iticlass record.
Parsed from file ne5400-0420.mib.txt
Company: None
Module: Telematics-Nevada-MIB
iticlass record.
Parsed from file Telematics-Nevada-MIB.mib
Module: Telematics-Nevada-MIB
Vendor: Telematics International, Inc.
Module: Telematics-Nevada-MIB
[Automatically extracted from oidview.com]
nvIticlassEntry OBJECT-TYPE SYNTAX NvIticlassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticlass record." INDEX { nvIticlassIndex } ::= { nvIticlassTable 1 }
nvIticlassEntry OBJECT-TYPE SYNTAX NvIticlassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticlass record." INDEX { nvIticlassIndex } ::= { nvIticlassTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.230.5.6.9.3.1.1 | nvIticlassIndex | 0 | 0 | Index of iticlass record |
1.3.6.1.4.1.230.5.6.9.3.1.2 | nvIticlassClassname | 0 | 0 | Class Name (classname) This field contains a user's name. If a default user id is not specified in the PORT record, ITI will ask t… |
1.3.6.1.4.1.230.5.6.9.3.1.3 | nvIticlassAcctsigl | 0 | 0 | Accounting Service Signal (acctsigl) Default value is 2+1. |
1.3.6.1.4.1.230.5.6.9.3.1.4 | nvIticlassActonloss | 0 | 0 | Action on Data Loss (actonloss) Default value is 1+1. |
1.3.6.1.4.1.230.5.6.9.3.1.5 | nvIticlassBannerid | 0 | 0 | Connect Banner Identification (bannerid) This parameter indicates the herald message that is to be send to the port upon activati… |
1.3.6.1.4.1.230.5.6.9.3.1.6 | nvIticlassBreaksgnl | 0 | 0 | BREAK Character Signal Id (breaksgnl) |
1.3.6.1.4.1.230.5.6.9.3.1.7 | nvIticlassCalmethod | 0 | 0 | Allowed Calling Method (calmethod) Parameter to control the restriction of outgoing call methods. Default value is 1+1. |
1.3.6.1.4.1.230.5.6.9.3.1.8 | nvIticlassClasmsgid | 0 | 0 | Class Info Message Id (clasmsgid) This parameter controls the facility that is used to send a greeting message to users successfu… |
1.3.6.1.4.1.230.5.6.9.3.1.9 | nvIticlassClaspaswd | 0 | 0 | Class Password (claspaswd) This field contains the password associated with this user. When a userid and password are prompted for… |
1.3.6.1.4.1.230.5.6.9.3.1.10 | nvIticlassCmdtimout | 0 | 0 | X.28 Command Timeout (cmdtimout) Timeout value (in seconds) when waiting for user to enter a command. If the value is zero,the co… |
1.3.6.1.4.1.230.5.6.9.3.1.11 | nvIticlassCug | 0 | 0 | Closed User Group Identifier (cug) Default value is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.12 | nvIticlassDatacmd | 0 | 0 | Data Command (datacmd) Default value is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.13 | nvIticlassDefwsze | 0 | 0 | Default Window Size (defwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number… |
1.3.6.1.4.1.230.5.6.9.3.1.14 | nvIticlassDefpsze | 0 | 0 | Default Packet Size (defpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual ci… |
1.3.6.1.4.1.230.5.6.9.3.1.15 | nvIticlassDevtype | 0 | 0 | Device Type (devtype) This field is used to control ITI actions depending upon whether the port is connected to a host or terminal… |
1.3.6.1.4.1.230.5.6.9.3.1.16 | nvIticlassExitcmd | 0 | 0 | Exit Command (exitcmd) Default value is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.17 | nvIticlassFastsel | 0 | 0 | Fast Select Calling (fastsel) This field determines whether fast select calls may be placed or received Default value is 4+1. |
1.3.6.1.4.1.230.5.6.9.3.1.18 | nvIticlassIchrg | 0 | 0 | Incoming Charging Restriction (ichrg) This field controls the incoming charging options allowed for this session. Normally used on… |
1.3.6.1.4.1.230.5.6.9.3.1.19 | nvIticlassInactivty | 0 | 0 | Data Mode Inactivity Timeout (inactivty) Timeout value (in minutes) when waiting for data transfer after call has been connected.… |
1.3.6.1.4.1.230.5.6.9.3.1.20 | nvIticlassIncbar | 0 | 0 | Incoming Call Restriction (incbar) This field is used to bar specified incoming calls. Normally used on a host interface. Default … |
1.3.6.1.4.1.230.5.6.9.3.1.21 | nvIticlassInitcmd | 0 | 0 | Initial Automatic Command Id (initcmd) Default value is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.22 | nvIticlassMaskstrng | 0 | 0 | string containing echo mask sequence Default value is 0. string MUST be defined BEFORE it can be referenced in this field. |
