This object is used to enable or disable the recording of
individual usage counts for FR SVC circuits terminating on
this port. This object is a bit field, where a '1' represents
'record counts', and a '0' represents 'do not record counts'.
The bit positions are defined as follows (bit 0 = LSB):
0: received bytes
1: received frames
2: received DE bytes
3: sent bytes
4: sent frames
5: sent DE bytes
The default value is 0x01 (record received bytes only).
Note: usage records are not generated if SVC Recording
(fracctControl, fracctLportSvcControl) is disabled.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
fracctLportSvcUsageMeasurement OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the recording of individual usage counts for FR SVC circuits terminating on this port. This object is a bit field, where a '1' represents 'record counts', and a '0' represents 'do not record counts'. The bit positions are defined as follows (bit 0 = LSB): 0: received bytes 1: received frames 2: received DE bytes 3: sent bytes 4: sent frames 5: sent DE bytes The default value is 0x01 (record received bytes only). Note: usage records are not generated if SVC Recording (fracctControl, fracctLportSvcControl) is disabled." ::= { fracctLportEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.10.29.1.1 | fracctLportIfIndex | 0 | 0 | Index: logical-port identifier. |
| 1.3.6.1.4.1.277.1.10.29.1.2 | fracctLportSvcOrigControl | 0 | 0 | This object defines the ability to enable and disable FR SVC accounting of SVCs that originate on this logical port. When the val… |
| 1.3.6.1.4.1.277.1.10.29.1.3 | fracctLportSvcTermControl | 0 | 0 | This object defines the ability to enable and disable FR SVC accounting of SVCs that terminate on this logical port. When the val… |
| 1.3.6.1.4.1.277.1.10.29.1.4 | fracctLportSvcDefaultAddress | 0 | 0 | This object defines a Default Billing Address for FR SVCs which originate at his lport. Note that this address may be different … |
| 1.3.6.1.4.1.277.1.10.29.1.5 | fracctLportSvcDefaultAddressType | 0 | 0 | This object identifies the type of FR address that is to be used as the default billing address for SVCs originating on this logi… |
| 1.3.6.1.4.1.277.1.10.29.1.6 | fracctLportSvcUnsuccRecording | 0 | 0 | This object is used to enable or disable the recording of usage information for unsuccessful FR SVCs that originate or terminate … |
| 1.3.6.1.4.1.277.1.10.29.1.7 | fracctLportSvcSubAddressRecording | 0 | 0 | This object is used to enable or disable the recording of the Sub-addresses in FR SVC accounting records at the UNI. disabled … |
| 1.3.6.1.4.1.277.1.10.29.1.9 | fracctLportSvcParamRecording | 0 | 0 | This object controls the recording of FR SVC parameters when usage measurement is enabled for this port. When set to enabled(2),… |
| 1.3.6.1.4.1.277.1.10.29.1.10 | fracctLportSvcIntraAfrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork FR AFR SVCs at the UNI. The switch will generate usage da… |
| 1.3.6.1.4.1.277.1.10.29.1.11 | fracctLportSvcIntraCfrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork FR CFR SVCs at the UNI. The switch will generate usage da… |
| 1.3.6.1.4.1.277.1.10.29.1.12 | fracctLportSvcIntraUfrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork FR UFR SVCs at the UNI. The switch will generate usage da… |
| 1.3.6.1.4.1.277.1.10.29.1.13 | fracctLportSvcIntraVfrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork FR VFR SVCs at the UNI. The switch will generate usage da… |