The BFD Session Entry describes BFD session.
Parsed from file mib-jnx-bfd-exp.txt
Company: None
Module: BFD-STD-MIB
The BFD Session Entry describes BFD session.
Parsed from file BFD-STD-MIB.mib
Module: BFD-STD-MIB
Vendor: Juniper Networks, Inc.
Module: BFD-STD-MIB
[Automatically extracted from oidview.com]
bfdSessEntry OBJECT-TYPE SYNTAX BfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Entry describes BFD session." INDEX { bfdSessIndex } ::= { bfdSessTable 1 }
bfdSessEntry OBJECT-TYPE SYNTAX BfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Entry describes BFD session." INDEX { bfdSessIndex } ::= { bfdSessTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.1 | bfdSessIndex | 0 | 0 | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.2 | bfdSessApplicationId | 0 | 0 | This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MP… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.3 | bfdSessDiscriminator | 0 | 0 | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.4 | bfdSessRemoteDiscr | 0 | 0 | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.5 | bfdSessUdpPort | 0 | 0 | The UDP Port for BFD. The default value is the well-known value for this port. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.6 | bfdSessState | 0 | 0 | The perceived state of the BFD session. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.7 | bfdSessRemoteHeardFlag | 0 | 0 | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local syst… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.8 | bfdSessDiag | 0 | 0 | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.9 | bfdSessOperMode | 0 | 0 | This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of Asy… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.10 | bfdSessDemandModeDesiredFlag | 0 | 0 | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system w… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.11 | bfdSessEchoFuncModeDesiredFlag | 0 | 0 | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wis… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.12 | bfdSessControlPlanIndepFlag | 0 | 0 | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specific… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.13 | bfdSessAddrType | 0 | 0 | This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) ha… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.14 | bfdSessAddr | 0 | 0 | This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a speci… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.15 | bfdSessDesiredMinTxInterval | 0 | 0 | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Contro… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.16 | bfdSessDesiredMinRxInterval | 0 | 0 | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.17 | bfdSessDesiredMinEchoRxInterval | 0 | 0 | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of sup… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.18 | bfdSessDetectMult | 0 | 0 | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.19 | bfdSessStorType | 0 | 0 | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-acces… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.20 | bfdSessRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) s… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.21 | bfdSessAuthPresFlag | 0 | 0 | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local syste… |
| 1.3.6.1.4.1.2636.5.3.1.1.2.1.22 | bfdSessAuthenticationType | 0 | 0 | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set |