Device Id for the specified chip type
Parsed from file starne.mib.txt
Company: None
Module: STARNE-MIB
Device Id for the specified chip type
Parsed from file STARNE-MIB.mib
Module: STARNE-MIB
Vendor: Samsung Electronics Co., LTD.
Module: STARNE-MIB
[Automatically extracted from oidview.com]
starLoopbackCtrDeviceId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Device Id for the specified chip type" ::= { starLoopbackCtrEntry 4 }
starLoopbackCtrDeviceId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Device Id for the specified chip type" ::= { starLoopbackCtrEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.236.5.4.5.1.1 | starLoopbackCtrPortIndex | 0 | 0 | Port number for this loopback request |
1.3.6.1.4.1.236.5.4.5.1.2 | starLoopbackCtrVpi | 0 | 0 | VPI for this loopback request |
1.3.6.1.4.1.236.5.4.5.1.3 | starLoopbackCtrVci | 0 | 0 | VCI for this loopback request |
1.3.6.1.4.1.236.5.4.5.1.5 | starLoopbackCtrType | 0 | 0 | Type of loopback, OAM loopback F4, F5 or physical level loopback |
1.3.6.1.4.1.236.5.4.5.1.6 | starLoopbackCtrEndType | 0 | 0 | Loopback end type |
1.3.6.1.4.1.236.5.4.5.1.7 | starLoopbackCtrTxCellNo | 0 | 0 | Cell numbers to send request for loopback test |
1.3.6.1.4.1.236.5.4.5.1.8 | starLoopbackCtrTimetoWait | 0 | 0 | Interval in seconds to wait for the loopbacked cell to arrive after sending |
1.3.6.1.4.1.236.5.4.5.1.9 | starLoopbackCtrSetup | 0 | 0 | Setup request for specified command. All parameters related to each command should be preset before initiating this action |
1.3.6.1.4.1.236.5.4.5.1.10 | starLoopbackCtrMethod | 0 | 0 | Defines how cell is to be loopbacked. This field is only used for the receiver of the loopback |
1.3.6.1.4.1.236.5.4.5.1.11 | starLoopbackCtrGeneration | 0 | 0 | Defines how loopback cell is generated. This field is only used by the sender of the loopback |
1.3.6.1.4.1.236.5.4.5.1.12 | starLoopbackCtrInputType | 0 | 0 | Describes what information will be used to setup the loopback, either all of GCID or Vpi/Vci values |
1.3.6.1.4.1.236.5.4.5.1.13 | starLoopbackCtrPdhNum | 0 | 0 | Channel # used for PDH loopbacks |
1.3.6.1.4.1.236.5.4.5.1.14 | starLoopbackCtrCellSpeed | 0 | 0 | Future entry for how many cells to be generated per second |
1.3.6.1.4.1.236.5.4.5.1.15 | starLoopbackCtrGCIDNeId | 0 | 0 | Node Id from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.16 | starLoopbackCtrGCIDSlotIndex | 0 | 0 | Slot Id from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.17 | starLoopbackCtrGCIDPortIndex | 0 | 0 | Port Id from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.18 | starLoopbackCtrGCIDModuleIfType | 0 | 0 | starLoopbackCtrGCIDModuleIftype |
1.3.6.1.4.1.236.5.4.5.1.19 | starLoopbackCtrGCIDVpi | 0 | 0 | VPI from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.20 | starLoopbackCtrGCIDVci | 0 | 0 | VCI from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.21 | starLoopbackCtrGCIDDlci | 0 | 0 | DLCI from GCID when GCID Input type is selected and board is Frame Relay type |
1.3.6.1.4.1.236.5.4.5.1.22 | starLoopbackCtrGCIDTimeSlot | 0 | 0 | Timeslot from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.23 | starLoopbackCtrGCIDLeafNum | 0 | 0 | Lear number from GCID when GCID Input type is selected |
1.3.6.1.4.1.236.5.4.5.1.24 | starLoopbackCtrAssignedSessionNo | 0 | 0 | NMS Assigned session number for this loopback request |
1.3.6.1.4.1.236.5.4.5.1.25 | starLoopbackCtrArea | 0 | 0 | Method for loopback test |
1.3.6.1.4.1.236.5.4.5.1.26 | starLoopbackCtrChannelType | 0 | 0 | Defines the channel to be used for loopback test, either a User channel or a predefined test channel |
1.3.6.1.4.1.236.5.4.5.1.27 | starLoopbackCtrLastSetupResult | 0 | 0 | Success or failure of last setup request |
1.3.6.1.4.1.236.5.4.5.1.28 | starLoopbackCtrPortNum | 0 | 0 | port number of loopback test |
1.3.6.1.4.1.236.5.4.5.1.29 | starLoopbackCtrGenCellType | 0 | 0 | type of cell to be generated |