Vendor: Netcomm, Ltd.
Module: DV2-MIB
[Automatically extracted from oidview.com]
sPvcEntry OBJECT-TYPE SYNTAX SPvcEntry ACCESS not-accessible STATUS mandatory INDEX { sPvcId } ::= { sPvcTable 1 }
sPvcEntry OBJECT-TYPE SYNTAX SPvcEntry ACCESS not-accessible STATUS mandatory INDEX { sPvcId } ::= { sPvcTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.251.1.1.18.8.1.1 | sPvcId | 0 | 0 | Slot-unique SPVC identifier. |
1.3.6.1.4.1.251.1.1.18.8.1.2 | sPvcCallId | 0 | 0 | Call identifier. |
1.3.6.1.4.1.251.1.1.18.8.1.3 | sPvcLink | 0 | 0 | The physical link for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.4 | sPvcAddress | 0 | 0 | The E.164 address for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.5 | sPvcForwardPeakCellRate | 0 | 0 | The forward user cell rate for an SPVC. The forward user cell rate is a measurement of bandwidth available to the initiating us… |
1.3.6.1.4.1.251.1.1.18.8.1.6 | sPvcForwardPeakMode | 0 | 0 | SPVC/SPVP Forward Peak Mode |
1.3.6.1.4.1.251.1.1.18.8.1.7 | sPvcBackwardPeakCellRate | 0 | 0 | The backward user cell rate for an SPVC. The backward user cell rate is a measurement of bandwidth available to the responding … |
1.3.6.1.4.1.251.1.1.18.8.1.8 | sPvcBackwardPeakMode | 0 | 0 | SPVC/SPVP Backward Peak Mode |
1.3.6.1.4.1.251.1.1.18.8.1.9 | sPvcForwardSustainableCellRate | 0 | 0 | The sustainable forward cell rate for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.10 | sPvcForwardMaxBurstSize | 0 | 0 | The forward maximum burst size for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.11 | sPvcForwardSustainableMode | 0 | 0 | SPVC/SPVP Forward Sustained Mode |
1.3.6.1.4.1.251.1.1.18.8.1.12 | sPvcBackwardSustainableCellRate | 0 | 0 | The sustainable backward cell rate for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.13 | sPvcBackwardMaxBurstSize | 0 | 0 | The backward maximum burst size for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.14 | sPvcBackwardSustainableMode | 0 | 0 | SPVC/SPVP Backward Sustained Mode |
1.3.6.1.4.1.251.1.1.18.8.1.15 | sPvcQoSClass | 0 | 0 | CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-lo… |
1.3.6.1.4.1.251.1.1.18.8.1.16 | sPvcSourceVci | 0 | 0 | The source virtual circuit identifier for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.17 | sPvcSourceVpi | 0 | 0 | The source virtual path identifier for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.18 | sPvcTargetVci | 0 | 0 | The target virtual circuit identifier for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.19 | sPvcTargetVpi | 0 | 0 | The target virtual path identifier for the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.20 | sPvcRetry | 0 | 0 | Retry timeout. Zero represents an infinite timeout. |
1.3.6.1.4.1.251.1.1.18.8.1.21 | sPvcConnectTime | 0 | 0 | Connect time in ms. |
1.3.6.1.4.1.251.1.1.18.8.1.22 | sPvcNumberRetries | 0 | 0 | Number of retries to attempt. Zero represents no limit. |
1.3.6.1.4.1.251.1.1.18.8.1.23 | sPvcFailures | 0 | 0 | A count of the SPVC setup failures. |
1.3.6.1.4.1.251.1.1.18.8.1.24 | sPvcAlertFailures | 0 | 0 | Describes the circumstances under which to issue an Alert message to the NMS. |
1.3.6.1.4.1.251.1.1.18.8.1.25 | sPvcCauseDiag | 0 | 0 | Cause and diagnostic codes. |
1.3.6.1.4.1.251.1.1.18.8.1.26 | sPvcType | 0 | 0 | If the SPVC entry is passive, it will not try to initiate a call. An active will attempt to build an SPVC at intervals set by th… |
1.3.6.1.4.1.251.1.1.18.8.1.27 | sPvcCallState | 0 | 0 | Sets the state of the SPVC. Set the value to invalid(3) to tear down the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.28 | sPvcStatus | 0 | 0 | Describes the state of the SPVC. |
1.3.6.1.4.1.251.1.1.18.8.1.29 | sPvcCauseDiagCode | 0 | 0 | Cause and diagnostic codes as defined in UNI-3.0 Annex E . |
1.3.6.1.4.1.251.1.1.18.8.1.30 | sPvcMulticast | 0 | 0 | pt-pt - point-to-point SPVC; pt-mpt - point-to-multipoint SPVC; bidirect-root: pt-mpt birection root. |