A textual description of the cause which initiated
termination of this session. In cases where there are
multiple causes of session termination, only the first
cause detected is reported.
Parsed from file aptis_monitoring.mib.txt
Company: None
Module: APTIS-MONITOR-MIB
A textual description of the cause which initiated
termination of this session. In cases where there are
multiple causes of session termination, only the first
cause detected is reported.
Parsed from file APTIS-MONITOR-MIB.mib
Module: APTIS-MONITOR-MIB
Vendor: Aptis Communications, Inc.
Module: APTIS-MONITOR-MIB
[Automatically extracted from oidview.com]
sessionStatusReverseTerminationReason OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported." ::= { sessionStatusReverseEntry 53 }
sessionStatusReverseTerminationReason OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported." ::= { sessionStatusReverseEntry 53 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2637.2.2.106.1.2 | sessionStatusReverseSessionID | 0 | 0 | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session… |
| 1.3.6.1.4.1.2637.2.2.106.1.3 | sessionStatusReverseState | 0 | 0 | This variable indicates the state of this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.10 | sessionStatusReversePermanentFlag | 0 | 0 | This variable indicates whether this session is permanent(2), meaning a long-lasting locally administered session such as a Frame… |
| 1.3.6.1.4.1.2637.2.2.106.1.11 | sessionStatusReverseVpopId | 0 | 0 | The identifier of the VPOP (administrative Group) to which the session belongs. A value of 0 indicates the default VPOP. |
| 1.3.6.1.4.1.2637.2.2.106.1.12 | sessionStatusReverseName | 0 | 0 | The name of the connection peer for this session. During authentication of the session, this field may contain the name submitted… |
| 1.3.6.1.4.1.2637.2.2.106.1.13 | sessionStatusReverseRemoteIP | 0 | 0 | The connection peer's IP address. If the link is numbered, then this is the address assigned to the other end of the link. If the… |
| 1.3.6.1.4.1.2637.2.2.106.1.14 | sessionStatusReverseRemoteIPMask | 0 | 0 | The connection peer's IP address mask, used in conjunction with remoteIP. |
| 1.3.6.1.4.1.2637.2.2.106.1.15 | sessionStatusReverseLocalIP | 0 | 0 | The local IP address for this session. If the link is numbered, then this is the address assigned to the local end of the link. I… |
| 1.3.6.1.4.1.2637.2.2.106.1.16 | sessionStatusReverseLocalIPMask | 0 | 0 | The local IP address mask for this session, used in conjunction with localIP. |
| 1.3.6.1.4.1.2637.2.2.106.1.17 | sessionStatusReverseLinkService | 0 | 0 | A description of which link technology is being used by the session. |
| 1.3.6.1.4.1.2637.2.2.106.1.18 | sessionStatusReverseServiceMode | 0 | 0 | A description of which session service is being used by the session. |
| 1.3.6.1.4.1.2637.2.2.106.1.19 | sessionStatusReverseStartTime | 0 | 0 | The time that this session began, in seconds since the system booted. |
| 1.3.6.1.4.1.2637.2.2.106.1.20 | sessionStatusReverseStopTime | 0 | 0 | The time that this session stopped, in seconds since the system booted. This variable is only meaningful for sessions having the … |
| 1.3.6.1.4.1.2637.2.2.106.1.21 | sessionStatusReverseTimeOfModemSync | 0 | 0 | The time at which the modem synchronization completed, in seconds since the system booted. |
| 1.3.6.1.4.1.2637.2.2.106.1.22 | sessionStatusReverseTimeOfService | 0 | 0 | The time that this session entered its first negotiated or configured service, in seconds since the system booted. For example, f… |
| 1.3.6.1.4.1.2637.2.2.106.1.23 | sessionStatusReverseTerminatingComponent | 0 | 0 | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only … |
| 1.3.6.1.4.1.2637.2.2.106.1.24 | sessionStatusReverseTerminationCause | 0 | 0 | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the … |
| 1.3.6.1.4.1.2637.2.2.106.1.25 | sessionStatusReverseLastComponent | 0 | 0 | The last component which was connected in this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.26 | sessionStatusReverseLayer1Slot | 0 | 0 | The slot where the physical layer of this session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.27 | sessionStatusReverseLayer2Slot | 0 | 0 | The slot where the data link portion of this session is terminated |