1.3.6.1.4.1.230.5.6.9.3.1.23 | nvIticlassMaxpsze | 0 | 0 | Maximum Packet Size (maxpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual ci… |
1.3.6.1.4.1.230.5.6.9.3.1.24 | nvIticlassMaxwsze | 0 | 0 | Maximum Window Size (maxwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number… |
1.3.6.1.4.1.230.5.6.9.3.1.25 | nvIticlassOchrg | 0 | 0 | Outgoing Charging Restriction (ochrg) This field controls the outgoing charging options permitted during this session. Normally us… |
1.3.6.1.4.1.230.5.6.9.3.1.26 | nvIticlassOutbar | 0 | 0 | Outgoing Call Restriction (outbar) This field is used to bar specified outgoing calls. Normally used on a terminal interface. Defa… |
1.3.6.1.4.1.230.5.6.9.3.1.27 | nvIticlassPrefixid | 0 | 0 | Service Signal Prefix Id (prefixid) This parameter indicates the prefix string that is prefixed to all replies from ITI. This valu… |
1.3.6.1.4.1.230.5.6.9.3.1.28 | nvIticlassProfile | 0 | 0 | Initial X.3 Parameter Profile (profile) This field specifies which X.3 parameter profile is to be used for the session. The termi… |
1.3.6.1.4.1.230.5.6.9.3.1.29 | nvIticlassPromptid | 0 | 0 | X.28 Prompt Identification (promptid) This parameter indicates the prompt to be used to solicit a user response. This value is an … |
1.3.6.1.4.1.230.5.6.9.3.1.30 | nvIticlassPvcid | 0 | 0 | PVC Identifier (pvcid) This field is used to select a network provided permanent virtual circuit for the session. |
1.3.6.1.4.1.230.5.6.9.3.1.31 | nvIticlassRejectid | 0 | 0 | Reject Service Message Id (rejectid) This field controls the facility that is used to send a service refusal message to the user … |
1.3.6.1.4.1.230.5.6.9.3.1.32 | nvIticlassRpoacode | 0 | 0 | RPOA Code (rpoacode) Default value is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.33 | nvIticlassRpoatype | 0 | 0 | RPOA Type (rpoatype) Default value is 2+1. |
1.3.6.1.4.1.230.5.6.9.3.1.34 | nvIticlassSecurity | 0 | 0 | Access Method (security) Default value is 1+1. |
1.3.6.1.4.1.230.5.6.9.3.1.35 | nvIticlassTermtype | 0 | 0 | Terminal Type (termtype) Default value is 1+1. |
1.3.6.1.4.1.230.5.6.9.3.1.36 | nvIticlassX28type | 0 | 0 | X.28 Command Set (x28type) Default value is 1+1. |
1.3.6.1.4.1.230.5.6.9.3.1.37 | nvIticlassX3type | 0 | 0 | X.3 Parameter Profile Type (x3type) Many implementations of X.3 may be found in today's public data networks. A parameter on one … |
1.3.6.1.4.1.230.5.6.9.3.1.38 | nvIticlassXoffin | 0 | 0 | Input XOFF Character (xoffin) Second user selectable XOFF charcter. This character functions in an input only capacity and is not… |
1.3.6.1.4.1.230.5.6.9.3.1.39 | nvIticlassXoffout | 0 | 0 | Output XOFF Character (xoffout) User selectable XOFF character. Default value is 19. |
1.3.6.1.4.1.230.5.6.9.3.1.40 | nvIticlassXonin | 0 | 0 | Input XON Character (xonin) Second user selectable XON charcter. This character functions in an input only capacity and is not out… |
1.3.6.1.4.1.230.5.6.9.3.1.41 | nvIticlassXonout | 0 | 0 | Output XON Character (xonout) User selectable XON character. Default value is 17. |
1.3.6.1.4.1.230.5.6.9.3.1.42 | nvIticlassTidprompt | 0 | 0 | None |
1.3.6.1.4.1.230.5.6.9.3.1.43 | nvIticlassStatus | 0 | 0 | Operation status. Add the record to the table (valid) or delete the record from the table (invalid). |
1.3.6.1.4.1.230.5.6.9.3.1.44 | nvIticlassEscchar | 0 | 0 | escape character use default is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.45 | nvIticlassInvclrcmd | 0 | 0 | clear Command (initcmd) Default value is 0. |
1.3.6.1.4.1.230.5.6.9.3.1.46 | nvIticlassX29mskstr | 0 | 0 | None |
1.3.6.1.4.1.230.5.6.9.3.1.47 | nvIticlassDroptimer | 0 | 0 | length of time before disconnecting a call default 0 |
1.3.6.1.4.1.230.5.6.9.3.1.48 | nvIticlassClasmode | 0 | 0 | Padding. |
1.3.6.1.4.1.230.5.6.9.3.1.49 | nvIticlassDialout | 0 | 0 | dial-out string |
1.3.6.1.4.1.230.5.6.9.3.1.50 | nvIticlassCallingid | 0 | 0 | What to do with call id. |
1.3.6.1.4.1.230.5.6.9.3.1.51 | nvIticlassAcctng | 0 | 0 | Accounting |
1.3.6.1.4.1.230.5.6.9.3.1.52 | nvIticlassInvclrtim | 0 | 0 | Timeout for Invitation to Clear |
1.3.6.1.4.1.230.5.6.9.3.1.53 | nvIticlassComfac | 0 | 0 | Lower or Upper case service signals. lcfac = lower case with fac ucfac = upper case with fac lcnofac = lower case with no fac ucnof… |