Vendor: Fujitsu Siemens Computers
Module: BCAM-MIB
[Automatically extracted from oidview.com]
bcamGlobal OBJECT IDENTIFIER ::= { sniBcam 2 }
bcamGlobal OBJECT IDENTIFIER ::= { sniBcam 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231.2.17.2.1 | bcamGlobalBcamVersion | 1 | 1 | The version of BCAM in the form xx.yy xx: mainversion yy: subversion |
| 1.3.6.1.4.1.231.2.17.2.2 | bcamGlobalMibVersion | 1 | 1 | Version of BCAM specific MIB (beginning with 1). Will be increased with every enhancement of this MIB |
| 1.3.6.1.4.1.231.2.17.2.3 | bcamGlobalUpTime | 1 | 1 | Time in seconds since start of BCAM |
| 1.3.6.1.4.1.231.2.17.2.4 | bcamGlobalPortNonpriv | 1 | 1 | The lowest port number that may be used by non privileged applications |
| 1.3.6.1.4.1.231.2.17.2.5 | bcamGlobalPortFree | 1 | 1 | The lowest port number that will be assigned dynamical by BCAM |
| 1.3.6.1.4.1.231.2.17.2.6 | bcamGlobalNumBitmap | 1 | 1 | The number of bitmaps to administer slots in the data slot pool. Every bitmap can administer 2048 slots. So the maximum number of… |
| 1.3.6.1.4.1.231.2.17.2.7 | bcamGlobalMaxRemoteIp | 1 | 1 | The maximum length in bytes BCAM uses for an NSDU for an endsystem that is reached over at least one router |
| 1.3.6.1.4.1.231.2.17.2.8 | bcamGlobalEsCreationIp | 1 | 1 | The types of IP protocols that will lead to automatic endsystem creation: ipOff (1) : no automatic endsystem creation d… |
| 1.3.6.1.4.1.231.2.17.2.9 | bcamGlobalEsCreationIso | 1 | 1 | The types of ISO 8473 and ISO 9542 protocols that will lead to automatic endsystem creation: isoOff (1) : no automatic … |
| 1.3.6.1.4.1.231.2.17.2.10 | bcamGlobalBroadcast | 1 | 1 | Describes how incoming broadcasts will be treated. on (2) : broadcasts will be evaluated and answered if necessary. off (1) : br… |
| 1.3.6.1.4.1.231.2.17.2.11 | bcamGlobalArp | 1 | 1 | Describes if the address resolution protocol is used. off (1) : no ARP will be used. quiet (2) : ARP will be used the first tim… |
| 1.3.6.1.4.1.231.2.17.2.12 | bcamGlobalRarp | 1 | 1 | Describes if the reverse address resolution protocol will be supported. off (1) : RARP not supported. on (2) : RARP supported. |
| 1.3.6.1.4.1.231.2.17.2.13 | bcamGlobalInWaitLimit1 | 1 | 1 | The lowest bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval betw… |
| 1.3.6.1.4.1.231.2.17.2.14 | bcamGlobalInWaitLimit2 | 1 | 1 | The second bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval betw… |
| 1.3.6.1.4.1.231.2.17.2.15 | bcamGlobalInWaitLimit3 | 1 | 1 | The third bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval betwe… |
| 1.3.6.1.4.1.231.2.17.2.16 | bcamGlobalInWaitLimit4 | 1 | 1 | The highest bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval bet… |
| 1.3.6.1.4.1.231.2.17.2.17 | bcamGlobalInWaitChange | 1 | 1 | The number of times the limits of the input wait time buckets have been changed. |
| 1.3.6.1.4.1.231.2.17.2.18 | bcamGlobalInWaitSet | 1 | 1 | The state of counting into the input wait time buckets. off (2) : the counting is stopped. on (1) : the counting is running. |
| 1.3.6.1.4.1.231.2.17.2.19 | bcamGlobalReactLimit1 | 1 | 1 | The lowest bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is th… |
| 1.3.6.1.4.1.231.2.17.2.20 | bcamGlobalReactLimit2 | 1 | 1 | The second bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is th… |
| 1.3.6.1.4.1.231.2.17.2.21 | bcamGlobalReactLimit3 | 1 | 1 | The third bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is the… |
| 1.3.6.1.4.1.231.2.17.2.22 | bcamGlobalReactLimit4 | 1 | 1 | The highest bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is t… |
| 1.3.6.1.4.1.231.2.17.2.23 | bcamGlobalReactChange | 1 | 1 | The number of times the limits of the application reaction time buckets have been changed. |
| 1.3.6.1.4.1.231.2.17.2.24 | bcamGlobalReactSet | 1 | 1 | The state of counting into the application reaction time buckets. off (2) : the counting is stopped. on (1) : the counting is ru… |
