates the server
failed to respond or the transfer timed out.
badFile(5) occurs if the LANtern network monitor
determines the downloaded file has been corrupted
or is not a LANtern executable. All other error
codes are the values defined by the TFTP protocol
[RFC 783], offset by six.
Note: adminDownloadFile and adminDownLoadServer
must be set prior (separate PDU) to setting
adminDownLoad.
Parsed from file LANTERN.MIB.txt
Company: None
Module: Novell-LANtern-MIB
A write to adminDownload of temporaryChange(1) or
permanentChange(2) causes the LANtern network
monitor to discontinue its normal functions and
perform a TFTP read of the file specified by
adminDownLoadFile from the server specified by
adminDownLoadServer into RAM. Upon successful
completion of the file transfer, the new image is
written to the flash EPROM memory (permanentChange
only), destroying the previous image. The LANtern
network monitor then performs a warm restart to
activate the new image.
A read of adminDownLoad returns the status of the
last download. The values temporaryChange(1) and
permanentChange(2) indicate a download is in
progress. tftpFailed(4) indicates the server
failed to respond or the transfer timed out.
badFile(5) occurs if the LANtern network monitor
determines the downloaded file has been corrupted
or is not a LANtern executable. All other error
codes are the values defined by the TFTP protocol
[RFC 783], offset by six.
Note: adminDownloadFile and adminDownLoadServer
must be set prior (separate PDU) to setting
adminDownLoad.
Parsed from file Novell-LANtern-Admin-MIB.mib
Module: Novell-LANtern-Admin-MIB
Automatically extracted from Nwlanz2.mib
adminDownload OBJECT-TYPE SYNTAX INTEGER { temporaryChange(1), permanentChange(2), downloadSuccess(3), tftpFailed(4), badFile(5), tftpUndefined(6), tftpFileNotFound(7), tftpAccessViolation(8), tftpIllegalOperation(10), tftpUnknownTransferID(11) } ACCESS read-write STATUS mandatory DESCRIPTION "A write to adminDownload of temporaryChange(1) or permanentChange(2) causes the LANtern network monitor to discontinue its normal functions and perform a TFTP read of the file specified by adminDownLoadFile from the server specified by adminDownLoadServer into RAM. Upon successful completion of the file transfer, the new image is written to the flash EPROM memory (permanentChange only), destroying the previous image. The LANtern network monitor then performs a warm restart to activate the new image. A read of adminDownLoad returns the status of the last download. The values temporaryChange(1) and permanentChange(2) indicate a download is in progress. tftpFailed(4) indicates the server failed to respond or the transfer timed out. badFile(5) occurs if the LANtern network monitor determines the downloaded file has been corrupted or is not a LANtern executable. All other error codes are the values defined by the TFTP protocol [RFC 783], offset by six. Note: adminDownloadFile and adminDownLoadServer must be set prior (separate PDU) to setting adminDownLoad." ::= { lanternAdmin 18 }
adminDownload OBJECT-TYPE SYNTAX INTEGER { temporaryChange(1), permanentChange(2), downloadSuccess(3), tftpFailed(4), badFile(5), tftpUndefined(6), tftpFileNotFound(7), tftpAccessViolation(8), tftpIllegalOperation(10), tftpUnknownTransferID(11) } ACCESS read-write STATUS mandatory DESCRIPTION "A write to adminDownload of temporaryChange(1) or permanentChange(2) causes the LANtern network monitor to discontinue its normal functions and perform a TFTP read of the file specified by adminDownLoadFile from the server specified by adminDownLoadServer into RAM. Upon successful completion of the file transfer, the new image is written to the flash EPROM memory (permanentChange only), destroying the previous image. The LANtern network monitor then performs a warm restart to activate the new image. A read of adminDownLoad returns the status of the last download. The values temporaryChange(1) and permanentChange(2) indicate a download is in progress. tftpFailed(4) indicates the server failed to respond or the transfer timed out. badFile(5) occurs if the LANtern network monitor determines the downloaded file has been corrupted or is not a LANtern executable. All other error codes are the values defined by the TFTP protocol [RFC 783], offset by six. Note: adminDownloadFile and adminDownLoadServer must be set prior (separate PDU) to setting adminDownLoad." ::= { lanternAdmin 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23.2.1.1.18.0 | adminDownload | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23.2.1.1.1 | adminIdentification | 1 | 1 | An identifying ASCII string may be attached to the LANtern network monitor by writing adminIdentification. Conversely, the LANte… |
| 1.3.6.1.4.1.23.2.1.1.2 | adminDateAndTime | 1 | 1 | Reading adminDateAndTime returns the current date and time in use by the LANtern network monitor. The LANtern network monitor's d… |
| 1.3.6.1.4.1.23.2.1.1.3 | adminTimeZone | 1 | 1 | A DisplayString defining the time zone of the LANtern network monitor. adminTimeZone is neither parsed nor used by the LANtern n… |
