An entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry.
Parsed from file xldv20.mib.txt
Company: None
Module: XLDV20-MIB
An entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry.
Parsed from file XLDV20-MIB.mib
Module: XLDV20-MIB
Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20SdcPPTPEntry OBJECT-TYPE SYNTAX Xldv20SdcPPTPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry. " INDEX { xldv20IfIndex } ::= { xldv20SdcPPTPTable 1 }
xldv20SdcPPTPEntry OBJECT-TYPE SYNTAX Xldv20SdcPPTPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry. " INDEX { xldv20IfIndex } ::= { xldv20SdcPPTPTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.1 | xldv20SdcRateCfg | 0 | 0 | The desired data rate. The data rate ranges from 160 to 2320 Kbit/sec. The cell rate ranges between 377 and 5471 cells/sec. Defaul… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.2 | xldv20SdcXdslServiceTypeCfg | 0 | 0 | The configured service mode for SDSL line. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.3 | xldv20SdcRate | 0 | 0 | The current downstream data rate. The data rate ranges from 160 to 2320 Kbit/sec. The cell rate ranges between 377 and 5471 cells… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.4 | xldv20SdcMarginDn | 0 | 0 | Not applicable. GetRequest returns marginNotApplicable . |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.5 | xldv20SdcMarginUp | 0 | 0 | The current upstream margin in units of dB. Default is marginInvalid . |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.6 | xldv20SdcAttenuationDn | 0 | 0 | Not applicable. GetRequest returns attenuationNotApplicable. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.7 | xldv20SdcAttenuationUp | 0 | 0 | The current upstream attenuation in steps of 0,5 dB. Default is attenuationInvalid. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.8 | xldv20SdcLinkState | 0 | 0 | The link states of the SDSL Central Office Modem. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.9 | xldv20SdcAISOnLOS | 0 | 0 | The attribute enables or disables the VP-AIS generation after defect LOS. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.10 | xldv20SdcAISOnACT | 0 | 0 | The attribute enables or disables the VP-AIS generation after link activation fault. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.11 | xldv20SdcGuaranteedBandwidthUsage | 0 | 0 | The guaranteed bandwidth in percent. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.12 | xldv20SdcInitStatus | 0 | 0 | The initialization status field of an SDSL line. Describes the initalization error in case of an activation problem on an SDSL li… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.13 | xldv20SdcMinMarginUpCfg | 0 | 0 | The desired threshold for upstream margin when an alarm should be sent (in units of dB). |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.14 | xldv20SdcTransceiverOutputPower | 0 | 0 | The SDSL tranceiver output power. Granularity 1.0 dBm. Default value is outputPowerInvalid. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.15 | xldv20SdcXdslServiceType | 0 | 0 | The current service type resulting from the configured service type. It depends on the actual hardware. Configuring gDotHsMode ca… |