Vendor: BinTec Communications GmbH
Module: BIANCA-BOX-PABX-MIB
[Automatically extracted from oidview.com]
pabxTrunkEntry OBJECT-TYPE SYNTAX PabxTrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pabxTrunkNumber } ::= { pabxTrunkTable 1 }
pabxTrunkEntry OBJECT-TYPE SYNTAX PabxTrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pabxTrunkNumber } ::= { pabxTrunkTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.272.4.20.2.1.1 | pabxTrunkNumber | 0 | 0 | The object pabxTrunkNumber ranges from 0..31 and specifies a unique identification for the trunk line. |
1.3.6.1.4.1.272.4.20.2.1.2 | pabxTrunkDescr | 0 | 0 | Description text for the trunk-line. This object is for information only and not otherwise being used by the system. |
1.3.6.1.4.1.272.4.20.2.1.3 | pabxTrunkSlot | 0 | 0 | This object specifies the number of the physical slot the trunk-line is leading to. |
1.3.6.1.4.1.272.4.20.2.1.4 | pabxTrunkUnit | 0 | 0 | This object specifies the physical unit in the slot specified by pabxTrunkSlot. When there is only one unit in the slot, the unit… |
1.3.6.1.4.1.272.4.20.2.1.5 | pabxTrunkProtocol | 0 | 0 | This object specifies the protocol to be used on the trunk-line. Currently only dss1 is available. |
1.3.6.1.4.1.272.4.20.2.1.6 | pabxTrunkConfig | 0 | 0 | This object specifies, whether the trunk line is running in point-to-point or point-to-multipoint configuration. |
1.3.6.1.4.1.272.4.20.2.1.7 | pabxTrunkTeiProc | 0 | 0 | This object specifies the TEI procedure to be used with the trunk-line. The procedure may be either |
1.3.6.1.4.1.272.4.20.2.1.8 | pabxTrunkTeiValue | 0 | 0 | This object specifies the TEI value to be used for fixed TEI configurations and is ignored in automatic TEI configurations. |
1.3.6.1.4.1.272.4.20.2.1.9 | pabxTrunkCountryCode | 0 | 0 | This object specifies the country code of the trunk-line. This information has to be specified in point-to-point configurations, … |
1.3.6.1.4.1.272.4.20.2.1.10 | pabxTrunkAreaCode | 0 | 0 | This object specifies the area code of the trunk-line. This information has to be specified in point-to-point configurations, bec… |
1.3.6.1.4.1.272.4.20.2.1.11 | pabxTrunkSubscriberNo | 0 | 0 | This object specifies the subscriber number of the trunk-line. This information has to be specified in point-to-point configurati… |
1.3.6.1.4.1.272.4.20.2.1.12 | pabxTrunkExtension | 0 | 0 | This object specifies the extension number of the trunk-line. This information has to be specified in point-to-point configuratio… |
1.3.6.1.4.1.272.4.20.2.1.13 | pabxTrunkType | 0 | 0 | The trunk type identifies the purpose of an ISDN interface. Normal external trunks are identified with type 'external'. When casc… |
1.3.6.1.4.1.272.4.20.2.1.14 | pabxTrunkL2Mode | 0 | 0 | The TrunkL2Mode specifies the mode layer 2 is to operate in. To be able to use leased lines as well as back to back connections t… |