This object is the number of octets contained in
valid frames that have been received on this port.
This counter is incremented by OctetCount for each
frame received on this port which has been
determined to be a readable frame (i.e., including
FCS octets but excluding framing bits and dribble
bits).
A discontinuity may occur in the value
when the value of object
rptrMonitorPortLastChange changes.
This statistic provides an indicator of the total
data transferred. The approximate minimum time
for rollover of this counter in a 10Mb/s repeater
is 58 minutes.
For ports receiving traffic at a maximum rate in
a 100Mb/s repeater, this counter can roll over
in less than 6 minutes. Since that amount of time
could be less than a management station's poll cycle
time, in order to avoid a loss of information a
management station is advised to also poll the
rptrMonitorPortUpper32Octets object, or to use the
64-bit counter defined by
rptrMonitorPortHCReadableOctets instead of the
two 32-bit counters.
Parsed from file repeater_private.mib.txt
Company: None
Module: VERTICAL-SNMP-REPEATER-MIB
This object is the number of octets contained in
valid frames that have been received on this port.
This counter is incremented by OctetCount for each
frame received on this port which has been
determined to be a readable frame (i.e., including
FCS octets but excluding framing bits and dribble
bits).
A discontinuity may occur in the value
when the value of object
rptrMonitorPortLastChange changes.
This statistic provides an indicator of the total
data transferred. The approximate minimum time
for rollover of this counter in a 10Mb/s repeater
is 58 minutes.
For ports receiving traffic at a maximum rate in
a 100Mb/s repeater, this counter can roll over
in less than 6 minutes. Since that amount of time
could be less than a management station's poll cycle
time, in order to avoid a loss of information a
management station is advised to also poll the
rptrMonitorPortUpper32Octets object, or to use the
64-bit counter defined by
rptrMonitorPortHCReadableOctets instead of the
two 32-bit counters.
Parsed from file VERTICAL-SNMP-REPEATER-MIB.mib
Module: VERTICAL-SNMP-REPEATER-MIB
Vendor: Vertical Networks, Inc.
Module: VERTICAL-SNMP-REPEATER-MIB
[Automatically extracted from oidview.com]
vrptrMonitorPortReadableOctets OBJECT-TYPE SYNTAX INTEGER { notSupported(-1), supported(0) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter in a 10Mb/s repeater is 58 minutes. For ports receiving traffic at a maximum rate in a 100Mb/s repeater, this counter can roll over in less than 6 minutes. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information a management station is advised to also poll the rptrMonitorPortUpper32Octets object, or to use the 64-bit counter defined by rptrMonitorPortHCReadableOctets instead of the two 32-bit counters." REFERENCE "[IEEE 802.3 Mgt], 30.4.3.1.5, aReadableOctets." ::= { vrptrMonitorPortEntry 4 }
vrptrMonitorPortReadableOctets OBJECT-TYPE SYNTAX INTEGER { notSupported(-1), supported(0) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter in a 10Mb/s repeater is 58 minutes. For ports receiving traffic at a maximum rate in a 100Mb/s repeater, this counter can roll over in less than 6 minutes. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information a management station is advised to also poll the rptrMonitorPortUpper32Octets object, or to use the 64-bit counter defined by rptrMonitorPortHCReadableOctets instead of the two 32-bit counters." REFERENCE "[IEEE 802.3 Mgt], 30.4.3.1.5, aReadableOctets." ::= { vrptrMonitorPortEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2338.4.2.3.1.1.1 | vrptrMonitorPortGroupIndex | 0 | 0 | This object identifies the group containing the port for which this entry contains information. |
1.3.6.1.4.1.2338.4.2.3.1.1.2 | vrptrMonitorPortIndex | 0 | 0 | This object identifies the port within the group for which this entry contains information. |
1.3.6.1.4.1.2338.4.2.3.1.1.3 | vrptrMonitorPortReadableFrames | 0 | 0 | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by on… |
1.3.6.1.4.1.2338.4.2.3.1.1.5 | vrptrMonitorPortFCSErrors | 0 | 0 | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError an… |
1.3.6.1.4.1.2338.4.2.3.1.1.6 | vrptrMonitorPortAlignmentErrors | 0 | 0 | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and C… |
1.3.6.1.4.1.2338.4.2.3.1.1.7 | vrptrMonitorPortFrameTooLongs | 0 | 0 | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2… |
1.3.6.1.4.1.2338.4.2.3.1.1.8 | vrptrMonitorPortShortEvents | 0 | 0 | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEv… |
1.3.6.1.4.1.2338.4.2.3.1.1.9 | vrptrMonitorPortRunts | 0 | 0 | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one t… |
1.3.6.1.4.1.2338.4.2.3.1.1.10 | vrptrMonitorPortCollisions | 0 | 0 | For a clause 9 repeater, this counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent … |
1.3.6.1.4.1.2338.4.2.3.1.1.11 | vrptrMonitorPortLateEvents | 0 | 0 | For a clause 9 repeater port, this counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variabl… |
1.3.6.1.4.1.2338.4.2.3.1.1.12 | vrptrMonitorPortVeryLongEvents | 0 | 0 | For a clause 9 repeater port, this counter is incremented by one for each CarrierEvent whose ActivityDuration is greater than the… |
1.3.6.1.4.1.2338.4.2.3.1.1.13 | vrptrMonitorPortDataRateMismatches | 0 | 0 | This counter is incremented by one for each frame received by this port that meets all of the conditions required by only one of … |
1.3.6.1.4.1.2338.4.2.3.1.1.14 | vrptrMonitorPortAutoPartitions | 0 | 0 | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause a… |
1.3.6.1.4.1.2338.4.2.3.1.1.15 | vrptrMonitorPortTotalErrors | 0 | 0 | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters… |
1.3.6.1.4.1.2338.4.2.3.1.1.16 | vrptrMonitorPortLastChange | 0 | 0 | The value of sysUpTime when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the port was cr… |
1.3.6.1.4.1.2338.4.2.3.1.1.17 | vrptrMonitorPortSentFrames | 0 | 0 | This object is the number of frames of valid frame length that have been sent on this port. This counter is incremented by one fo… |
1.3.6.1.4.1.2338.4.2.3.1.1.18 | vrptrMonitorPortSentOctets | 0 | 0 | This object is the number of octets contained in valid frames that have been sent on this port. This counter is incremented by Oc… |
1.3.6.1.4.1.2338.4.2.3.1.1.19 | vrptrMonitorPortDroppedFrames | 0 | 0 | This counter is incremented by one for each time the switch had dropped a frame due a buffer full event. A discontinuity may occur… |
1.3.6.1.4.1.2338.4.2.3.1.1.20 | vrptrMonitorPortOtherErrors | 1 | 1 | This counter is incremented by one for each time the repeater has detected an error which is not reported in any other error count… |