Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-IPSEC-MIB
[Automatically extracted from oidview.com]
ipsecGlobals OBJECT IDENTIFIER ::= { ipsec 1 }
ipsecGlobals OBJECT IDENTIFIER ::= { ipsec 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.26.1.1 | ipsecGlobPeerIndex | 1 | 1 | Index of first IPsec peer in ipsecPeerTable. If this object is set to a Value <= 0, IPSec is switched explicitly off. If the peer referenced by this obj… |
| 1.3.6.1.4.1.272.4.26.1.2 | ipsecGlobDefaultAuthMethod | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.3 | ipsecGlobDefaultCertificate | 1 | 1 | The index of the default certificate in the certTable used for local authentication for ike keyed rules with non pre-shared-key a… |
| 1.3.6.1.4.1.272.4.26.1.4 | ipsecGlobDefaultLocalId | 1 | 1 | The default ID used for local authentication for ike keyed rules. If this is an empty or invaid id string one of the subject alt… |
| 1.3.6.1.4.1.272.4.26.1.5 | ipsecGlobDefaultIpsecProposal | 1 | 1 | Index of default ipsec proposal used for traffic entries with empty ipsec proposal, defined for peers with empty default ipsec pr… |
| 1.3.6.1.4.1.272.4.26.1.6 | ipsecGlobDefaultIkeProposal | 1 | 1 | Index of default ike proposal used for peers with empty default ike proposal. |
| 1.3.6.1.4.1.272.4.26.1.7 | ipsecGlobDefaultIpsecLifeTime | 1 | 1 | Index of default lifetime for ike SA's in ipsecLifeTimeTable. This lifetime is used, when there is no valid lifetime entry specif… |
| 1.3.6.1.4.1.272.4.26.1.8 | ipsecGlobDefaultIkeLifeTime | 1 | 1 | Index of default lifetime for ipsec SA's in ipsecLifeTimeTable. This lifetime is used, when there is no valid lifetime entry spe… |
| 1.3.6.1.4.1.272.4.26.1.9 | ipsecGlobDefaultIkeGroup | 1 | 1 | Index of default IKE group used if no IKE group is defined for a peer. Possible values: 1 (768 bit MODP), 2 (1024 bit MODP), 5 (153… |
| 1.3.6.1.4.1.272.4.26.1.10 | ipsecGlobMaxSysLogLevel | 1 | 1 | Maximum level for syslog messages issued by IPSec. All messages with a level higher than this value are suppressed, independently… |
| 1.3.6.1.4.1.272.4.26.1.11 | ipsecGlobDefaultGranularity | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.12 | ipsecGlobDefaultPh1Mode | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.13 | ipsecGlobDefaultPfsGroup | 1 | 1 | This object specifies the PFS group to use. PFS is done only for phase 2, i.e. the Phase 1 SAs are not deleted after phase 2 nego… |
| 1.3.6.1.4.1.272.4.26.1.20 | ipsecGlobIkePort | 1 | 1 | This object specifies the port the IKE key management service listens to. |
| 1.3.6.1.4.1.272.4.26.1.21 | ipsecGlobMaxRetries | 1 | 1 | This object specifies the maximum number of retries sent by IKE for one message. |
| 1.3.6.1.4.1.272.4.26.1.22 | ipsecGlobRetryTimeout0milli | 1 | 1 | This object specifies the period of time in milliseconds before an IKE message is repeated for the first time if the answer is mi… |
| 1.3.6.1.4.1.272.4.26.1.23 | ipsecGlobRetryTimeoutMaxsec | 1 | 1 | This object specifies the maximum period of time in seconds before an IKE message is repeated if the answer is missing. The retry… |
| 1.3.6.1.4.1.272.4.26.1.24 | ipsecGlobMaxNegotiationTimeoutsec | 1 | 1 | This object specifies the maximum number of seconds after which a negotiation is canceled if it is not finished. |
| 1.3.6.1.4.1.272.4.26.1.25 | ipsecGlobMaxIkeSas | 1 | 1 | This object specifies the maximum number of simultaneous ISAKMP Security associations allowed. If this limit is reached, the entr… |
