wvIduSerialNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
DESCRIPTION
"The serial number of IDU."
View at oid-info.com
The serial number of IDU.
Parsed from file 8800-DMR.txt
Company: None
Module: CODAN-MIB
The serial number of IDU.
Parsed from file CODAN-MIB.mib
Module: CODAN-MIB
wvIduSerialNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of IDU." ::= { wvStatusAndGauges 25 }
wvIduSerialNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of IDU." ::= { wvStatusAndGauges 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1.2.25.0 | wvIduSerialNumber | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1.2.1 | wvTelemetryStatus | 1 | 1 | Keeps the status of the Idu-Odu communication. |
| 1.3.6.1.4.1.23304.1.1.2.2 | wvOperatingSystemStatus | 1 | 1 | Keeps the state of the system from the firmware point-of-view. |
| 1.3.6.1.4.1.23304.1.1.2.3 | wvIduOduCableStatus | 1 | 1 | Keeps the current status of the Idu-Odu cable. |
| 1.3.6.1.4.1.23304.1.1.2.4 | wvIduStatus | 1 | 1 | Reports the current status of the IDU. |
| 1.3.6.1.4.1.23304.1.1.2.5 | wvOduStatus | 1 | 1 | Reports the current status of the ODU. |
| 1.3.6.1.4.1.23304.1.1.2.6 | wvRemoteTerminalStatus | 1 | 1 | Reports the general current status of the remote terminal. |
| 1.3.6.1.4.1.23304.1.1.2.7 | wvSlipModemStatus | 1 | 1 | Keeps the modem current status. |
| 1.3.6.1.4.1.23304.1.1.2.8 | wvSecurityStatus | 1 | 1 | Reports the current security status. |
| 1.3.6.1.4.1.23304.1.1.2.9 | wvTftpDwnlStatus | 1 | 1 | Describes the status of last TFTP operation. If no TFTP has been performed its status is dwnlStatusUnknown. |
| 1.3.6.1.4.1.23304.1.1.2.10 | wvLinkPerformanceAlarmsStatus | 1 | 1 | Reports the status of link performance related alarms. |
| 1.3.6.1.4.1.23304.1.1.2.11 | wvOperatingFrequency | 1 | 1 | Specifies the current Spectrum Range Allocation x 100, in Mhz (3800000, 2300000, 1800000, etc...) The value is extracted from the… |
| 1.3.6.1.4.1.23304.1.1.2.12 | wvFrequencyBand | 1 | 1 | Specifies the current frequency band, as read from preset jumpers at the ODU. The value read should be compatible with the peer's… |
| 1.3.6.1.4.1.23304.1.1.2.13 | wvChannelSpacing | 1 | 1 | Specifies the frequency spacing between adjacent channels, as a function of the ODU standard (American vs. European) and chosen … |
| 1.3.6.1.4.1.23304.1.1.2.14 | wvTxPowerLevel | 1 | 1 | The transmit power value read at this terminal's ODU output. |
| 1.3.6.1.4.1.23304.1.1.2.15 | wvRxSignalLevel | 1 | 1 | The receive signal value read on this terminal. |
| 1.3.6.1.4.1.23304.1.1.2.16 | wvFadeMargin | 1 | 1 | The margin on the receive signal level, as a function of the Automatic Gain Control read( min(wvRxSignalLevel) - wvRxSignalLevel… |
| 1.3.6.1.4.1.23304.1.1.2.17 | wvOduTemperature | 1 | 1 | The measured ODU temperature. The units and possible values depend on the ODU model. The shown range is American Fahreneit. The Eu… |
| 1.3.6.1.4.1.23304.1.1.2.18 | wvLedState | 1 | 1 | The current state of the IDU LEDs. |
| 1.3.6.1.4.1.23304.1.1.2.19 | wvModemAfc | 1 | 1 | The measured Modem Automatic Frequency Control. This is an implementation specific value, mainly for diagnostic purposes. |
| 1.3.6.1.4.1.23304.1.1.2.20 | wvRxPllFrequency | 1 | 1 | The measured Receive Pll Frequency. This is an implementation specific value, mainly for diagnostic purposes. |
| 1.3.6.1.4.1.23304.1.1.2.21 | wvWorkingFrequency | 1 | 1 | Specifies the actual working frequency x 100, in Mhz (3897875, 2122550, 1873875, etc...) The value depends on the chosen wvChanne… |
| 1.3.6.1.4.1.23304.1.1.2.22 | wvMaxTxPowerSetting | 1 | 1 | This value present the maximum Tx power that can be achieved by the system (this parameter is the maximum value that the user ca… |
| 1.3.6.1.4.1.23304.1.1.2.23 | wvMinTxPowerSetting | 1 | 1 | This value present the minimum Tx power that can be achieved by the system (this parameter is the minimum value that the user ca… |
| 1.3.6.1.4.1.23304.1.1.2.24 | wvOduSerialNumber | 1 | 1 | The serial number of ODU. |
| 1.3.6.1.4.1.23304.1.1.2.30 | wvOnePlusOneStatus | 1 | 1 | Reports the current status of various 1+1 related signals and s/w detected conditions. |
| 1.3.6.1.4.1.23304.1.1.2.31 | wvSupport2T1and2E1Status | 1 | 1 | Reports the current status of support 2T1 and 2E1 capacity. |
| 1.3.6.1.4.1.23304.1.1.2.32 | wvLastUpdateConfigurationTimestamp | 1 | 1 | The Last Update Configuration Timestamp in system ticks |
| 1.3.6.1.4.1.23304.1.1.2.33 | wvOemIduSerialNumber | 1 | 1 | The IDU serial number for OEM manufacture. |
| 1.3.6.1.4.1.23304.1.1.2.34 | wvOemOduSerialNumber | 1 | 1 | The ODU serial number for OEM manufacture. |
| 1.3.6.1.4.1.23304.1.1.2.35 | wvOnePlusOneConnectorType | 1 | 1 | Reports the current connector type that connected to the plug-in's in the new 1+1 system. |
| 1.3.6.1.4.1.23304.1.1.2.40 | wvLog | 2 | 8 | None |