Contains the current state of the endpoint. This is a
bitmap of possible conditions. The various bit positions
are:
noDefect There no defects on the line.
powerBackoff Indicates enhanced Power Backoff.
deviceFault Indicates a vendor-dependent
diagnostic or self-test fault
has been detected.
dcContinuityFault Indicates vendor-dependent
conditions that interfere with
span powering such as short and
open circuits.
snrMarginAlarm Indicates that the SNR margin
has dropped below the alarm threshold.
loopAttenuationAlarm Indicates that the loop attenuation
exceeds the alarm threshold.
(not supported by GlobeSpan !)
loswFailureAlarm Indicates a forward LOSW alarm.
configInitFailure Endpoint failure during initialization
due to paired endpoint not able to
support requested configuration.
protocolInitFailure Endpoint failure during initialization
due to incompatible protocol used by
the paired endpoint.
noNeighborPresent Endpoint failure during initialization
due to no activation sequence detected
from paired endpoint.
loopbackActive A loopback is currently active at this
Segment Endpoint.
This is intended to supplement ifOperStatus. Note that there
is a 1-1 relationship between the status bits defined in this
object and the notification thresholds defined elsewhere in
this MIB.
Parsed from file mibhdsl2shdsl.mib.txt
Company: bintec
Module: BIANCA-BRICK-HDSL2SHDSL-MIB
Vendor: Bintec
Module: BIANCA-BRICK-HDSL2SHDSL-MIB (mibhdsl2shdsl.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
hdsl2ShdslEndpointCurrStatus OBJECT-TYPE SYNTAX INTEGER { noDefect(1), powerBackoff(2), deviceFault(3), dcContinuityFault(4), snrMarginAlarm(5), loswFailureAlarm(7), configInitFailure(8), protocolInitFailure(9), noNeighborPresent(10), loopbackActive(11) } ACCESS read-only STATUS mandatory DESCRIPTION "Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. (not supported by GlobeSpan !) loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this Segment Endpoint. This is intended to supplement ifOperStatus. Note that there is a 1-1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB." ::= { hdsl2ShdslEndpointCurrEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.35.1.1.5.1.1 | hdsl2ShdslEndpointCurrIfIndex | 0 | 0 | This object specifies the associated interface index of this HDSL2/SHDSL line. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.2 | hdsl2ShdslEndpointCurrReceivedBlks | 0 | 0 | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.3 | hdsl2ShdslEndpointCurrTransmittedBlks | 0 | 0 | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.4 | hdsl2ShdslEndpointCurrCorrectedBlks | 0 | 0 | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.5 | hdsl2ShdslEndpointCurrUncorrectBlks | 0 | 0 | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.6 | hdsl2ShdslEndpointCurrAtn | 0 | 0 | The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.7 | hdsl2ShdslEndpointCurrSnrMgn | 0 | 0 | The current SNR margin for this endpoint as reported in a Status Response/SNR message. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.9 | hdsl2ShdslEndpointES | 0 | 0 | Count of Errored Seconds (ES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.10 | hdsl2ShdslEndpointSES | 0 | 0 | Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.11 | hdsl2ShdslEndpointCRCanomalies | 0 | 0 | Count of CRC anomalies on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.12 | hdsl2ShdslEndpointLOSWS | 0 | 0 | Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.13 | hdsl2ShdslEndpointUAS | 0 | 0 | Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.14 | hdsl2ShdslEndpointCurr15MinReceivedBlks | 0 | 0 | Count of all encoded blocks received on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.15 | hdsl2ShdslEndpointCurr15MinTransmittedBlks | 0 | 0 | Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.16 | hdsl2ShdslEndpointCurr15MinCorrectedBlks | 0 | 0 | Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.17 | hdsl2ShdslEndpointCurr15MinUncorrectBlks | 0 | 0 | Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.18 | hdsl2ShdslEndpointCurr15MinTimeElapsed | 0 | 0 | Total elapsed seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.19 | hdsl2ShdslEndpointCurr15MinES | 0 | 0 | Count of Errored Seconds (ES) in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.20 | hdsl2ShdslEndpointCurr15MinSES | 0 | 0 | Count of Severely Errored Seconds (SES) in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.21 | hdsl2ShdslEndpointCurr15MinCRCanomalies | 0 | 0 | Count of CRC anomalies in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.22 | hdsl2ShdslEndpointCurr15MinLOSWS | 0 | 0 | Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.23 | hdsl2ShdslEndpointCurr15MinUAS | 0 | 0 | Count of Unavailable Seconds (UAS) in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.24 | hdsl2ShdslEndpointCurr1DayReceivedBlks | 0 | 0 | Count of all encoded blocks received on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapse… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.25 | hdsl2ShdslEndpointCurr1DayTransmittedBlks | 0 | 0 | Count of all encoded blocks transmitted on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeEla… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.26 | hdsl2ShdslEndpointCurr1DayCorrectedBlks | 0 | 0 | Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by hdsl2ShdslEn… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.27 | hdsl2ShdslEndpointCurr1DayUncorrectBlks | 0 | 0 | Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by hdsl2ShdslEndpoint… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.28 | hdsl2ShdslEndpointCurr1DayTimeElapsed | 0 | 0 | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.29 | hdsl2ShdslEndpointCurr1DayES | 0 | 0 | Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.30 | hdsl2ShdslEndpointCurr1DaySES | 0 | 0 | Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.31 | hdsl2ShdslEndpointCurr1DayCRCanomalies | 0 | 0 | Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.32 | hdsl2ShdslEndpointCurr1DayLOSWS | 0 | 0 | Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.33 | hdsl2ShdslEndpointCurr1DayUAS | 0 | 0 | Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |