Vendor: Bintec
Module: BIANCA-BRICK-AOX-MIB (mibaox.mib)
Type: ENTRY
Access: not-accessible
Syntax: oamEntry
Automatically extracted from www.mibdepot.com
oamEntry OBJECT-TYPE SYNTAX oamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { oamPvcClientVpi,oamPvcClientVci } ::= { oamTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.29.3.1.1 | oamPvcClientVpi | 0 | 0 | Vpi. |
| 1.3.6.1.4.1.272.4.29.3.1.2 | oamPvcClientVci | 0 | 0 | Vci. |
| 1.3.6.1.4.1.272.4.29.3.1.3 | oamFlowLevel | 0 | 0 | The OAM hierarchical flow levels : VC (F5) or VP (F4). |
| 1.3.6.1.4.1.272.4.29.3.1.4 | oamLoopbackEnd2End | 0 | 0 | Indicates if OAM loopback is enabled from end to end connection. |
| 1.3.6.1.4.1.272.4.29.3.1.5 | oamLoopbackSegment | 0 | 0 | Indicates if OAM loopback is enabled onto the segment connection. |
| 1.3.6.1.4.1.272.4.29.3.1.6 | oamLoopbackTxTimer | 0 | 0 | OAM loopback transmit timer (in seconds). Default value = 5 |
| 1.3.6.1.4.1.272.4.29.3.1.7 | oamLoopbackTxCount | 0 | 0 | Specifies the number of OAM loopback cells to send to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.8 | oamLoopbackEnd2EndTxCells | 0 | 0 | The number of OAM loopback cells (for end to end) that have been sent to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.9 | oamLoopbackEnd2EndRxCells | 0 | 0 | The number of OAM loopback cells (for end to end) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.10 | oamLoopbackSegmentTxCells | 0 | 0 | The number of OAM loopback cells (for segment) that have been sent to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.11 | oamLoopbackSegmentRxCells | 0 | 0 | The number of OAM loopback cells (for segment) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.12 | oamCCEnd2End | 0 | 0 | Indicates if OAM continuity check activation request is activated from end to end connection. |
| 1.3.6.1.4.1.272.4.29.3.1.13 | oamCCSegment | 0 | 0 | Indicates if OAM continuity check activation request is activated onto the segment connection. |
| 1.3.6.1.4.1.272.4.29.3.1.14 | oamCCActivationResp | 0 | 0 | The OAM continuity check activation response. Could be confirm(1) or deny(2). |
| 1.3.6.1.4.1.272.4.29.3.1.15 | oamCCEnd2EndTxCells | 0 | 0 | The number of OAM continuity check cells (for end to end) that have been sent to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.16 | oamCCEnd2EndRxCells | 0 | 0 | The number of OAM continuity check cells (for end to end) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.17 | oamCCSegmentTxCells | 0 | 0 | The number of OAM continuity check cells (for segment) that have been sent to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.18 | oamCCSegmentRxCells | 0 | 0 | The number of OAM continuity check cells (for segment) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.19 | oamAisEnd2EndTxCells | 0 | 0 | The number of OAM alarm indication signal (AIS) cells (for end to end) that have been transmitted to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.20 | oamAisEnd2EndRxCells | 0 | 0 | The number of OAM alarm indication signal (AIS) cells (for end to end) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.21 | oamAisSegmentTxCells | 0 | 0 | The number of OAM alarm indication signal (AIS) cells (for segment) that have been transmitted to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.22 | oamAisSegmentRxCells | 0 | 0 | The number of OAM alarm indication signal (AIS) cells (for segment) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.23 | oamRdiEnd2EndTxCells | 0 | 0 | The number of OAM remote defect indication (RDI) cells (for end to end) that have been transmitted to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.24 | oamRdiEnd2EndRxCells | 0 | 0 | The number of OAM remote defect indication (RDI) cells (for end to end) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.25 | oamRdiSegmentTxCells | 0 | 0 | The number of OAM remote defect indication (RDI) cells (for segment) that have been transmitted to the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.26 | oamRdiSegmentRxCells | 0 | 0 | The number of OAM remote defect indication (RDI) cells (for segment) that have been received from the target in this sequence. |
| 1.3.6.1.4.1.272.4.29.3.1.27 | oamCCEnd2EndDirection | 0 | 0 | Indicates OAM continuity check direction (for end to end). Possible directions are : B-A (1), A-B (2) and two-way (3). |
| 1.3.6.1.4.1.272.4.29.3.1.28 | oamCCSegmentDirection | 0 | 0 | Indicates OAM continuity check direction (for segment). Possible directions are : B-A (1), A-B (2) and two-way (3). |