conBasGroupType OBJECT-TYPE
SYNTAX INTEGER {
physical(1),
external(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In Token Ring hubs, the management procedures can
detect and report on stations other than those
directly connected to the hub via a hub port. A
special group, external(2), has been allocated for
these ports. The format of the external(2) group
is identical to the physical(2) groups in all
respects. However, the ports may exist on an
external hub or connected to the local hub via
a MAU.
In every hub, one external(2) group will exist. The
very first port in the hub is always the local
hub port, with the remaining ports as the
external ones. Whenever a new external port is
detected, it is added to this group, and a
conNewPort trap is generated indicating the new
port number."
View at oid-info.com
In Token Ring hubs, the management procedures can
detect and report on stations other than those
directly connected to the hub via a hub port. A
special group, external(2), has been allocated for
these ports. The format of the external(2) group
is identical to the physical(2) groups in all
respects. However, the ports may exist on an
external hub or connected to the local hub via
a MAU.
In every hub, one external(2) group will exist. The
very first port in the hub is always the local
hub port, with the remaining ports as the
external ones. Whenever a new external port is
detected, it is added to this group, and a
conNewPort trap is generated indicating the new
port number.
Parsed from file NWHub_TR.mib.txt
Company: cai
Module: Novell-Hub-TokenRing-MIB
Automatically extracted from nwhub.mib
conBasGroupType OBJECT-TYPE SYNTAX INTEGER { physical(1), external(2) } ACCESS read-only STATUS mandatory DESCRIPTION "In Token Ring hubs, the management procedures can detect and report on stations other than those directly connected to the hub via a hub port. A special group, external(2), has been allocated for these ports. The format of the external(2) group is identical to the physical(2) groups in all respects. However, the ports may exist on an external hub or connected to the local hub via a MAU. In every hub, one external(2) group will exist. The very first port in the hub is always the local hub port, with the remaining ports as the external ones. Whenever a new external port is detected, it is added to this group, and a conNewPort trap is generated indicating the new port number." ::= { conBasicGroupEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23.2.12.1.2.1.1 | conBasGroupConID | 0 | 0 | This variable identifies the concentrator containing the group for which this entry contains information. |
| 1.3.6.1.4.1.23.2.12.1.2.1.2 | conBasGroupID | 0 | 0 | This variable identifies the group within the concentrator for which this entry contains information. This value is never greater… |
| 1.3.6.1.4.1.23.2.12.1.2.1.3 | conBasGroupDescr | 0 | 0 | A textual description of the group. This value should include the full name and version identification of the group's hardware ty… |
| 1.3.6.1.4.1.23.2.12.1.2.1.4 | conBasGroupObjectID | 0 | 0 | The vendor's authoritative identification of the group. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1)… |
| 1.3.6.1.4.1.23.2.12.1.2.1.5 | conBasGroupUpTime | 0 | 0 | An object that contains the value of sysUpTime at the time that the management information relating to this group was last reset.… |
| 1.3.6.1.4.1.23.2.12.1.2.1.6 | conBasGroupNumOfPorts | 0 | 0 | The conBasGroupNumOfPorts is the number of ports contained within the group. Valid range is 1- 1024. Within each group, the port… |
| 1.3.6.1.4.1.23.2.12.1.2.1.7 | conBasGroupCableType | 0 | 0 | The conBasGroupCableType defines the type of cable used for connecting the group ports to attached stations. |
| 1.3.6.1.4.1.23.2.12.1.2.1.9 | conBasGroupSlotNo | 0 | 0 | The number of the slot in which the group card resides. A negative value signifies that the slot number is not known. |
| 1.3.6.1.4.1.23.2.12.1.2.1.10 | conBasGroupChassisID | 0 | 0 | The number of the chassis in which the group card resides. A zero value signifies that the chassis number is not known. |