This variable states which address length in octets.
In the case of Q922 format, the length indicates the
entire length of the address including the control
portion. Currently, on 2 octet address are supported
Parsed from file aptis_config.mib.txt
Company: None
Module: APTIS-CONFIG-MIB
This variable states which address length in octets.
In the case of Q922 format, the length indicates the
entire length of the address including the control
portion. Currently, on 2 octet address are supported
Parsed from file APTIS-CONFIG-MIB.mib
Module: APTIS-CONFIG-MIB
Vendor: Aptis Communications, Inc.
Module: APTIS-CONFIG-MIB
[Automatically extracted from oidview.com]
frInterfaceConfigFrDlcmiAddressLen OBJECT-TYPE SYNTAX INTEGER (2..4) ACCESS read-write STATUS mandatory DESCRIPTION "This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion. Currently, on 2 octet address are supported" ::= { frInterfaceConfigEntry 14 }
frInterfaceConfigFrDlcmiAddressLen OBJECT-TYPE SYNTAX INTEGER (2..4) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion. Currently, on 2 octet address are supported" DEFVAL { 2 } ::= { frInterfaceConfigEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2637.2.1.3001.1.1 | frInterfaceConfigPathString | 0 | 0 | The absolute path to where this object resides in the Resource Manager tree. |
1.3.6.1.4.1.2637.2.1.3001.1.2 | frInterfaceConfigRowStatus | 0 | 0 | This object is used to create a new row, or to modify or delete an existing row in this table. |
1.3.6.1.4.1.2637.2.1.3001.1.3 | frInterfaceConfigKeyValue | 0 | 0 | The Key for this instance of the object in the Resource Manager tree. |
1.3.6.1.4.1.2637.2.1.3001.1.11 | frInterfaceConfigFrDlcmiIfIndex | 0 | 0 | Unique identifier that identifies this Frame Relay Interface configuration |
1.3.6.1.4.1.2637.2.1.3001.1.12 | frInterfaceConfigFrDlcmiLMIType | 0 | 0 | This variable states which Data Link Connec- tion Management scheme is active on the Frame Relay interface. |
1.3.6.1.4.1.2637.2.1.3001.1.13 | frInterfaceConfigFrDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. Currently, on Q922 is supported. |
1.3.6.1.4.1.2637.2.1.3001.1.15 | frInterfaceConfigFrDlcmiPollingInterval | 0 | 0 | This is the number of seconds between successive status enquiry messages. This is equivalent to T391. |
1.3.6.1.4.1.2637.2.1.3001.1.16 | frInterfaceConfigFrDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry message. This is equivalent to N391. |
1.3.6.1.4.1.2637.2.1.3001.1.17 | frInterfaceConfigFrDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is… |
1.3.6.1.4.1.2637.2.1.3001.1.18 | frInterfaceConfigFrDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents… |
1.3.6.1.4.1.2637.2.1.3001.1.19 | frInterfaceConfigFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. Currently, any DL… |
1.3.6.1.4.1.2637.2.1.3001.1.20 | frInterfaceConfigFrDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service |
1.3.6.1.4.1.2637.2.1.3001.1.21 | frInterfaceConfigFrDlcmiLinkType | 0 | 0 | This indicates whether the Frame Relay interface is the Network-side of a UNI (UNI-DCE), User-side of a UNI (UNI-DTE) or a Networ… |
1.3.6.1.4.1.2637.2.1.3001.1.22 | frInterfaceConfigFrDlcmiMaxLogIntf | 0 | 0 | Maximum number of Logical Interfaces supported on this Frame Relay Interface |
1.3.6.1.4.1.2637.2.1.3001.1.23 | frInterfaceConfigFrDlcmiLinkEnable | 0 | 0 | Specifies whether this interface is to be activated. |
1.3.6.1.4.1.2637.2.1.3001.1.24 | frInterfaceConfigFrDlcmiLMIFlowControl | 0 | 0 | Specifies whether LMI based (R-bit) notification performs flow control for the Circuits on this interface. |
1.3.6.1.4.1.2637.2.1.3001.1.25 | frInterfaceConfigFrDlcmiBECNFlowControl | 0 | 0 | Specifies whether BECN notification performs flow control for the Circuits on this interface. |
1.3.6.1.4.1.2637.2.1.3001.1.26 | frInterfaceConfigFrDlcmiLMIBandwidthControl | 0 | 0 | Specifies whether LMI based CIR notification affects the CIR flow control parameters for the circuits on this interface. |
1.3.6.1.4.1.2637.2.1.3001.1.27 | frInterfaceConfigFrDlcmiInjectionManagement | 0 | 0 | Specifies whether injection management (for holding data to prevent exceeding excess rates) is enabled on all circuits on this in… |
1.3.6.1.4.1.2637.2.1.3001.1.28 | frInterfaceConfigFrDlcmiMaxFrameSize | 0 | 0 | Specifies maximum frame size allowed on this interface, including data link headers. |
1.3.6.1.4.1.2637.2.1.3001.1.29 | frInterfaceConfigFrDlcmiName | 0 | 0 | Frame Relay Interface Name |
1.3.6.1.4.1.2637.2.1.3001.1.30 | frInterfaceConfigFrDlcmiLmiDlci | 0 | 0 | The dlci upon which LMI traffic will be broadcast. |
1.3.6.1.4.1.2637.2.1.3001.1.31 | frInterfaceConfigFrDlcmiDceErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is… |
1.3.6.1.4.1.2637.2.1.3001.1.32 | frInterfaceConfigFrDlcmiDceMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents… |