Reference record for OID 1.3.6.1.4.1.2468.1.2.1.1.7.2
- parent
- 1.3.6.1.4.1.2468.1.2.1.1.7 (upsControlGroup)
- node code
- 2
- node name
- upsControlUpsSleepTime
- dot oid
- 1.3.6.1.4.1.2468.1.2.1.1.7.2
- type
- OBJECT-TYPE
- asn1 oid
-
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ingrasys(2468) product(1) upsAgent(2) ushap(1) upsObjectGroup(1) upsControlGroup(7) upsControlUpsSleepTime(2)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ingrasys(2468) product(1) upsAgent(2) ushap(1) upsObjectGroup(1) upsControlGroup(7) upsControlUpsSleepTime(2)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ingrasys(2468) product(1) upsAgent(2) ushap(1) upsObjectGroup(1) upsControlGroup(7) upsControlUpsSleepTime(2)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ingrasys(2468) product(1) upsAgent(2) ushap(1) upsObjectGroup(1) upsControlGroup(7) upsControlUpsSleepTime(2)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ingrasys(2468) product(1) upsAgent(2) ushap(1) upsObjectGroup(1) upsControlGroup(7) upsControlUpsSleepTime(2)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ingrasys(2468) product(1) upsAgent(2) ushap(1) upsObjectGroup(1) upsControlGroup(7) upsControlUpsSleepTime(2)}
- iri oid
-
- /iso/identified-organization/dod/internet/private/enterprise/ingrasys/product/upsAgent/ushap/upsObjectGroup/upsControlGroup/upsControlUpsSleepTime
- /iso/identified-organization/dod/internet/private/enterprises/ingrasys/product/upsAgent/ushap/upsObjectGroup/upsControlGroup/upsControlUpsSleepTime
- /iso/org/dod/internet/private/enterprise/ingrasys/product/upsAgent/ushap/upsObjectGroup/upsControlGroup/upsControlUpsSleepTime
- /iso/org/dod/internet/private/enterprises/ingrasys/product/upsAgent/ushap/upsObjectGroup/upsControlGroup/upsControlUpsSleepTime
- /iso/iso-identified-organization/dod/internet/private/enterprise/ingrasys/product/upsAgent/ushap/upsObjectGroup/upsControlGroup/upsControlUpsSleepTime
- /iso/iso-identified-organization/dod/internet/private/enterprises/ingrasys/product/upsAgent/ushap/upsObjectGroup/upsControlGroup/upsControlUpsSleepTime
- iri by oid_info
- /ISO/Identified-Organization/6/1/4/1/2468/1/2/1/1/7/2
Description by circitor
The time in minutes for the UPS to go to sleep when
instructed. When in sleep mode, the UPS will not provide
output power regardless of the input line state. Once the
specified time has elapsed, output power will be restored.
This is a configuration setting. The UPS will not go to
sleep until told to do so by the manager from a management
station.
Any input value is allowed, however the UPS only recognizes
0 - 9999 minutes in one minute increments.
If the provided value is higher than the highest acceptable
value, the highest acceptable value is used.
Parsed from file USHA-MIB.mib
Module: USHA-MIB
Information by oid_info
Vendor: Ingrasys
Module: USHA-MIB
[Automatically extracted from oidview.com]
Information by circitor
upsControlUpsSleepTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in minutes for the UPS to go to sleep when
instructed. When in sleep mode, the UPS will not provide
output power regardless of the input line state. Once the
specified time has elapsed, output power will be restored.
This is a configuration setting. The UPS will not go to
sleep until told to do so by the manager from a management
station.
Any input value is allowed, however the UPS only recognizes
0 - 9999 minutes in one minute increments.
If the provided value is higher than the highest acceptable
value, the highest acceptable value is used."
::= { upsControlGroup 2 }
First Registration Authority (recovered by parent 1.3.6.1.4.1.2468)
Hsiao Ben
Brothers (5)
OID | Name | Sub children | Sub Nodes Total | Description |
1.3.6.1.4.1.2468.1.2.1.1.7.1 |
upsControlUpsShutdownDelay |
0 |
0 |
The delay in seconds the UPS remains on after being told to turn off. |
1.3.6.1.4.1.2468.1.2.1.1.7.3 |
upsControlUpsOnOffControl |
0 |
0 |
Setting this variable to control UPS output status. turnUpsOff(1) will set UPS turn off output after upsControlUpsShutdownDelay p… |
1.3.6.1.4.1.2468.1.2.1.1.7.4 |
upsControlShutdownParametersTable |
1 |
6 |
Table which describes the parametes for shutdown process when shutdown event occurs |
1.3.6.1.4.1.2468.1.2.1.1.7.5 |
upsControlWeeklyScheduleTable |
1 |
6 |
The table to schedule shutting down the ups by weekly. |
1.3.6.1.4.1.2468.1.2.1.1.7.6 |
upsControlSpecialScheduleTable |
1 |
6 |
The table to schedule shutting down the ups. |