The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX
repeated for each explicit address. The S/L character
stands for Strict/Loose route.
This field is meaningless unless mplsPathInfoName
is not empty
Parsed from file mib-mpls.txt
Company: None
Module: MPLS-MIB
The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX
repeated for each explicit address. The S/L character
stands for Strict/Loose route.
This field is meaningless unless mplsPathInfoName
is not empty
Parsed from file MPLS-MIB.mib
Module: MPLS-MIB
Vendor: Juniper Networks, Inc.
Module: MPLS-MIB
[Automatically extracted from oidview.com]
mplsPathInfoExplicitRoute OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX
S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathInfoName is not empty" ::= { mplsLspInfoEntry 19 }
mplsPathInfoExplicitRoute OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX
S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathInfoName is not empty" ::= { mplsLspInfoEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.2.5.1.1 | mplsLspInfoName | 0 | 0 | Name of the Label Switched Path. |
| 1.3.6.1.4.1.2636.3.2.5.1.2 | mplsLspInfoState | 0 | 0 | The operational state of the LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.3 | mplsLspInfoOctets | 0 | 0 | The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to s… |
| 1.3.6.1.4.1.2636.3.2.5.1.4 | mplsLspInfoPackets | 0 | 0 | The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to … |
| 1.3.6.1.4.1.2636.3.2.5.1.5 | mplsLspInfoAge | 0 | 0 | The age (i.e., time from creation till now) of this LSP in 10-millisecond periods. |
| 1.3.6.1.4.1.2636.3.2.5.1.6 | mplsLspInfoTimeUp | 0 | 0 | The total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined… |
| 1.3.6.1.4.1.2636.3.2.5.1.7 | mplsLspInfoPrimaryTimeUp | 0 | 0 | The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contributi… |
| 1.3.6.1.4.1.2636.3.2.5.1.8 | mplsLspInfoTransitions | 0 | 0 | The number of state transitions (up -> down and down -> up) this LSP has undergone. |
| 1.3.6.1.4.1.2636.3.2.5.1.9 | mplsLspInfoLastTransition | 0 | 0 | The time in 10-millisecond units since the last transition occurred on this LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.10 | mplsLspInfoPathChanges | 0 | 0 | The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap… |
| 1.3.6.1.4.1.2636.3.2.5.1.11 | mplsLspInfoLastPathChange | 0 | 0 | The time in 10-millisecond units since the last change occurred on this LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.12 | mplsLspInfoConfiguredPaths | 0 | 0 | The number of paths configured for this LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.13 | mplsLspInfoStandbyPaths | 0 | 0 | The number of standby paths configured for this LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.14 | mplsLspInfoOperationalPaths | 0 | 0 | The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths. |
| 1.3.6.1.4.1.2636.3.2.5.1.15 | mplsLspInfoFrom | 0 | 0 | Source IP address of this LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.16 | mplsLspInfoTo | 0 | 0 | Destination IP address of this LSP. |
| 1.3.6.1.4.1.2636.3.2.5.1.17 | mplsPathInfoName | 0 | 0 | The name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fiel… |
| 1.3.6.1.4.1.2636.3.2.5.1.18 | mplsPathInfoType | 0 | 0 | The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unle… |
| 1.3.6.1.4.1.2636.3.2.5.1.20 | mplsPathInfoRecordRoute | 0 | 0 | The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of … |
| 1.3.6.1.4.1.2636.3.2.5.1.21 | mplsPathInfoBandwidth | 0 | 0 | The configured bandwidth for this LSP, in units of thousands of bits per second (Kbps). This field is meaningless unless mplsPath… |
| 1.3.6.1.4.1.2636.3.2.5.1.22 | mplsPathInfoCOS | 0 | 0 | The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bi… |
| 1.3.6.1.4.1.2636.3.2.5.1.23 | mplsPathInfoInclude | 0 | 0 | This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, … |
| 1.3.6.1.4.1.2636.3.2.5.1.24 | mplsPathInfoExclude | 0 | 0 | This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, … |
| 1.3.6.1.4.1.2636.3.2.5.1.25 | mplsPathInfoSetupPriority | 0 | 0 | The setup priority configured for this path. This field is meaningless unless mplsPathInfoName is not empty |
| 1.3.6.1.4.1.2636.3.2.5.1.26 | mplsPathInfoHoldPriority | 0 | 0 | The hold priority configured for this path. This field is meaningless unless mplsPathInfoName is not empty |
| 1.3.6.1.4.1.2636.3.2.5.1.27 | mplsPathInfoProperties | 0 | 0 | The set of configured properties for this path, expressed as a bit map. For example, if the path is an adaptive path, the bit co… |
| 1.3.6.1.4.1.2636.3.2.5.1.28 | mplsLspInfoAggrOctets | 0 | 0 | None |
| 1.3.6.1.4.1.2636.3.2.5.1.29 | mplsLspInfoAggrPackets | 0 | 0 | None |