| 1.3.6.1.4.1.2637.2.2.106.1.28 | sessionStatusReverseCalledNumber | 0 | 0 | 40 digit number of called station (if available) |
| 1.3.6.1.4.1.2637.2.2.106.1.29 | sessionStatusReverseCallingNumber | 0 | 0 | 40 digit number of calling station (if available) |
| 1.3.6.1.4.1.2637.2.2.106.1.30 | sessionStatusReverseOriginateMode | 0 | 0 | The direction of the physical layer call associated with this session |
| 1.3.6.1.4.1.2637.2.2.106.1.31 | sessionStatusReverseOctetsIn | 0 | 0 | The number of octets received from the remote user. This value will be zero until a session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.32 | sessionStatusReverseOctetsOut | 0 | 0 | The number of octets sent to the remote user. This value will be zero until a session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.33 | sessionStatusReversePacketsIn | 0 | 0 | The number of packets received from the remote user. This value will be zero until a session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.34 | sessionStatusReversePacketsOut | 0 | 0 | The number of packets sent to the remote user. This value will be zero until a session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.35 | sessionStatusReverseMultiLinkId | 0 | 0 | The multi-link identifier value for PPP calls where the multi-link protocol was negotiated. |
| 1.3.6.1.4.1.2637.2.2.106.1.36 | sessionStatusReversePort | 0 | 0 | The number of the DS1 for this session, relative to layer1Slot. |
| 1.3.6.1.4.1.2637.2.2.106.1.37 | sessionStatusReverseTimeslot | 0 | 0 | The number of the DS0 for this session, relative to port. |
| 1.3.6.1.4.1.2637.2.2.106.1.38 | sessionStatusReverseLinkCount | 0 | 0 | The number of sessions sharing the same remote IP address as this session. After a session is terminated, this value will represe… |
| 1.3.6.1.4.1.2637.2.2.106.1.39 | sessionStatusReverseTxStartDataRate | 0 | 0 | The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of ini… |
| 1.3.6.1.4.1.2637.2.2.106.1.40 | sessionStatusReverseRxStartDataRate | 0 | 0 | The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial … |
| 1.3.6.1.4.1.2637.2.2.106.1.41 | sessionStatusReverseTxEndDataRate | 0 | 0 | The transmit data rate at the end of a modem session. |
| 1.3.6.1.4.1.2637.2.2.106.1.42 | sessionStatusReverseRxEndDataRate | 0 | 0 | The receive data rate at the end of a modem session. |
| 1.3.6.1.4.1.2637.2.2.106.1.43 | sessionStatusReverseTxMinDataRate | 0 | 0 | The minimum transmit data rate during a modem session. |
| 1.3.6.1.4.1.2637.2.2.106.1.44 | sessionStatusReverseRxMinDataRate | 0 | 0 | The minimum receive data rate during a modem session. |
| 1.3.6.1.4.1.2637.2.2.106.1.45 | sessionStatusReverseTxMaxDataRate | 0 | 0 | The maximum transmit data rate during a modem session. |
| 1.3.6.1.4.1.2637.2.2.106.1.46 | sessionStatusReverseRxMaxDataRate | 0 | 0 | The maximum receive data rate during a modem session. |
| 1.3.6.1.4.1.2637.2.2.106.1.47 | sessionStatusReverseIop | 0 | 0 | The I/O processor where this session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.48 | sessionStatusReverseDmm | 0 | 0 | The Digital Modem Module where this session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.49 | sessionStatusReversePack | 0 | 0 | The integrated circuit pack where this session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.50 | sessionStatusReverseDevice | 0 | 0 | The modem/hdlc where this session is terminated. |
| 1.3.6.1.4.1.2637.2.2.106.1.51 | sessionStatusReverseTdmStream | 0 | 0 | The TDM highway stream associated with this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.52 | sessionStatusReverseTdmTimeSlot | 0 | 0 | The TDM highway time-slot associated with this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.54 | sessionStatusReverseDuration | 0 | 0 | The number of seconds this session has been active. |
| 1.3.6.1.4.1.2637.2.2.106.1.55 | sessionStatusReverseDurationHMS | 0 | 0 | The length of time this session has been active, expressed in DDD HH:MM:SSS.000. |
