wvUpdateTerminalConfiguration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
DESCRIPTION
"Initializes a configuration update process from the manager to either the Active or one of the Saved Configurations on the terminal.
The actual updated configuration is specified through the community in the request, as explained below on the wvCommunityTable Description.
If the Update is to one of the Saved Configurations then it is saved on non-volatile memory.
If the Update is to the Active Configuration then the changed parameters are activated.
The value given with the object is not relevant and it's not checked."
View at oid-info.com
Initializes a configuration update process from the manager to either the
Active or one of the Saved Configurations on the terminal.
The actual updated configuration is specified through the community in the request,
as explained below on the wvCommunityTable Description.
If the Update is to one of the Saved Configurations then it is saved on
non-volatile memory.
If the Update is to the Active Configuration then the changed parameters are
activated.
The value given with the object is not relevant and it's not checked.
Parsed from file 8800-DMR.txt
Company: None
Module: CODAN-MIB
Initializes a configuration update process from the manager to either the
Active or one of the Saved Configurations on the terminal.
The actual updated configuration is specified through the community in the request,
as explained below on the wvCommunityTable Description.
If the Update is to one of the Saved Configurations then it is saved on
non-volatile memory.
If the Update is to the Active Configuration then the changed parameters are
activated.
The value given with the object is not relevant and it's not checked.
Parsed from file CODAN-MIB.mib
Module: CODAN-MIB
wvUpdateTerminalConfiguration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Initializes a configuration update process from the manager to either the Active or one of the Saved Configurations on the terminal. The actual updated configuration is specified through the community in the request, as explained below on the wvCommunityTable Description. If the Update is to one of the Saved Configurations then it is saved on non-volatile memory. If the Update is to the Active Configuration then the changed parameters are activated. The value given with the object is not relevant and it's not checked." ::= { wvManagement 2 }
wvUpdateTerminalConfiguration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Initializes a configuration update process from the manager to either the Active or one of the Saved Configurations on the terminal. The actual updated configuration is specified through the community in the request, as explained below on the wvCommunityTable Description. If the Update is to one of the Saved Configurations then it is saved on non-volatile memory. If the Update is to the Active Configuration then the changed parameters are activated. The value given with the object is not relevant and it's not checked." ::= { wvManagement 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1.1.3.2.0 | wvUpdateTerminalConfiguration | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1.1.3.3 | wvActivateTerminalConfiguration | 1 | 1 | Initializes a configuration transfer process on the terminal from one of the Saved Configurations to the Active Configuration, a… |
| 1.3.6.1.4.1.23304.1.1.1.3.4 | wvResetTerminal | 1 | 1 | Activates a cold/warm reset at the terminal. A cold reset is performed at both the IDU and the ODU and stops all communications w… |
| 1.3.6.1.4.1.23304.1.1.1.3.5 | wvActivateTerminalConfigurationTime | 1 | 1 | Defines the time, relative to sysUpTime, when the wvActivateTerminalConfiguration request should be performed. If when set this v… |
