Status of the hot standby feature. A status of not-configured(1) means that
hot standby is not configured for this PacketShaper. active(2) means it is processing
traffic according to its shaping mode. passive(3) means it is not processing traffic
but is monitoring the active partner of the paired PacketShapers. down(4) means it
has declared itself ineligible for active mode due to a self-detected fault.
Parsed from file packeteer.mib.txt
Company: None
Module: PACKETEER-MIB
Status of the standby feature. A status of not-configured(1) means that
standby is not configured for this PacketShaper. active(2) means hot standby is
processing traffic according to its shaping mode. passive(3) means hot standby
is not processing traffic but is monitoring the active partner of the paired
PacketShapers. down(4) means hot standby has declared itself ineligible for
active mode due to a self-detected fault. direct(5) means standby direct is
processing and copying traffic to its partner. disconnected(6) means standby
direct is non-functional since it cannot reach its partner. leak(7) means the
Packetshaper has detected a loop in the network and so has disabled the stanby
direct functionality and is only processing traffic flowing through it. disable(8)
means that the standby direct feature has been disabled and is non-functional.
Parsed from file PACKETEER-MIB.mib
Module: PACKETEER-MIB
Vendor: Packeteer Inc.
Module: PACKETEER-MIB
[Automatically extracted from oidview.com]
psAlarmStandbyStatus OBJECT-TYPE SYNTAX INTEGER { not-configured(1), active(2), passive(3), down(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the hot standby feature. A status of not-configured(1) means that hot standby is not configured for this PacketShaper. active(2) means it is processing traffic according to its shaping mode. passive(3) means it is not processing traffic but is monitoring the active partner of the paired PacketShapers. down(4) means it has declared itself ineligible for active mode due to a self-detected fault." ::= { psAlarms 20 }
psAlarmStandbyStatus OBJECT-TYPE SYNTAX INTEGER { not-configured(1), active(2), passive(3), down(4), direct(5), disconnected(6), leak(7), disable(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the standby feature. A status of not-configured(1) means that standby is not configured for this PacketShaper. active(2) means hot standby is processing traffic according to its shaping mode. passive(3) means hot standby is not processing traffic but is monitoring the active partner of the paired PacketShapers. down(4) means hot standby has declared itself ineligible for active mode due to a self-detected fault. direct(5) means standby direct is processing and copying traffic to its partner. disconnected(6) means standby direct is non-functional since it cannot reach its partner. leak(7) means the Packetshaper has detected a loop in the network and so has disabled the stanby direct functionality and is only processing traffic flowing through it. disable(8) means that the standby direct feature has been disabled and is non-functional." ::= { psAlarms 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2334.2.1.5.20.0 | psAlarmStandbyStatus | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2334.2.1.5.1 | psAlarmInsideLinkCount | 1 | 1 | The number of MIB-II LinkDown traps sent by the agent since the last reset, where ifIndex was for the Inside link. |
1.3.6.1.4.1.2334.2.1.5.3 | psAlarmOutsideLinkCount | 1 | 1 | The number of MIB-II LinkDown traps sent by the agent since the last reset, where ifIndex was for the Outside link. |
1.3.6.1.4.1.2334.2.1.5.5 | psAlarmSiteRouterCount | 1 | 1 | The number of psAlarmSiteRouter traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.6 | psAlarmSiteRouterStatus | 1 | 1 | Status of the site router. A status of gone(2) means that PacketShaper has stopped getting arp replies from the router. error-… |
1.3.6.1.4.1.2334.2.1.5.7 | psAlarmPowerSystemOneCount | 1 | 1 | The number of psAlarmPowerSystemOne traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.8 | psAlarmPowerSystemOneStatus | 1 | 1 | The operational status of the first power system of the device. (1) UP (2) DOWN |
1.3.6.1.4.1.2334.2.1.5.9 | psAlarmPowerSystemTwoCount | 1 | 1 | The number of psAlarmPowerSystemTwo traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.10 | psAlarmPowerSystemTwoStatus | 1 | 1 | The operational status of the second power supply of the device. (1) UP (2) DOWN |
1.3.6.1.4.1.2334.2.1.5.11 | psAlarmFanOneCount | 1 | 1 | The number of psAlarmFanOne traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.12 | psAlarmFanOneStatus | 1 | 1 | The operational status of the first fan of the device. (1) UP (2) DOWN |
1.3.6.1.4.1.2334.2.1.5.13 | psAlarmFanTwoCount | 1 | 1 | The number of psAlarmFanTwo traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.14 | psAlarmFanTwoStatus | 1 | 1 | The operational status of the second fan of the device. (1) UP (2) DOWN |
1.3.6.1.4.1.2334.2.1.5.15 | psAlarmCfgFileCount | 1 | 1 | The number of psAlarmCfgFile traps sent by the agent since the last reset. This variable is obsolete and should not be used. |
1.3.6.1.4.1.2334.2.1.5.16 | psAlarmCfgFileStatus | 1 | 1 | Whether the configuration file has been corrupted. A value of valid(1) signifies no problems, corrupted(2) that the configuratio… |
1.3.6.1.4.1.2334.2.1.5.17 | psAlarmMeasurementEngineCount | 1 | 1 | The number of psAlarmMeasurementEngine traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.18 | psAlarmMeasurementEngineStatus | 1 | 1 | The current status of the Measurement Engine. The values enumerated above correspond to those shown in the command line 'me show… |
1.3.6.1.4.1.2334.2.1.5.19 | psAlarmStandbyCount | 1 | 1 | The number of psAlarmStandby traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.21 | psAlarmFanThreeCount | 1 | 1 | The number of psAlarmFanThree traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.22 | psAlarmFanThreeStatus | 1 | 1 | The operational status of the 3rd fan of the device. (0) Not existant (1) UP (2) DOWN |
1.3.6.1.4.1.2334.2.1.5.23 | psAlarmFanFourCount | 1 | 1 | The number of psAlarmFanFour traps sent by the agent since the last reset. |
1.3.6.1.4.1.2334.2.1.5.24 | psAlarmFanFourStatus | 1 | 1 | The operational status of the 4th fan of the device. (0) Not existant (1) UP (2) DOWN |