| 1.3.6.1.4.1.2637.2.2.106.1.56 | sessionStatusReverseSs7SessionId | 0 | 0 | A uniquie identifier for this session within the ss7 Network. If this call was not originated using ss7 signalling, this string w… |
| 1.3.6.1.4.1.2637.2.2.106.1.57 | sessionStatusReverseModemNumber | 0 | 0 | The individual modem where this session is terminated, numbered from one to the maximum number of modems on the slot card. |
| 1.3.6.1.4.1.2637.2.2.106.1.58 | sessionStatusReverseTunnelType | 0 | 0 | The tunneling protocol being used for this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.59 | sessionStatusReverseTunnelMediumType | 0 | 0 | The tunneling medium protocol being used for this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.60 | sessionStatusReverseTunnelServerAddress | 0 | 0 | The IP address of the remote machine terminating the tunnel for this session. |
| 1.3.6.1.4.1.2637.2.2.106.1.61 | sessionStatusReverseCallClass | 0 | 0 | The class of this call. |
| 1.3.6.1.4.1.2637.2.2.106.1.62 | sessionStatusReverseTandemPort | 0 | 0 | The port used for the outbound portion of a tandem call, if applicable. |
| 1.3.6.1.4.1.2637.2.2.106.1.63 | sessionStatusReverseTandemTimeslot | 0 | 0 | The timeslot used for the outbound portion of a tandem call, if applicable. |
| 1.3.6.1.4.1.2637.2.2.106.1.64 | sessionStatusReverseCallClassArray | 0 | 0 | An array of octets representing the class of this call. |
| 1.3.6.1.4.1.2637.2.2.106.1.65 | sessionStatusReverseCallClassLen | 0 | 0 | The number of octets in callClassArray. |
| 1.3.6.1.4.1.2637.2.2.106.1.66 | sessionStatusReverseActualAuthMethod | 0 | 0 | The actual authentication method which was used to gain access to services. Radius, Local, Remote. |
| 1.3.6.1.4.1.2637.2.2.106.1.67 | sessionStatusReverseModemModulation | 0 | 0 | For modem sessions, the modulation protocol used, if any. |
| 1.3.6.1.4.1.2637.2.2.106.1.68 | sessionStatusReverseModemErrorCorrection | 0 | 0 | For modem sessions, the error correction protocol used, if any. |
| 1.3.6.1.4.1.2637.2.2.106.1.69 | sessionStatusReverseModemDataCompression | 0 | 0 | For modem sessions, the data compression protocol used, if any. |
| 1.3.6.1.4.1.2637.2.2.106.1.70 | sessionStatusReverseModemTxBlocks | 0 | 0 | For modem sessions, the number of blocks transmitted by the modem. |
| 1.3.6.1.4.1.2637.2.2.106.1.71 | sessionStatusReverseModemRetransmits | 0 | 0 | For modem sessions, the number of packets retransmitted by the modem. |
| 1.3.6.1.4.1.2637.2.2.106.1.72 | sessionStatusReverseModemSNR | 0 | 0 | For modem sessions, the Signal-to-Noise Ratio measured at the start of the connection. This value is given in dB. |
| 1.3.6.1.4.1.2637.2.2.106.1.73 | sessionStatusReverseModemLocalRetrains | 0 | 0 | For modem sessions, the number of retrain requests sent by the local modem. |
| 1.3.6.1.4.1.2637.2.2.106.1.74 | sessionStatusReverseModemRemoteRetrains | 0 | 0 | For modem sessions, the number of retrain requests sent by the remote modem. |
| 1.3.6.1.4.1.2637.2.2.106.1.75 | sessionStatusReverseModemLocalRenegotiations | 0 | 0 | For modem sessions, the number of rate renegotiation requests sent by the local modem. |
| 1.3.6.1.4.1.2637.2.2.106.1.76 | sessionStatusReverseModemRemoteRenegotiations | 0 | 0 | For modem sessions, the number of rate renegotiation requests sent by the remote modem. |
| 1.3.6.1.4.1.2637.2.2.106.1.77 | sessionStatusReverseModemReceiveLineLevel | 0 | 0 | For modem sessions, the receive line signal level. This value is given in dB. |
| 1.3.6.1.4.1.2637.2.2.106.1.78 | sessionStatusReverseRemoteIPXNetwork | 0 | 0 | The IPX network assigned to the dial-up user. |
| 1.3.6.1.4.1.2637.2.2.106.1.79 | sessionStatusReverseRemoteIPXNode | 0 | 0 | The IPX Node number assisgned to the dial-up user |
| 1.3.6.1.4.1.2637.2.2.106.1.80 | sessionStatusReverseCleartcpRemoteIP | 0 | 0 | Cleartcp Remote IP Address |
| 1.3.6.1.4.1.2637.2.2.106.1.81 | sessionStatusReverseCleartcpRemotePort | 0 | 0 | Cleartcp Remote Port Address |
| 1.3.6.1.4.1.2637.2.2.106.1.82 | sessionStatusReverseTunnelId | 0 | 0 | Tunnel Id |
| 1.3.6.1.4.1.2637.2.2.106.1.83 | sessionStatusReverseLinkId | 0 | 0 | Link Id |