Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-TOKEN-MIB
[Automatically extracted from oidview.com]
tokenringIfEntry OBJECT-TYPE SYNTAX TokenRingIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { tokenringIfSlot } ::= { tokenringIfTable 1 }
tokenringIfEntry OBJECT-TYPE SYNTAX TokenRingIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { tokenringIfSlot } ::= { tokenringIfTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.272.4.11.1.1.1 | tokenringIfSlot | 0 | 0 | Unique Slot of the TokenRing interface. |
1.3.6.1.4.1.272.4.11.1.1.2 | tokenringIfState | 0 | 0 | The TokenRing adapter initialization state |
1.3.6.1.4.1.272.4.11.1.1.3 | tokenringIfRingRate | 0 | 0 | speed of the token ring. |
1.3.6.1.4.1.272.4.11.1.1.4 | tokenringIfEarlyTokenRelease | 0 | 0 | enable or disable early token release. This feature is only valid with the 16 Mbps ring rate |
1.3.6.1.4.1.272.4.11.1.1.5 | tokenringIfWrapInterface | 0 | 0 | enable or disable the wrap interface option. If enabled the ring insertion process is omitted and all user-transmit data appears … |
1.3.6.1.4.1.272.4.11.1.1.6 | tokenringIfMtu | 0 | 0 | The size of the largest datagram which can be sent/received on the interface, specified in octets. |
1.3.6.1.4.1.272.4.11.1.1.7 | tokenringIfOverwritePhysAddress | 0 | 0 | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. This overwrites the ad… |
1.3.6.1.4.1.272.4.11.1.1.8 | tokenringIfNAUN | 0 | 0 | The interface's address of the nearest upstream neighbour. |
1.3.6.1.4.1.272.4.11.1.1.9 | tokenringIfLineError | 0 | 0 | Count of line errors. This counter is incremented whenever 1) a frame is repeated or copied, and 2) the Error Detected Indicator … |
1.3.6.1.4.1.272.4.11.1.1.10 | tokenringIfBurstError | 0 | 0 | Count of burst errors. This counter is incremented whenever the interface detects the absence of transitions for five half-bit ti… |
1.3.6.1.4.1.272.4.11.1.1.11 | tokenringIfAriFciError | 0 | 0 | Count of ARI/FCI errors. This counter is incremented whenever the interface receives an Active Monitor Present (AMP) MAC frame wi… |
1.3.6.1.4.1.272.4.11.1.1.12 | tokenringIfLostFrameError | 0 | 0 | Count of lost frames errors. This counter is incremented whenever the interface is in transmit (stripping) mode and fails to rece… |
1.3.6.1.4.1.272.4.11.1.1.13 | tokenringIfReceiveCongestionError | 0 | 0 | Count of receive congestion errors. This counter is incremented whenever the interface in the repeat mode recognizes a frame addr… |
1.3.6.1.4.1.272.4.11.1.1.14 | tokenringIfFrameCopiedError | 0 | 0 | Count of frame copied errors. This counter is incremented whenever the interface in the receive/repeat mode recognizes a frame ad… |
1.3.6.1.4.1.272.4.11.1.1.15 | tokenringIfTokenError | 0 | 0 | tokenringIftokenError |
1.3.6.1.4.1.272.4.11.1.1.16 | tokenringIfDmaBusError | 0 | 0 | Count of DMA bus errors. This counter is counts the occurences of DMA bus errors that do not exceed the specified abort thresholds |
1.3.6.1.4.1.272.4.11.1.1.17 | tokenringIfDmaParityError | 0 | 0 | Count of DMA parity errors. This counter counts the occurences of DMA parity errors that do not exceed the specified abort thresh… |
1.3.6.1.4.1.272.4.11.1.1.18 | tokenringIfSoftError | 0 | 0 | Count of soft errors that occur during normal operation. A soft error is an error condition that temporarily degrades system perf… |
1.3.6.1.4.1.272.4.11.1.1.19 | tokenringIfSourceRouting | 0 | 0 | enable or disable source routing. If enabled, a routing information field is added to the frame sent over this interface. |