| 1.3.6.1.4.1.272.4.26.1.26 | ipsecGlobAntiCloggingLength | 1 | 1 | This object specifies the length in bits of the local secret used for ISAKMP anti-clogging cookies. |
| 1.3.6.1.4.1.272.4.26.1.27 | ipsecGlobAntiCloggingHash | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.28 | ipsecGlobLocalSecretPeriodsec | 1 | 1 | This object specifies the period of time in seconds after which a new secret for creating local anti-clogging tokens is created. … |
| 1.3.6.1.4.1.272.4.26.1.29 | ipsecGlobIgnoreCrPayloads | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.30 | ipsecGlobNoCrPayloads | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.31 | ipsecGlobNoKeyHashPayloads | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.32 | ipsecGlobNoCrls | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.33 | ipsecGlobSendFullCertChains | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.34 | ipsecGlobTrustIcmpMsg | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.35 | ipsecGlobSpiSize | 1 | 1 | A compatibility flag that specifies the length of the SPI in bytes, which is used when an ISAKMP SA SPI (Cookie) is sent to the r… |
| 1.3.6.1.4.1.272.4.26.1.36 | ipsecGlobZeroIsakmpCookies | 1 | 1 | None |
| 1.3.6.1.4.1.272.4.26.1.37 | ipsecGlobMaxKeyLength | 1 | 1 | This object specifies the maximum length of an encryption key (in bits) that is accepted from the remote end. This limit prevents… |
| 1.3.6.1.4.1.272.4.26.1.38 | ipsecGlobNoInitialContact | 1 | 1 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.26.2 | ipsecPublicKeyTable | 1 | 7 | This table contains the list of public key pairs and ID's used with IPSec. |
| 1.3.6.1.4.1.272.4.26.3 | ipsecSaTable | 1 | 35 | This table contains the list of currently active IPSec security associations. |
| 1.3.6.1.4.1.272.4.26.4 | ikeSaTable | 1 | 23 | This table contains the list of currently active IKE security associations. |
| 1.3.6.1.4.1.272.4.26.5 | ipsecPeerTable | 1 | 32 | This table contains the list of IPSec peers. |
| 1.3.6.1.4.1.272.4.26.6 | ikeProposalTable | 1 | 9 | This table contains the list of IKE proposals. The entries may be concatenated on a logical or basis using the NextChoice field t… |
| 1.3.6.1.4.1.272.4.26.7 | ipsecTrafficTable | 1 | 32 | This table contains lists of Traffic and the actions which should be applied to it, together with the necessary parameters. |
| 1.3.6.1.4.1.272.4.26.8 | ipsecProposalTable | 1 | 33 | This table contains the list of IPSec proposals known to the system. The combinations of algorithms allowed are constructed from a… |
| 1.3.6.1.4.1.272.4.26.9 | ipsecLifeTimeTable | 1 | 7 | This table contains the list of defined lifetimes for IPsec and IKE SAs. |
| 1.3.6.1.4.1.272.4.26.10 | ipsecStats | 35 | 70 | None |
| 1.3.6.1.4.1.272.4.26.11 | ipsecGlobalsContinued | 21 | 42 | None |
| 1.3.6.1.4.1.272.4.26.12 | ipsecDialTable | 1 | 11 | This table contains dial entries specifying all parameters needed for ISDN triggered call back. |
| 1.3.6.1.4.1.272.4.26.13 | ipsecRadius | 2 | 4 | None |
| 1.3.6.1.4.1.272.4.26.33 | cert | 5 | 71 | None |
| 1.3.6.1.4.1.272.4.26.65 | binTable | 1 | 5 | The binTable contains chunks of binary data which can be chained to larger amounts of data, allowing to store objects of an arbit… |
| 1.3.6.1.4.1.272.4.26.66 | binFileTable | 1 | 6 | The binFileTable contains entries which combine a name and a set of binary data from the binTable to a file |
| 1.3.6.1.4.1.272.4.26.67 | binPublicTable | 1 | 5 | The binPublicTable contains chunks of binary data which can be chained to larger amounts of data, allowing to store objects of an… |