| 1.3.6.1.4.1.23304.1.1.1.3.6 | wvSavedActiveConfiguration | 1 | 1 | Specifies which of the Saved Configurations currently reflects the Active Configuration. It is set to 'none' following a successf… |
| 1.3.6.1.4.1.23304.1.1.1.3.7 | wvOnePlusOneRequestSwitchOut | 1 | 1 | For 1+1 systems only: Simulates a 'Switch-Out' request on the current unit. If not a 1+1 system, the request is rejected. The valu… |
| 1.3.6.1.4.1.23304.1.1.1.3.10 | wvFrontPanelUserPassword | 1 | 1 | Specifies the Password for User privilege Front Panel access. |
| 1.3.6.1.4.1.23304.1.1.1.3.11 | wvFrontPanelAdminPassword | 1 | 1 | Specifies the Password for Admin privilege Front Panel access. |
| 1.3.6.1.4.1.23304.1.1.1.3.12 | wvFrontPanelSupervisorPassword | 1 | 1 | Specifies the Password for Supervisor privilege Front Panel access. |
| 1.3.6.1.4.1.23304.1.1.1.3.15 | wvResetOdu | 1 | 1 | Activates an ODU only cold reset. This will cause the link to be restarted. A cold switch-over reset, in addition to performing a… |
| 1.3.6.1.4.1.23304.1.1.1.3.20 | wvSlipInIPAddress | 1 | 1 | The terminals' Slip-In IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.21 | wvSlipInIPSubnetMask | 1 | 1 | The subnet mask associated with wvSlipInIPAddress. The value of the mask is an IP address with all the network bits set to 1 and … |
| 1.3.6.1.4.1.23304.1.1.1.3.22 | wvSlipOutIPAddress | 1 | 1 | The terminals' Slip-Out IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.23 | wvSlipOutIPSubnetMask | 1 | 1 | The subnet mask associated with wvSlipOutIPAddress. The value of the mask is an IP address with all the network bits set to 1 and… |
| 1.3.6.1.4.1.23304.1.1.1.3.24 | wvLanIPAddress | 1 | 1 | The terminals' LAN IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.25 | wvLanIPSubnetMask | 1 | 1 | The subnet mask associated with wvLanIPAddress. The value of the mask is an IP address with all the network bits set to 1 and al… |
| 1.3.6.1.4.1.23304.1.1.1.3.26 | wvLinkIPAddress | 1 | 1 | The terminals' link IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.27 | wvLinkIPSubnetMask | 1 | 1 | The subnet mask associated with wvLinkIPAddress. The value of the mask is an IP address with all the network bits set to 1 and a… |
| 1.3.6.1.4.1.23304.1.1.1.3.28 | wvEth10-100ManIPAddress | 1 | 1 | The terminals' ETH 10/100 IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.29 | wvEth10-100ManIPSubnetMask | 1 | 1 | The subnet mask associated with wvEth10-100ManIPAddress. The value of the mask is an IP address with all the network bits set to… |
| 1.3.6.1.4.1.23304.1.1.1.3.30 | wvPeerSlipInIPAddress | 1 | 1 | The peer terminals' Slip-In IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.31 | wvPeerSlipInIPSubnetMask | 1 | 1 | The subnet mask associated with wvPeerSlipInIPAddress. The value of the mask is an IP address with all the network bits set to 1 … |
| 1.3.6.1.4.1.23304.1.1.1.3.32 | wvPeerSlipOutIPAddress | 1 | 1 | The peer terminals' Slip-Out IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.33 | wvPeerSlipOutIPSubnetMask | 1 | 1 | The subnet mask associated with wvPeerSlipOutIPAddress. The value of the mask is an IP address with all the network bits set to 1… |
| 1.3.6.1.4.1.23304.1.1.1.3.34 | wvPeerLanIPAddress | 1 | 1 | The peer terminals' LAN IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.35 | wvPeerLanIPSubnetMask | 1 | 1 | The subnet mask associated with wvPeerLanIPAddress. The value of the mask is an IP address with all the network bits set to 1 an… |