| 1.3.6.1.4.1.231.2.17.2.25 | bcamGlobalInProcLimit1 | 1 | 1 | The lowest bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the ti… |
| 1.3.6.1.4.1.231.2.17.2.26 | bcamGlobalInProcLimit2 | 1 | 1 | The second bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the ti… |
| 1.3.6.1.4.1.231.2.17.2.27 | bcamGlobalInProcLimit3 | 1 | 1 | The third bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the tim… |
| 1.3.6.1.4.1.231.2.17.2.28 | bcamGlobalInProcLimit4 | 1 | 1 | The highest bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the t… |
| 1.3.6.1.4.1.231.2.17.2.29 | bcamGlobalInProcChange | 1 | 1 | The number of times the limits of the inbound processing time buckets have been changed. |
| 1.3.6.1.4.1.231.2.17.2.30 | bcamGlobalInProcSet | 1 | 1 | The state of counting into the inbound processing time buckets. off (2) : the counting is stopped. on (1) : the counting is runn… |
| 1.3.6.1.4.1.231.2.17.2.31 | bcamGlobalOutProcLimit1 | 1 | 1 | The lowest bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the … |
| 1.3.6.1.4.1.231.2.17.2.32 | bcamGlobalOutProcLimit2 | 1 | 1 | The second bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the … |
| 1.3.6.1.4.1.231.2.17.2.33 | bcamGlobalOutProcLimit3 | 1 | 1 | The third bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the t… |
| 1.3.6.1.4.1.231.2.17.2.34 | bcamGlobalOutProcLimit4 | 1 | 1 | The highest bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the… |
| 1.3.6.1.4.1.231.2.17.2.35 | bcamGlobalOutProcChange | 1 | 1 | The number of times the limits of the outbound processing time buckets have been changed. |
| 1.3.6.1.4.1.231.2.17.2.36 | bcamGlobalOutProcSet | 1 | 1 | The state of counting into the outbound processing time buckets. off (2) : the counting is stopped. on (1) : the counting is run… |
| 1.3.6.1.4.1.231.2.17.2.37 | bcamGlobalSnmpRelease | 1 | 1 | The time interval in minutes for which the values for already closed connections and applications are still available. |
| 1.3.6.1.4.1.231.2.17.2.38 | bcamGlobalTrapPollInterval | 1 | 1 | The time interval in seconds after which the SNMP agent will poll for traps. |
| 1.3.6.1.4.1.231.2.17.2.39 | bcamGlobalFileApplTable | 1 | 1 | The name of the file that contains the assignments of NEA or ISO applications to the virtual host on which they shall run. |
| 1.3.6.1.4.1.231.2.17.2.40 | bcamGlobalFileSocketHostTable | 1 | 1 | The name of the file that contains the assignments of IP adresses to socket host names for automatic created endsystems. |
| 1.3.6.1.4.1.231.2.17.2.41 | bcamGlobalFileProcTable | 1 | 1 | The name of the file that contains the assignments of host names to net addresses for automatic created endsystems. |
| 1.3.6.1.4.1.231.2.17.2.42 | bcamGlobalAccessProcTable | 1 | 1 | The access of the file named in bcamGlobalFileProcTable: read (1) : only endsystems contained in the file will be created by a… |
| 1.3.6.1.4.1.231.2.17.2.43 | bcamGlobalHostName | 1 | 1 | NEA name of the local endsystem |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231.2.17.1 | bcamTrap | 5 | 10 | None |
| 1.3.6.1.4.1.231.2.17.3 | bcamMemory | 57 | 114 | None |
| 1.3.6.1.4.1.231.2.17.4 | bcamTrace | 34 | 68 | None |
| 1.3.6.1.4.1.231.2.17.5 | bcamTsap | 22 | 104 | None |
| 1.3.6.1.4.1.231.2.17.6 | bcamCep | 10 | 86 | None |
| 1.3.6.1.4.1.231.2.17.7 | bcamRoute | 10 | 103 | None |
| 1.3.6.1.4.1.231.2.17.8 | bcamIf | 2 | 95 | None |
| 1.3.6.1.4.1.231.2.17.9 | bcamRouter | 2 | 9 | None |
| 1.3.6.1.4.1.231.2.17.10 | bcamHost | 2 | 9 | None |
| 1.3.6.1.4.1.231.2.17.301 | bcamTrapOutPoolOver | 0 | 0 | None |
| 1.3.6.1.4.1.231.2.17.302 | bcamTrapOutPoolUnder | 0 | 0 | None |
| 1.3.6.1.4.1.231.2.17.303 | bcamTrapInPoolOver | 0 | 0 | None |
| 1.3.6.1.4.1.231.2.17.304 | bcamTrapInPoolUnder | 0 | 0 | None |
| 1.3.6.1.4.1.231.2.17.305 | bcamTrapLinkUp | 0 | 0 | None |
| 1.3.6.1.4.1.231.2.17.306 | bcamTrapLinkDown | 0 | 0 | None |
| 1.3.6.1.4.1.231.2.17.307 | bcamTrapSystemUp | 0 | 0 | None |