| 1.3.6.1.4.1.23.2.1.1.4 | adminPowerOnTime | 1 | 1 | The date and time when the LANtern network monitor was last powered on or restarted. |
| 1.3.6.1.4.1.23.2.1.1.5 | adminPowerOffTime | 1 | 1 | The date and time when the LANtern network monitor was last powered off or restarted. The value is 0 (midnight, 1 January 1900) … |
| 1.3.6.1.4.1.23.2.1.1.6 | adminNetworkDataLink | 1 | 1 | The type of data link encapsulation to be used on the monitored network. adminNetworkDataLink may be written at any time; howeve… |
| 1.3.6.1.4.1.23.2.1.1.7 | adminNetworkIPAddr | 1 | 1 | The IP address to be used by the LANtern network monitor on the monitored network. adminNetworkIPAddr may be written at any time;… |
| 1.3.6.1.4.1.23.2.1.1.8 | adminNetworkSubnetMask | 1 | 1 | The subnet mask for the monitored network. adminNetworkSubnetMask may be written at any time; however, the change does not take e… |
| 1.3.6.1.4.1.23.2.1.1.9 | adminNetworkGateway | 1 | 1 | The IP address of a gateway directly connected to the monitored network (the LANtern network monitor's default gateway). adminNe… |
| 1.3.6.1.4.1.23.2.1.1.10 | adminClientTable | 1 | 5 | A table providing data on all authorized LANtern clients. The table is accessed by adminClientIPAddr. A new entry may be create… |
| 1.3.6.1.4.1.23.2.1.1.11 | adminUnauthorizedIPAddr | 1 | 1 | The IP address of the station that generated the authentication failure. |
| 1.3.6.1.4.1.23.2.1.1.12 | adminUnauthorizedCommunity | 1 | 1 | The community name string used in the PDU that generated the authentication failure. |
| 1.3.6.1.4.1.23.2.1.1.13 | adminNotificationTable | 1 | 9 | A list of all stations wishing to receive traps from the LANtern network monitor; accessed by adminNotificationIPAddr. A new ent… |
| 1.3.6.1.4.1.23.2.1.1.14 | adminTrapHandle | 1 | 1 | A unique handle that is generated for each trap issued and that is passed in the trap-PDU along with any other variable bindings. |
| 1.3.6.1.4.1.23.2.1.1.15 | adminTrapAcknowledge | 1 | 1 | A trap is acknowledged by writing the value of adminTrapHandle passed in the trap-PDU to adminTrapAcknowledge. |
| 1.3.6.1.4.1.23.2.1.1.16 | adminDownLoadFile | 1 | 1 | The name of the executable file to be downloaded from adminDownLoadServer. |
| 1.3.6.1.4.1.23.2.1.1.17 | adminDownLoadServer | 1 | 1 | The name of the file server from which to download a new executable image (adminDownLoadFile). |
| 1.3.6.1.4.1.23.2.1.1.19 | adminReset | 1 | 1 | A write to adminReset causes the LANtern network monitor to discontinue its normal functions and commence a restart sequence. Th… |
| 1.3.6.1.4.1.23.2.1.1.20 | adminSerialDataLink | 1 | 1 | The type of data link encapsulation to be used on the serial line. adminSerialDataLink may be written at any time; however, the … |
| 1.3.6.1.4.1.23.2.1.1.21 | adminSerialIPAddr | 1 | 1 | The IP address currently in use by the LANtern network monitor on the serial channel. adminSerialIPAddr may be written at any tim… |
| 1.3.6.1.4.1.23.2.1.1.22 | adminSerialSubnetMask | 1 | 1 | The subnet mask for the serial channel. adminSerialSubnetMask may be written at any time; however, the change does not take effec… |
| 1.3.6.1.4.1.23.2.1.1.23 | adminSerialBaudRate | 1 | 1 | A codification of the baud rate to be used on the serial line for incoming calls or when the line is directly connected. Change … |
| 1.3.6.1.4.1.23.2.1.1.24 | adminSerialTimeout | 1 | 1 | Once a phone connection has been established, the LANtern network monitor maintains that connection until either the other end ha… |
| 1.3.6.1.4.1.23.2.1.1.25 | adminSerialConnection | 1 | 1 | The type of connection used by the serial line. adminSerialConnection may be written at any time; however, the change does not ta… |
| 1.3.6.1.4.1.23.2.1.1.26 | adminSerialFlowControl | 1 | 1 | The type of flow control used on the serial line. adminSerialFlowControl may be written at any time; however, the change does not… |
| 1.3.6.1.4.1.23.2.1.1.27 | adminModemControl | 1 | 1 | A delimited string containing commands to initialize, dial, and hang up the modem. See Section 3.1.2 for more details on the for… |
| 1.3.6.1.4.1.23.2.1.1.28 | adminModemConnect | 1 | 1 | A delimited string containing baud rates and modem responses when it connects at particular baud rates. See Section 3.1.2 for mo… |
| 1.3.6.1.4.1.23.2.1.1.29 | adminModemNoConnect | 1 | 1 | A delimited string containing baud rates and modem responses when it connects at particular baud rates. See Section 3 for more de… |
| 1.3.6.1.4.1.23.2.1.1.30 | adminGatewayControl | 1 | 1 | A switch to enable or disable IP gatewaying between the serial line and the network. See Section 3 for more details on the format… |
| 1.3.6.1.4.1.23.2.1.1.31 | adminPhoneTable | 1 | 7 | A table that provides information about each possible phone connection that can be made over the serial channel. The table is ac… |
| 1.3.6.1.4.1.23.2.1.1.32 | adminFCBControl | 1 | 1 | A switch to disable the packet capture feature. To enable this flag (after disabling it) a cool start must apply to the LANtern i… |