| 1.3.6.1.4.1.23304.1.1.1.3.36 | wvPeerLinkIPAddress | 1 | 1 | The peer terminals' link IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.37 | wvPeerLinkIPSubnetMask | 1 | 1 | The subnet mask associated with wvPeerLinkIPAddress. The value of the mask is an IP address with all the network bits set to 1 a… |
| 1.3.6.1.4.1.23304.1.1.1.3.38 | wvPeerEth10-100ManIPAddress | 1 | 1 | The peer terminals' ETH 10/100 IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.39 | wvPeerEth10-100ManIPSubnetMask | 1 | 1 | The subnet mask associated with wvPeerEth10-100ManIPAddress. The value of the mask is an IP address with all the network bits se… |
| 1.3.6.1.4.1.23304.1.1.1.3.40 | wvSlipInDestIPAddress | 1 | 1 | The IP address of the destination connected to the Slip-In port. |
| 1.3.6.1.4.1.23304.1.1.1.3.41 | wvSlipInDestIPSubnetMask | 1 | 1 | The subnet mask associated with wvSlipInDestIPAddress. The value of the mask is an IP address with all the network bits set to 1 … |
| 1.3.6.1.4.1.23304.1.1.1.3.42 | wvSlipOutDestIPAddress | 1 | 1 | The IP address of the destination connected to the Slip-Out port. |
| 1.3.6.1.4.1.23304.1.1.1.3.43 | wvSlipOutDestIPSubnetMask | 1 | 1 | The subnet mask associated with wvSlipOutDestIPAddress. The value of the mask is an IP address with all the network bits set to 1… |
| 1.3.6.1.4.1.23304.1.1.1.3.44 | wvOnePlusOneCompanionLinkIPAddress | 1 | 1 | The companion terminals' link IP address. VAlid only if system is a '1+1', according to wvOnePlusOneStatus. |
| 1.3.6.1.4.1.23304.1.1.1.3.45 | wvOnePlusOneCompanionEthIPAddress | 1 | 1 | The Companion Eth(LAN)IP address in '1+1' system. |
| 1.3.6.1.4.1.23304.1.1.1.3.50 | wvUserRoutesManagement | 2 | 10 | None |
| 1.3.6.1.4.1.23304.1.1.1.3.100 | wvSetOperationId | 1 | 1 | This object identifies the current successful invocation of the set operation. |
| 1.3.6.1.4.1.23304.1.1.1.3.101 | wvSetOperationCtrl | 1 | 1 | This object synchronizes between several cooperating manager stations, to coordinate their use of the set operation. If it is set… |
| 1.3.6.1.4.1.23304.1.1.1.3.102 | wvSetOperationOwner | 1 | 1 | The entity which currently has the 'ownership' required to perform set operations. |
| 1.3.6.1.4.1.23304.1.1.1.3.103 | wvConfigurationChangedStatus | 1 | 1 | A bit is set for a family by the agent to indicate that a configuration parameter in the corresponding family has been changed. I… |
| 1.3.6.1.4.1.23304.1.1.1.3.110 | wvCommunityTable | 1 | 4 | A table of SNMP community settings. |
| 1.3.6.1.4.1.23304.1.1.1.3.111 | wvTrapRecipientsTable | 1 | 3 | A table of SNMP trap managers IP addresses. |
| 1.3.6.1.4.1.23304.1.1.1.3.200 | wvTftpServerIpAddress | 1 | 1 | Defines the IP Address of the TFTP server. |
| 1.3.6.1.4.1.23304.1.1.1.3.201 | wvTftpOperationCtrl | 1 | 1 | When disabled no TFTP can be performed. This allows a high privilege authority to disallow lower privilege managers to initialize… |
| 1.3.6.1.4.1.23304.1.1.1.3.202 | wvTftpNoOfRetries | 1 | 1 | Determines the no. of retries to be performed by the terminal upon TFTP failures. A value of 0 means to try forever until succes… |
| 1.3.6.1.4.1.23304.1.1.1.3.203 | wvTftpFileName | 1 | 1 | Defines the full name of the file to be TFTP'ed. |
| 1.3.6.1.4.1.23304.1.1.1.3.204 | wvTftpStartTime | 1 | 1 | Defines the desired delay time, in time-ticks, before the TFTP is started. When TFTP is on, either on delay or started, setting … |
| 1.3.6.1.4.1.23304.1.1.1.3.205 | wvTftpRemainingStartTime | 1 | 1 | Defines the ongoing remaining time before the TFTP starts. |
| 1.3.6.1.4.1.23304.1.1.1.3.210 | wvSwModuleTable | 1 | 7 | The Terminal Software Modules table. |
| 1.3.6.1.4.1.23304.1.1.1.3.215 | wvResetPerformance | 1 | 1 | When setting to 'on' it will Reset the Performance parameters. Reading this object will return allways 'off'. |