The layer1 protocol to be used for multiprotocol-routing
(incoming calls only).
Parsed from file mibpabx.mib.txt
Company: None
Module: BIANCA-BOX-PABX-MIB
The layer1 protocol to be used for multiprotocol-routing
(incoming calls only).
Parsed from file BIANCA-BOX-PABX-MIB.mib
Module: BIANCA-BOX-PABX-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BOX-PABX-MIB
[Automatically extracted from oidview.com]
pabxExtLayer1Prot OBJECT-TYPE SYNTAX INTEGER { auto(1), sync-64k(11), sync-56k(12), modem(13), v110-1200(15), v110-2400(16), v110-4800(17), v110-9600(18), v110-14400(19), v110-19200(20), v110-38400(21), modem-profile-1(26), modem-profile-2(27), modem-profile-3(28), modem-profile-4(29), modem-profile-5(30), modem-profile-6(31), modem-profile-7(32), modem-profile-8(33) } ACCESS read-write STATUS mandatory DESCRIPTION "The layer1 protocol to be used for multiprotocol-routing (incoming calls only)." ::= { pabxExtensionEntry 9 }
pabxExtLayer1Prot OBJECT-TYPE SYNTAX INTEGER { auto(1), sync-64k(11), sync-56k(12), modem(13), v110-1200(15), v110-2400(16), v110-4800(17), v110-9600(18), v110-14400(19), v110-19200(20), v110-38400(21), modem-profile-1(26), modem-profile-2(27), modem-profile-3(28), modem-profile-4(29), modem-profile-5(30), modem-profile-6(31), modem-profile-7(32), modem-profile-8(33) } ACCESS read-write STATUS mandatory DESCRIPTION "The layer1 protocol to be used for multiprotocol-routing (incoming calls only)." ::= { pabxExtensionEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.20.4.1.1 | pabxExtExtension | 0 | 0 | This object contains the extension, which is a dialable string consisting of the digits 0..9, * and #. |
| 1.3.6.1.4.1.272.4.20.4.1.2 | pabxExtType | 0 | 0 | Specifies the call types, for which the entry shall be valid. |
| 1.3.6.1.4.1.272.4.20.4.1.6 | pabxExtIpAddr | 0 | 0 | Specifies the ip-address, to which the call shall be routed if pabxExtDestination is set to internet-telephony. |
| 1.3.6.1.4.1.272.4.20.4.1.8 | pabxExtEAZ | 0 | 0 | The EAZ is to be used by 1TR6-based applications such as CAPI 1.1. and is only valid if the object pabxExtDestination is set to a… |
| 1.3.6.1.4.1.272.4.20.4.1.10 | pabxExtIfIndex | 0 | 0 | The interface index of the MPR interface to be used for the call. This object is valid for routing only. |
| 1.3.6.1.4.1.272.4.20.4.1.11 | pabxExtId | 0 | 0 | The id uniquely identifies an extension may be within the range from 0 to 2147483647. This id is used to refer to that extension … |
| 1.3.6.1.4.1.272.4.20.4.1.12 | pabxExtUserId | 0 | 0 | This identificator refers to the user the extension is associated with. Its default value is 0 meaning no particular user. |
| 1.3.6.1.4.1.272.4.20.4.1.13 | pabxExtTermId | 0 | 0 | This identificator refers to the terminal the extension is associated with. Its value must be a valid identificator, i.e. there m… |
| 1.3.6.1.4.1.272.4.20.4.1.14 | pabxExtDefaultExtFlag | 0 | 0 | This value specifies whether the extension should be used as a default extension (for outgoing calls) for the associated termina… |
| 1.3.6.1.4.1.272.4.20.4.1.15 | pabxExtPresentationNr | 0 | 0 | This field allows for specifying an extension that will be presented to externally called partners instead of the actual calling… |
| 1.3.6.1.4.1.272.4.20.4.1.16 | pabxExtOutsideCallSeq | 0 | 0 | Set the ringing sequence for incoming calls from outside |
| 1.3.6.1.4.1.272.4.20.4.1.17 | pabxExtInsideCallSeq | 0 | 0 | Set the ringing sequence for incoming calls inside the PABX. |
| 1.3.6.1.4.1.272.4.20.4.1.18 | pabxExtPresentationFlag | 0 | 0 | Specify when the presentation number should take effect. By default its value is 'off' defining the actual extension is to be use… |
| 1.3.6.1.4.1.272.4.20.4.1.19 | pabxExtProfileId | 0 | 0 | ProfileId holds an id specifying an applying profile entry in pabx profile table. If set to 0 no profile applies as 0 is not a va… |
| 1.3.6.1.4.1.272.4.20.4.1.20 | pabxExtCtrlByCapiApp | 0 | 0 | CtrlByCapiAppl indicates whether a capi application controls this extension. If set to on a special CAPI application registered f… |
| 1.3.6.1.4.1.272.4.20.4.1.21 | pabxExtCtrlByCapiAppNo | 0 | 0 | CtrlByCapiAppl indicates capi application number that controls extension in case pabxExtCtrlByCapiApp is set to on. |