Source IP address for L2F control messages and data
packets that we send to this Home Gateway. If not
configured, we will use the
DefaultTunnelingSourceIpAddr from the VPOP
configuration. If that's not configured, we will use
the sourceIpAddress from the VPOP configuration. If
that's not configured, we will use the mgmt_addr from
the ip_services configuration.
Parsed from file aptis_config.mib.txt
Company: nortel
Module: APTIS-CONFIG-MIB
Vendor: Aptis
Module: APTIS-CONFIG-MIB (aptis_config.mib)
Type: TABULAR
Access: read-write
Syntax: IpAddress
Automatically extracted from www.mibdepot.com
l2FHomeGatewaySourceIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source IP address for L2F control messages and data packets that we send to this Home Gateway. If not configured, we will use the DefaultTunnelingSourceIpAddr from the VPOP configuration. If that's not configured, we will use the sourceIpAddress from the VPOP configuration. If that's not configured, we will use the mgmt_addr from the ip_services configuration." ::= { l2FHomeGatewayEntry 511 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2637.2.1.1350.1.1 | l2FHomeGatewayPathString | 0 | 0 | The absolute path to where this object resides in the Resource Manager tree. |
| 1.3.6.1.4.1.2637.2.1.1350.1.2 | l2FHomeGatewayRowStatus | 0 | 0 | This object is used to create a new row, or to modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2637.2.1.1350.1.3 | l2FHomeGatewayKeyValue | 0 | 0 | The Key for this instance of the object in the Resource Manager tree. |
| 1.3.6.1.4.1.2637.2.1.1350.1.11 | l2FHomeGatewayIPAddress | 0 | 0 | IP address of L2F Home Gateway |
| 1.3.6.1.4.1.2637.2.1.1350.1.12 | l2FHomeGatewayHostName | 0 | 0 | Fully Qualified Domain Name (DNS name) of L2F Home Gateway |
| 1.3.6.1.4.1.2637.2.1.1350.1.211 | l2FHomeGatewaySendName | 0 | 0 | Name to send as the NAS name in the L2F CONF packet to open a tunnel |
| 1.3.6.1.4.1.2637.2.1.1350.1.212 | l2FHomeGatewaySendPassword | 0 | 0 | Password to send to the Home Gateway when sending the L2F OPEN packet to open a tunnel |
| 1.3.6.1.4.1.2637.2.1.1350.1.213 | l2FHomeGatewayReceiveName | 0 | 0 | Name to expect from the Home Gateway in the received L2F CONF packet when opening a tunnel. If left blank, then the Home Gateway'… |
| 1.3.6.1.4.1.2637.2.1.1350.1.214 | l2FHomeGatewayReceivePassword | 0 | 0 | Password to expect from the Home Gateway when opening a tunnel. If left blank, then the Home Gateway's password will not be check… |
| 1.3.6.1.4.1.2637.2.1.1350.1.313 | l2FHomeGatewaySendChecksum | 0 | 0 | Include Checksum field in transmitted L2F frames |
| 1.3.6.1.4.1.2637.2.1.1350.1.314 | l2FHomeGatewayCheckChecksum | 0 | 0 | Check Checksum field in received L2F frames |
| 1.3.6.1.4.1.2637.2.1.1350.1.315 | l2FHomeGatewaySendUDPChecksum | 0 | 0 | Calculate and include UDP checksum in transmitted L2F frames |
| 1.3.6.1.4.1.2637.2.1.1350.1.411 | l2FHomeGatewayEchoInterval | 0 | 0 | Time (in seconds) between L2F Echo Request frames sent to the Home Gateway to determine if it is still responding. These frames w… |
| 1.3.6.1.4.1.2637.2.1.1350.1.412 | l2FHomeGatewayEchoRetries | 0 | 0 | The number of unanswered L2F Echo Request frames that will be sent to the Home Gateway before declaring the tunnel dead. |