Method used to determine the IP Address. AUTO tries all protocols.
STATIC uses the configured address. DHCP, BOOTP, and RARP use only
that protocol.
Parsed from file BROTHER-MIB.mib
Module: BROTHER-MIB
Vendor: Brother Industries, Ltd.
Module: BROTHER-MIB
[Automatically extracted from oidview.com]
brpsTCPIPMethod OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol." ::= { brtcpip 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.1 | brpsTCPIPSupported | 0 | 0 | 0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP support is implemented by the firmware |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.2 | brpsTCPIPEnable | 0 | 0 | 0 indicates the TCP/IP protocol is not enabled. 1 indicates that the TCP/IP protocol is enabled. Writing a non-zero value will e… |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.3 | brpsTCPIPAddress | 0 | 0 | IP Address assigned to the print server. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.4 | brpsTCPIPSubnetMask | 0 | 0 | Subnet mask assigned to the print server. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.5 | brpsTCPIPGateway | 0 | 0 | Gateway/Router address assigned to the print server. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.7 | brpsTCPIPTimeout | 0 | 0 | Timeout used for LPD connections. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.8 | brpsTCPIPBootTries | 0 | 0 | Number of attempts to use BOOTP, RARP, and DHCP. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.9 | brpsTCPIPMaxWindow | 0 | 0 | Maximum window size for TCP connections. Due to resource limitations setting the window to values greater than 10240 is not reco… |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.10 | brpsTCPIPRARPNoSubnet | 0 | 0 | If enabled, do not set the subnet mask based on the RARP response. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.11 | brpsTCPIPRARPNoGateway | 0 | 0 | If enabled, do not set the gateway/router address based on the RARP response. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.12 | brpsTCPIPUpdate | 0 | 0 | Hardware MAC address to be updated. This value is write only. Will read back as zeros. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.13 | brpsTCPIPBanner | 0 | 0 | 0 indicates the LPR banner print is not enabled. 1 indicates that the LPR banner print is enabled. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.14 | brpsTCPIPFastTimeoutEnable | 0 | 0 | 0 indicates the fast timeout is not enabled. 1 indicates that the fast timeout is enabled. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.15 | brpsTCPIPLPRRetryEnable | 0 | 0 | 0 indicates the LPR print retry is not enabled. 1 indicates that the LPR print retry is enabled. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.16 | brpsTCPIPUseMethod | 0 | 0 | Method type that used set up TCP/IP configuration. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.17 | brpsTCPIPMethodServer | 0 | 0 | If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18 | brpsTCPIPAccessTable | 1 | 4 | This table represents the list of IP address of node that has parmittion for access.Up to 16 Netware addresses can be enabled. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.19 | brpsAdvancedTCPIPAccessSupported | 0 | 0 | 0 indicates the Advanced TCP/IP Access is not supported. 1 indicates Advanced TCP/IP Access support is implemented by the firmware |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.20 | brpsAdvancedTCPIPAccessEnable | 0 | 0 | 0 indicates the Advanced TCP/IP Access is not enabled. 1 indicates that the Advanced TCP/IP Access is enabled. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.21 | brpsAdvancedTCPIPAccessAdministratorIPAddress | 0 | 0 | Administrator IPAddress. |
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.22 | brpsAdvancedTCPIPAccessSetting | 0 | 0 | 0 indicates the Advanced TCP/IP Access is reject. 1 indicates that the Advanced TCP/IP Access is Accept. |