The maximum number of channels bundled for this interface.
Parsed from file mibppp.mib.txt
Company: None
Module: BIANCA-BRICK-PPP-MIB
The maximum number of channels bundled for this interface.
Parsed from file BIANCA-BRICK-PPP-MIB.mib
Module: BIANCA-BRICK-PPP-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-PPP-MIB
[Automatically extracted from oidview.com]
biboPPPMaxConn OBJECT-TYPE SYNTAX INTEGER (0..250) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of channels bundled for this interface." ::= { biboPPPEntry 16 }
biboPPPMaxConn OBJECT-TYPE SYNTAX INTEGER (0..250) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of channels bundled for this interface." ::= { biboPPPEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.3.1.1.1 | biboPPPIfIndex | 0 | 0 | Correlating PPP interface index. This value is assigned automatically by the system. |
| 1.3.6.1.4.1.272.4.3.1.1.2 | biboPPPType | 0 | 0 | The type of link. A new dialup link is created when this field is set to the value isdn-dialup(1), dialin-only(3) or multiuser(5)… |
| 1.3.6.1.4.1.272.4.3.1.1.3 | biboPPPEncapsulation | 0 | 0 | The layer 2 encapsulation of the link. The use of ppp(1) as described in RFC 1661 is the preferred encapsulation for point-to-poi… |
| 1.3.6.1.4.1.272.4.3.1.1.4 | biboPPPKeepalive | 0 | 0 | When set to on(1), keepalive packets are sent in regular intervals during the connection. Keepalive packets can not be sent using… |
| 1.3.6.1.4.1.272.4.3.1.1.5 | biboPPPTimeout | 0 | 0 | The number of milliseconds waiting before retransmitting a PPP configure packet. |
| 1.3.6.1.4.1.272.4.3.1.1.6 | biboPPPCompression | 0 | 0 | The throughput can be enhanced up to factor three using the V42bis compression method or the Stac LZS compression algorithm. V42b… |
| 1.3.6.1.4.1.272.4.3.1.1.7 | biboPPPAuthentication | 0 | 0 | The type of authentication used on the point-to-point link as described in RFC 1334. The authentication protocol supports pap(2) … |
| 1.3.6.1.4.1.272.4.3.1.1.8 | biboPPPAuthIdent | 0 | 0 | The remote authentication identification string. The local authentication identification string is taken from the contents of the… |
| 1.3.6.1.4.1.272.4.3.1.1.9 | biboPPPAuthSecret | 0 | 0 | The authentication secret, which is used symmetrically for both local and remote sides of the PPP link. |
| 1.3.6.1.4.1.272.4.3.1.1.10 | biboPPPIpAddress | 0 | 0 | The IP control protocol as described in RFC1332 has a means of negotiating IP-addresses. When this option is set to dynamic-serve… |
| 1.3.6.1.4.1.272.4.3.1.1.11 | biboPPPRetryTime | 0 | 0 | Time in seconds to wait before retrying a call; currently not used. |
| 1.3.6.1.4.1.272.4.3.1.1.12 | biboPPPBlockTime | 0 | 0 | Time in seconds to wait after a connection failure (e.g. the number of biboPPPMaxRetries calls failed). When set to zero, the int… |
| 1.3.6.1.4.1.272.4.3.1.1.13 | biboPPPMaxRetries | 0 | 0 | The number of dialup retries before changing to the blocked state. |
| 1.3.6.1.4.1.272.4.3.1.1.14 | biboPPPShortHold | 0 | 0 | The time in seconds to wait, once the channel is silent, (that is, no data is being received or transmitted) before terminating t… |
| 1.3.6.1.4.1.272.4.3.1.1.15 | biboPPPInitConn | 0 | 0 | The number of channels to initially set up for this interface. |
| 1.3.6.1.4.1.272.4.3.1.1.17 | biboPPPMinConn | 0 | 0 | The minimum number of channels bundled for this interface. |
| 1.3.6.1.4.1.272.4.3.1.1.18 | biboPPPCallback | 0 | 0 | If this object is enabled(1), and the call is recognized by the dialed number then calls are never accepted, and a callback is fo… |
| 1.3.6.1.4.1.272.4.3.1.1.19 | biboPPPLayer1Protocol | 0 | 0 | This entry is used to select the layer 1 protocol settings for this partner. Normally the correct entry is hdlc-64. |
| 1.3.6.1.4.1.272.4.3.1.1.20 | biboPPPLoginString | 0 | 0 | A textual string containing a login sequence (script) composed of fields in the format [expect send], comparable to chat scripts … |
| 1.3.6.1.4.1.272.4.3.1.1.21 | biboPPPVJHeaderComp | 0 | 0 | This entry is used to enable Van Jacobsen TCP/IP header compression, which reduces the size of TCP/IP packet headers and increase… |
| 1.3.6.1.4.1.272.4.3.1.1.22 | biboPPPLayer2Mode | 0 | 0 | This object specifies the layer 2 mode to be used for a connection. It is only relevant, if the Encapsulation involves an LAPB pr… |
| 1.3.6.1.4.1.272.4.3.1.1.23 | biboPPPDynShortHold | 0 | 0 | Optimizes idle time disconnects depending on the charging information received during the connection. This value specifies the mi… |
| 1.3.6.1.4.1.272.4.3.1.1.24 | biboPPPLocalIdent | 0 | 0 | This is the local identification string used for PPP authentication(PAP/CHAP). If this entry is empty the variable biboAdmLocalPP… |
| 1.3.6.1.4.1.272.4.3.1.1.25 | biboPPPDNSNegotiation | 0 | 0 | The IP control protocol extensions as described in RFC 1877 has a means of negotiating primary and secondary Domain Name System (… |
| 1.3.6.1.4.1.272.4.3.1.1.26 | biboPPPEncryption | 0 | 0 | This field specifies the data encryption scheme for en(de)crypting PPP encapsulated multi-protocol datagrams. Setting to mppe-40(… |
| 1.3.6.1.4.1.272.4.3.1.1.27 | biboPPPLQMonitoring | 0 | 0 | This parameter enables (2) or disables (1) PPP Link Quality Monitoring (LQM) according RFC 1989. When set to on(2) LQM is added t… |
| 1.3.6.1.4.1.272.4.3.1.1.28 | biboPPPIpPoolId | 0 | 0 | Pool ID value to select an IP address pool for dynamic IP address assignment via IPCP. See also PPPIpAssignTable for further deta… |
| 1.3.6.1.4.1.272.4.3.1.1.29 | biboPPPSessionTimeout | 0 | 0 | Maximum number of seconds before termination the established PPP session, regardless there is any data throughput on the correspo… |
| 1.3.6.1.4.1.272.4.3.1.1.30 | biboPPPLayer1DiscDelay | 0 | 0 | This parameter specifies wether the link (layer 1) should be disconnected immediately (after receiving a layer 2 disconnect) or d… |